esPointInEventState

SITEBOSS-420-STD-MIB · .1.3.6.1.4.1.3052.42.1.1.1.1.5

Object

column r/w SNMPv2-SMIInteger32

A number referring to the event state of a point
on an EventSensor.  This number can have different
meanings depending on the point class.
              
If the point class is temperature, humidity, or
analog input, then the values of this object are:
1=very low
2=low
3=normal
4=high
5=very high
              
For contact closures the values of this object are:
1=point in event state
2=point in normal state
              
For relays the values of this object are:
1=relay energized (active)
2=relay de-energized (inactive)
              
For any point class and any point, if the event
state is undefined, then the value of this object
is 0.
              
For any point class except relay, this object is
read-only.  For relays, setting this object to 1
puts the relay into its active (energized) state.
Setting it to 2 puts the relay into its inactive
(de-energized) state.  Setting it to any
value greater than 2 puts the relay into its
active state for that many seconds (up to 3600),
after which time it puts the relay into its
inactive state.

Context

MIB: SITEBOSS-420-STD-MIB
OID: .1.3.6.1.4.1.3052.42.1.1.1.1.5
Type: column
Access: readwrite
Status: current
Parent: esPointEntry
Table: esPointTable
Siblings: 6

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
esIndexES The part of the point index that refers to an EventSensor. The point index is a string of 3 numbers separated by periods. It contains all the information necessary…	column	Integer32	`.1.3.6.1.4.1.3052.42.1.1.1.1.1`
esIndexPC The part of the point index that refers to point class. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for…	column	Integer32	`.1.3.6.1.4.1.3052.42.1.1.1.1.2`
esIndexPoint The part of the point index that delineates which sensor on the EventSensor. So this combined with esIndexPC (Point Class or type) and esIndexES (which EventSensor)…	column	Integer32	`.1.3.6.1.4.1.3052.42.1.1.1.1.3`
esPointName The name of the point on an EventSensor. For example, 'AC temp' (in the case of the temperature sensor on an EventSensor). There can be multiple points of the same …	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.3052.42.1.1.1.1.4`
esPointValueInt A read-only number referring to the value of a point on an EventSensor. If the point class is temperature, then this object is the temperature in its configured sca…	column	Integer32	`.1.3.6.1.4.1.3052.42.1.1.1.1.6`
esPointValueStr A string referring to the value of a point on an EventSensor. For contact closures this object is either 'Open' or 'Closed'. For relays this object i…	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.3052.42.1.1.1.1.7`