siteV1CfgXMLEventPostingPostToSecOnlyIfPrimFail

SITE-MONITORING-MIB · .1.3.6.1.4.1.12551.20.1.15.3.45
MIB view Table view

Object

scalar r/w SNMPv2-TCDisplayString 
If this parameter is set to true, the events will be sent to secondary only if primary server is not available. If this parameter is set to false, all the events will be sent to primary and secondary server

Context

MIB
SITE-MONITORING-MIB
OID
.1.3.6.1.4.1.12551.20.1.15.3.45
Type
scalar
Access
readwrite
Status
current
Parent
siteV1ConfigList
Siblings
111

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
siteV1CfgNetworkDHCPEnabled
The monitoring will try to get an IP with the DHCP protocol if this parameter is set to True. By default, this parameter is set to False.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.1
siteV1CfgUsersAdministratorLoginPassword
This is the login and the password of the administrator. It is saved with a special syntax. First the login in clear, followed of 2 points, followed by encrypted or hashed passwor…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.101
siteV1CfgUsersUser1LoginPassword
This is the login and the password of the user number 1.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.102
siteV1CfgUsersUser2LoginPassword
This is the login and the password of the user number 2.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.103
siteV1CfgUsersUser3LoginPassword
This is the login and the password of the user number 3.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.104
siteV1CfgUsersUser4LoginPassword
This is the login and the password of the user number 4.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.105
siteV1CfgUsersUser5LoginPassword
This is the login and the password of the user number 5.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.106
siteV1CfgTimeNTPTimeServer
The address or hostname of the server acting as SNTP timer server. If this server is invalid, the time of the monitoring cannot be updated automatically. You can enter several com…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.11
siteV1CfgRadiusAuthenticationServer
Radius Server address. If you have a secondary server, you could use a coma to separate it.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.111
siteV1CfgRadiusAuthenticationPort
Radius Port. If you have a secondary server, you could use a coma to separate it.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.112
siteV1CfgRadiusAuthenticationSecret
Radius PassPhrase
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.113
siteV1CfgEmailEnabled
Enable/Disable the email feature
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.120
siteV1CfgEmailServer
Smtp Server. If you are using a domain name, make sure you configured the network Dns (CF5)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.121
siteV1CfgEmailDomain
Smtp Domain. (Required by some servers.)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.122
siteV1CfgEmailCredentials
Smtp Login and Password. The password is encrypted. To enter a new login and password, enter login:password and validate, the password will be encrypted.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.123
siteV1CfgEmailSender
Mail Sender (The 'From' of the emails you will receive)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.130
siteV1CfgEmailRecipients
Mail Recipients, separated with semicolon ';'
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.131
siteV1CfgEmailMinimalEventSeverityForSending
This is the minimal severity of the event to send a Summary Mail
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.135
siteV1CfgTimeTimeZoneName
The Time Zone of the site
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.14
siteV1CfgControllerFeaturesExtensions
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.140
siteV1CfgControllerRebootAutomaticReboot
Cron rules used in order to restart automatically the controller. Before rebooting configuration, events and data records are saved.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.150
siteV1CfgModbusTcpEnabled
This is a True/False parameter used to activate or deactivate the modbus interface.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.155
siteV1CfgModbusTcpPort
Configure the TCP port for Modbus
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.156
siteV1CfgModbusGlobalWriteEnabled
Allow writing registers
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.157
siteV1CfgIOTMQTTLinkEnabled
Enable Cloud Connection
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.171
siteV1CfgInventoryCANBusBitrate
BitRate for CAN0: most common are 125,250,500,1000
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.190
siteV1CfgNetworkIPAddressIfStatic
The static IP address of the monitoring. This configuration parameter is not used if the DHCP is enabled. The default IP is 192.168.45.2.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.2
siteV1CfgInventoryRS485BusBaudRate
Baudrate for RS485 : 9600,19200,38400,57600,115200,230400,1000000
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.205
siteV1CfgInventoryRS485BusParity
Parity for RS485 : None,Odd,Even,Mark,Space
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.206
siteV1CfgInventoryRS485BusExtensionsConf
The configuration string for RS485 Extensions. For enabling modbus RTU, set MODBUS_RTU_SLAVE. This mode do no allow monitoring and control of other devices.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.210
siteV1CfgWebServerAuthenticationEnabled
This is a True/False parameter used to activate or deactivate the access control to the web server.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.22
siteV1CfgInventoryEthernetExtensionsConf
The configuration string for Ethernet Extensions like the Inview Gateway, a list can be defined with semicolon separator
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.220
siteV1CfgWebServerHttpPort
This is an unsigned integer parameter used to configure the port at which the web server is accessible. By default, the port is 80. If you change this port, you must be sure that …
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.23
siteV1CfgInventoryUSBExtensionsConf
The configuration string for USB Extensions like interface with Victron, a list can be defined with semicolon separator
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.230
siteV1CfgWebServerAuthenticationMethod
The web access security can be managed with 3 authentication methods: Basic Access, Digest Access or Basic with Radius.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.24
siteV1CfgLedLedBehaviour
You can control the behaviour of the led in the front of UCC. With Site Level Only, the led will reflect only the status of the Site without taking in account the state of Sensors…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.240
siteV1CfgWebServerSessionTimeout
The Timeout in minutes for token (Only used by Token Authentication)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.25
siteV1CfgScriptingLuaEnabled
This parameter enable all CompasLua Scripting capabilities. You can control scripts in Files -> Files manager > scripting tab.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.250
siteV1CfgScriptingLuaNumberofErrorsBeforeTriggeringAlarm
Number of errors before triggering the scripting error alarm. When number of error is higher than this parameter, the alarm is triggered. If 0 is set, the alarm is deactivated
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.251
siteV1CfgWebServerHttpsPort
This is a port number to activate or deactivate the https web server - 0 or 443 by default
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.26
siteV1CfgScriptingPythonEnabled
This parameter enable all CompasPython Scripting capabilities. You can control scripts in Files -> Files manager > scripting tab.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.260
siteV1CfgScriptingPythonNumberofErrorsBeforeTriggeringAlarm
Number of errors before triggering the scripting error alarm. When number of error is higher than this parameter, the alarm is triggered. If 0 is set, the alarm is deactivated
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.261
siteV1CfgScriptingPythonEnabledScripts
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.262
siteV1CfgWebServerRedirectHttptoHttps
Redirect the Http request to Https
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.27
siteV1CfgBuzzerEnabled
Enable / Disable Buzzer
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.270
siteV1CfgBuzzerSoundNotificationforMajorAlarms
You can control the behaviour of the Buzzer.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.271
siteV1CfgBuzzerSoundNotificationforMinorAlarms
You can control the behaviour of the Buzzer.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.272
siteV1CfgDisplayGlobalEnabled
Allow to disable the display service
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.279
siteV1CfgWebServerMinimalTLSVersion
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.28
siteV1CfgDisplayCredentialsPinCode
Pin code for actions on display
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.280
siteV1CfgDisplayBacklightLevel
Backlight level between 40 and 100%
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.281
siteV1CfgDisplayBacklightTimeout
Timeout in second, -1 to disable
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.282
siteV1CfgNetworkSubnetMaskIfStatic
The static Subnet Mask of the monitoring. This configuration parameter is not used if the DHCP is enabled. The default mask is 255.255.255.0.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.3
siteV1CfgWebServerDefaultPage
The default page displayed on logon (dashboard, site, summary, alarm_event, ...)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.31
siteV1CfgWebServerLocalizationDatetimeFormat
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.35
siteV1CfgNetworkFirewallAllowICMP
Enable support for Ping and Traceroute
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.350
siteV1CfgNetworkFirewallAllowDebugConnection
Enable Secured Shell
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.351
siteV1CfgNetworkFirewallAllowHttp
Enable Http
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.352
siteV1CfgNetworkFirewallAllowedIpSourcebyMqttBroker
Allows MQTT connections to internal broker (unsecured). Can be used to connect Inview GW, or to test python scripting from a computer. This is an advanced feature
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.353
siteV1CfgWebServerLocalizationTempUnit
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.36
siteV1CfgNetworkWifiActivation
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.390
siteV1CfgNetworkDefaultGatewayIfStatic
The static Default Gateway of the monitoring. This configuration parameter is not used if DHCP is enabled. This is only useful if the monitoring have to use a gateway, this is gen…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.4
siteV1CfgRelK1Mode
Mode of the relay
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.401
siteV1CfgRelK1DefaultState
Relay 1 Normal State
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.402
siteV1CfgRelK2Mode
Mode of the relay
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.406
siteV1CfgRelK2DefaultState
Relay 2 Normal State
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.407
siteV1CfgXMLEventPostingEnabled
This is a True/False parameter used to activate or deactivate the XML event posting.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.41
siteV1CfgXMLEventPostingRefreshPeriod
The minimal time in second between to calculation of the XML events to send. By default, this is done every two seconds.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.42
siteV1CfgXMLEventPostingTimeout
The timeout in millisecond when trying to post XML data to a Web Server.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.43
siteV1CfgXMLEventPostingTablesToPostOnXMLEvent
The list of the tables to send when an event is generated. (description,alarm,data,config,control). This allows to have armada database updated on event.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.46
siteV1CfgNetworkDNSIfStatic
The static DNS of the monitoring. This configuration parameter is used to resolve URI and server name. This is not necessary if you are only IP address as target server. The defau…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.5
siteV1CfgDigInputD1Mode
The mode of the digital input
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.501
siteV1CfgDigInputD1NormallyClosed
Define if normally closed is the default state
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.502
siteV1CfgDigInputD2Mode
The mode of the digital input
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.506
siteV1CfgDigInputD2NormallyClosed
Define if normally closed is the default state
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.507
siteV1CfgXMLHeartbeatPeriod
This is the time between 2 XML Post of heartbeat. If set to 0, no heartbeat.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.51
siteV1CfgNetworkDNS2IfStatic
The secondary static DNS of the monitoring. This configuration parameter is used to resolve URI and server name.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.6
siteV1CfgGenericEventsEventTableLength
The maximum length of the table. The value must be comprised between 10 and 4000
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.601
siteV1CfgSNMPAgentGlobalEnabled
This is a True/False parameter used to activate or deactivate the SNMP agent.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.61
siteV1CfgSNMPAgentGlobalTrapTargetsIP
One or multiple target IP to send traps, coma separated. Ex: 130.145.23.1, 130.23.12.45
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.611
siteV1CfgSNMPAgentTrapsMinimalEventSeverityForSending
This is the minimal severity of the event to send a SNMP trap
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.612
siteV1CfgSNMPAgentGlobalUdpPort
Configure the port for SNMP Agent
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.62
siteV1CfgSNMPAgentGlobalTrapVersion
Traps/Notification can be sent with SNMP V1, V2c or V3 format.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.63
siteV1CfgSNMPAgentGlobalGETMinSecurityLevel
5 choices are available: Not Allowed, No Authentication, V1 Community, V2c Community or V3.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.64
siteV1CfgSNMPAgentGlobalSETMinSecurityLevel
5 choices are available: Not Allowed, No Authentication, V1 Community, V2c Community or V3.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.65
siteV1CfgXMLEventPostingPrimPostURL
This is the first URL at which the events related to this equipment must be posted. The XML ETSI standard is used in the posted data content.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.651
siteV1CfgXMLEventPostingPrimPostLogin
The login which must be used when posting events to the primary server
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.652
siteV1CfgXMLEventPostingPrimPostPassword
The password which must be used when posting events to the primary server
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.653
siteV1CfgSNMPAgentV3AuthenticationAlgorithm
3 choices are available: MD5, SHA, Any
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.66
siteV1CfgXMLEventPostingSecPostURL
This is the second URL at which the events related to this equipment must be posted. The XML ETSI standard is used in the posted data content. This allows having redundancy with t…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.661
siteV1CfgXMLEventPostingSecPostLogin
The login which must be used when posting events to the secondary server
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.662
siteV1CfgXMLEventPostingSecPostPassword
The password which must be used when posting events to the secondary server
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.663
siteV1CfgSNMPAgentV3PrivacyAlgorithm
3 choices are available: DES, AES (128 bits), 3DES
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.67
siteV1CfgSNMPAgentV3PrivacyPassword
The global SNMP V3 Encryption Password (Privacy key). This one is common for all the users to avoid complexity. If not define, privacy is not used. If set, privacy must be defined…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.68
siteV1CfgSNMPAgentV3TrapAuthAlgorithm
2 choices are available: MD5, SHA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.72
siteV1CfgSNMPAgentV3TrapPrivacyAlgorithm
3 choices are available: DES, AES (128 bits), 3DES
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.73
siteV1CfgSNMPAgentV3TrapUsername
The SNMP V3 Trap UserName used for all the SNMP V3 traps
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.74
siteV1CfgSNMPAgentV3TrapAuthPassword
The SNMP V3 Trap Authentication Password
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.75
siteV1CfgSNMPAgentV3TrapPrivacyPassword
The SNMP V3 Trap Privacy Password
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.76
siteV1CfgSNMPAgentGlobalSiteDescriptionIdsIncludedInTraps
List of site Description Elements to send on traps. (to have the site reference and the city in each trap for example). The list is separated with ';'
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.77
siteV1CfgSNMPAgentV1V2cReadCommunity
If read community is defined, it bypass the user management for SNMP V1/V2c
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.79
siteV1CfgGenericEventsGenerateEventOnConfChanges
This is a True/False parameter used to activate or deactivate the tracking of configuration changes
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.81
siteV1CfgDataRecordsAutoArchivePeriodDataRecord
Period in hour to auto save records (when detailed and long duration records are needed). 0 means disabled.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.82
siteV1CfgGenericEventsGenerateEventOnControlExecution
This is a True/False parameter used to activate or deactivate the tracking of control execution
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.83
siteV1CfgGenericEventsGenerateEventOnAlarmAcknowledge
This is a True/False parameter used to activate or deactivate the tracking of alarm acknowledgment
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.84
siteV1CfgPLCGlobalNumberOfCustomData
The number of PLC data. Every equipment can manage up to 30 user programmable data. Data elements are automatically added in the data table. Configuration parameters are added to …
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.901
siteV1CfgPLCGlobalNumberOfCustomAlarm
The number of PLC alarm. Every equipment can manage up to 30 user programmable alarms. Alarm elements are automatically added in the alarm table. The alarm parameters are added to…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.902
siteV1CfgInventoryCANBusCANOpenRequiredNodeIds
This is a coma separated list with the required CAN bus node ids
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.91
siteV1CfgInventoryCANBusCANOpenLSSIdRange
By default 50-80, means up to 50 Can Nodes like rectifiers with CAN Id 50 to 80. To support up to 100 rectifiers, change it to 1-100.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.92
siteV1CfgInventoryCANBusCANOpenSystemDefinition
Used to define new systems with or without ADIO. Example: dc3(30-100) or es1_dc1(es1_inv1,111) to bind an sierra system with ADIO10. A reboot is required after change of value.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.93
siteV1CfgInventoryCANBusCANOpenLSSSavedConf
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.15.3.95