esPointInEventState

SITEBOSS-530-STD-MIB · .1.3.6.1.4.1.3052.12.1.1.1.1.5

Object

column r/w SNMPv2-SMIInteger32

A number referring to the event state of a point
on an EventSensor.  This number can have different
meanings depending on the point class.
              
If the point class is temperature, humidity, or
analog input, then the values of this object are:
1=very low
2=low
3=normal
4=high
5=very high
              
For contact closures the values of this object are:
1=point in event state
2=point in normal state
              
For outputs the values of this object is the numeric
code for the logical state of the output: 1 or 2.  The
logical state of the output is either active/inactive for
relay outputs or on/off for power outputs.  The logical
state of the output has different nomenclature depending
on the type of the output (relay output or power output):
              
1=active (for relay output) or on (for power output)
2=inactive (for relay output) or off (for power output)
              
This is not necessarily representative of physical state
of the output.  Physical state is energized/de-energized,
for both relay and power outputs.  For relay outputs,
the active logical state corresponds to either the energized
physical state or the de-energized physical state depending
on how the relay output is configured.  For power outputs,
the on logical state always corresponds to the energized
physical state.
              
For any point class and any point, if the event
state is undefined, then the value of this object
is 0.
              
For any point class except output, this object is read-only.
For outputs, setting this object to 1 puts the output into
its active logical state.
              
Setting this object to 2 puts the output into its inactive
logical state.
              
Setting this object to any value greater than 2 puts the
output into its active logical state for that many seconds
(up to 3600), after which time it puts the output into its
inactive logical state.

Context

MIB: SITEBOSS-530-STD-MIB
OID: .1.3.6.1.4.1.3052.12.1.1.1.1.5
Type: column
Access: readwrite
Status: current
Parent: esPointEntry
Table: esPointTable
Siblings: 10

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Object Constraints

range: 1-32

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
esIndexES The part of the point index that refers to an EventSensor. The point index is a string of 3 numbers separated by periods. It contains all the information necessary…	column	Integer32	`.1.3.6.1.4.1.3052.12.1.1.1.1.1`
esPointAliasValueStr For CC inputs, this is the CC active/inactive alias setting setting value that currently corresponds to the event state. So if the CC input is in the event state, then this object…	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.3052.12.1.1.1.1.10`
esPointClassValueStr For CC inputs, this is the CC active/inactive class setting setting value that currently corresponds to the event state. So if the CC input is in the event state, then this object…	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.3052.12.1.1.1.1.11`
esIndexPC The part of the point index that refers to point class. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for…	column	Integer32	`.1.3.6.1.4.1.3052.12.1.1.1.1.2`
esIndexPoint The part of the point index that delineates which sensor on the EventSensor. So this combined with esIndexPC (Point Class or type) and esIndexES (which EventSensor)…	column	Integer32	`.1.3.6.1.4.1.3052.12.1.1.1.1.3`
esPointName The name of the point on an EventSensor. For example, 'AC temp' (in the case of the temperature sensor on an EventSensor). There can be multiple points of the same …	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.3052.12.1.1.1.1.4`
esPointValueInt A read-only number referring to the value of a point on an EventSensor. If the point class is temperature, then this object is the temperature in its configured sca…	column	Integer32	`.1.3.6.1.4.1.3052.12.1.1.1.1.6`
esPointValueStr A string referring to the value of a point on an EventSensor. For contact closures this object is either 'Open' or 'Closed'. For outputs this object …	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.3052.12.1.1.1.1.7`
esPointTimeLastChange The time of the last time an event was triggerred for a point on an EventSensor in MM/DD/YY HH:MM:SS format. For contact closures, the possible events are Active an…	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.3052.12.1.1.1.1.8`
esPointTimetickLastChange The time of the last time an event was triggerred for a point on an EventSensor in 100ths of seconds since reset. For contact closures, the possible events are Acti…	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.3052.12.1.1.1.1.9`