acpmsRPPhaseCValueStr

SITEBOSS-530-STD-MIB · .1.3.6.1.4.1.3052.12.1.8.1.1.31
MIB view Table view

Object

column SNMPv2-TCDisplayString 
Phase C real power, in watts. On the YD2010, this is calculated using
the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is
the voltage range taken from register 0x30A. On the WattsOn, this is
calculated using the formula (register * PT * CT).

Context

MIB
SITEBOSS-530-STD-MIB
OID
.1.3.6.1.4.1.3052.12.1.8.1.1.31
Type
column
Access
readonly
Status
current
Parent
acpmStatusEntry
Table
acpmStatusTable
Siblings
56

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
acpmsIndex
Index for AC power monitors
columnInteger32.1.3.6.1.4.1.3052.12.1.8.1.1.1
acpmsVoltagePhaseCValueStr
Phase C voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.10
acpmsAvgCurrentValueStr
Average current, in amps. This is calculated using the formula (register * CT ratio * 0.001). This could be either the average of the phase currents, or the sum of the phase curre…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.11
acpmsAvgCurrentMinStr
Minimum average current value since last reset, in amps.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.12
acpmsAvgCurrentMaxStr
Maximum average current value since last reset, in amps.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.13
acpmsAvgCurrentAvgStr
Average average current value since last reset, in amps. This is the unit's average of its measurements of the average current reported by the AC power monitor device.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.14
acpmsAvgCurrentInEventState
Event state of this AC power monitor current (Low, Normal, High, etc.).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.15
acpmsCurrentPhaseAValueStr
Phase A current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.16
acpmsCurrentPhaseBValueStr
Phase B current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.17
acpmsCurrentPhaseCValueStr
Phase C current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.18
acpmsAvgFreqValueStr
Frequency, in hertz. On the YD2010, this is calculated using the formula (register * 0.00106813). On the WattsOn, this is calculated using the formula (register * 0.1).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.19
acpmsName
Name for the AC power monitor device.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.2
acpmsAvgFreqMinStr
Minimum frequency value since last reset, in hertz.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.20
acpmsAvgFreqMaxStr
Maximum frequency value since last reset, in hertz.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.21
acpmsAvgFreqAvgStr
Average frequency value since last reset, in hertz. This is the unit's average of its measurements of the average frequency reported by the AC power monitor device.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.22
acpmsAvgFreqInEventState
Event state of this AC power monitor frequency (Low, Normal, High, etc.).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.23
acpmsTRPValueStr
Total real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.24
acpmsTRPMinStr
Minimum total real power value since last reset, in watts.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.25
acpmsTRPMaxStr
Maximum total real power value since last reset, in watts.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.26
acpmsTRPAvgStr
Average total real power value since last reset, in watts. This is the unit's average of its measurements of the average total real power reported by the AC power monitor device.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.27
acpmsTRPInEventState
Event state of this AC power monitor total real power (Low, Normal, High, etc.).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.28
acpmsRPPhaseAValueStr
Phase A real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.29
acpmsAvgVoltageValueStr
Average voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1). This could be either the average of the phase voltages, or the sum of the phase voltag…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.3
acpmsRPPhaseBValueStr
Phase B real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.30
acpmsCombined
Combined status string intended to be parsed by NMS: name`deviceState`deviceStateColorCode`voltage`current`frequency`power~voltageEventState`voltageColorCode`currentEventState`cur…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.32
acpmsTPFValueStr
Total power factor.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.33
acpmsTPFMinStr
Total power factor minimum value since last reset.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.34
acpmsTPFMaxStr
Total power factor maximum value since last reset.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.35
acpmsTPFAvgStr
Total power factor average value since last reset.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.36
acpmsTPFInEventState
Total power factor event state.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.37
acpmsPFPhaseAValueStr
Phase A power factor.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.38
acpmsPFPhaseBValueStr
Phase B power factor.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.39
acpmsAvgVoltageMinStr
Minimum average voltage value since last reset, in volts.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.4
acpmsPFPhaseCValueStr
Phase C power factor.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.40
acpmsTRcPValueStr
Total reactive power, in VAR.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.41
acpmsTRcPMinStr
Total reactive power minimum value since last reset, in VAR.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.42
acpmsTRcPMaxStr
Total reactive power maximum value since last reset, in VAR.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.43
acpmsTRcPAvgStr
Total reactive power average value since last reset, in VAR.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.44
acpmsRcPPhaseAValueStr
Phase A reactive power, in VAR.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.45
acpmsRcPPhaseBValueStr
Phase B reactive power, in VAR.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.46
acpmsRcPPhaseCValueStr
Phase C reactive power, in VAR.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.47
acpmsTAPValueStr
Total apparent power, in VA.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.48
acpmsTAPMinStr
Total apparent power minimum value since last reset, in VA.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.49
acpmsAvgVoltageMaxStr
Maximum average voltage value since last reset, in volts.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.5
acpmsTAPMaxStr
Total apparent power maximum value since last reset, in VA.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.50
acpmsTAPAvgStr
Total apparent power average value since last reset, in VA.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.51
acpmsAPPhaseAValueStr
Phase A apparent power, in VA.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.52
acpmsAPPhaseBValueStr
Phase B apparent power, in VA.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.53
acpmsAPPhaseCValueStr
Phase C apparent power, in VA.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.54
acpmsTotalEnergyWh
Total energy, in Wh.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3052.12.1.8.1.1.55
acpmsTotalEnergyVAR
Total reactive energy, in VAR.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3052.12.1.8.1.1.56
acpmsTotalEnergyVA
Total apparent energy, in VA.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3052.12.1.8.1.1.57
acpmsAvgVoltageAvgStr
Average average voltage value since last reset, in volts. This is the unit's average of its measurements of the average voltage reported by the AC power monitor device.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.6
acpmsAvgVoltageInEventState
Event state of this AC power monitor voltage (Low, Normal, High, etc.).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.7
acpmsVoltagePhaseAValueStr
Phase A voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.8
acpmsVoltagePhaseBValueStr
Phase B voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.12.1.8.1.1.9