es1DcSys1DataBatTestResult
SITE-MONITORING-MIB ·
.1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.251
Object
scalar
SNMPv2-SMIInteger32
This is about the result of the last battery test. 9 values are possible : NEVER_TESTED, SUCCESS, ON_GOING, FAILED_TIMEOUT, FAILED_VBUS_TOO_LOW, FAILED_LOAD_TOO_LOW, FAILED_AC_FAILURE, FAILED_CANCELED, FAILED_LVD_OPENED
Context
- MIB
- SITE-MONITORING-MIB
- OID
.1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.251- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- es1DcSys1DataList
- Siblings
- 43
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| es1DcSys1DataBatGlobalState NA | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.1 |
| es1DcSys1DataConvertersVoltage The DC bus voltage in volt, given by modules. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.11 |
| es1DcSys1DataBatRegOperatingMode The DC system can have 3 values: 'Float'(0), 'Boost'(1), 'Battery Test'(2) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.16 |
| es1DcSys1DataBatRegPreviousDCOperatingMode The previous value of the DC Mode : 'Float'(0), 'Boost'(1), 'Battery Test'(2) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.17 |
| es1DcSys1DataBatRegTargetVoltage NA | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.18 |
| es1DcSys1DataBatRegMaxChargeCurrent NA | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.19 |
| es1DcSys1DataBatBoostLastStartTrigger The reason why the boost will start when possible | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.202 |
| es1DcSys1DataBatBoostLastStopTrigger The reason why the last boost ended | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.203 |
| es1DcSys1DataBatBoostDuration The duration of the last or ongoing boost. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.205 |
| es1DcSys1DataBatBoostStartTime The datetime of the last battery boost start. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.206 |
| es1DcSys1DataConvertersPower The sum of the delivered dc power | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.21 |
| es1DcSys1DataConvertersCurrent The sum of the delivered dc current | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.22 |
| es1DcSys1DataConvertersInstalledPower Installed power value in watts for dc system | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.23 |
| es1DcSys1DataBatTestDischargedCapacityRatio This is the battery capacity, in percent, discharged during the last battery test. This value is updated at the end of the battery test. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.252 |
| es1DcSys1DataBatTestDischargedCapacity This is the battery capacity, in ampere hour, discharged during the last battery test. This value is updated at the end of the battery test. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.253 |
| es1DcSys1DataBatTestFinalVoltage This is the bus voltage at the end of the last battery test. This value is updated at the end of the battery test. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.254 |
| es1DcSys1DataBatTestDuration The duration of the last battery test. This value is updated at the end of the battery test. This value can't be higher than 1440 minutes (24 hours). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.255 |
| es1DcSys1DataBatTestStartTime The datetime of the last battery test start. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.256 |
| es1DcSys1DataBatTestPreviousResult The result of the previous battery test | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.261 |
| es1DcSys1DataBatTestPreviousDischargedCapacityRatio This is the battery capacity, in percent, discharged during the previous battery test. This value is shifted at the end of the battery test. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.262 |
| es1DcSys1DataBatTestPreviousDischargedCapacity This is the battery capacity, in ampere hour, discharged during the previous battery test. This value is shifted at the end of the battery test. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.263 |
| es1DcSys1DataBatTestPreviousFinalVoltage This is the bus voltage at the end of the previous battery test. This value is shifted at the end of the battery test. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.264 |
| es1DcSys1DataBatTestPreviousDuration The duration of the previous battery test. This value is shifted at the end of the battery test. This value can't be higher than 1440 minutes (24 hours). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.265 |
| es1DcSys1DataBatTestPreviousStartTime The datetime of the previous battery test start. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.266 |
| es1DcSys1DataBatTestNextScheduledBatTest The date and time of the next time the scheduled battery test will run | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.271 |
| es1DcSys1DataBatDisconnectGlobalState Contactor State | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.301 |
| es1DcSys1DataBatDisconnectGlobalReason Reason why LVD is open or having invalid feedback | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.302 |
| es1DcSys1DataBatDisconnectGlobalFeedbackState Contactor Wanted State | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.303 |
| es1DcSys1DataConvertersCountMembers The actual number of member modules in this dc system | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.32 |
| es1DcSys1DataConvertersCountOK The actual number of working modules in this dc system | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.33 |
| es1DcSys1DataLoadGlobalPower Estimation of the load power consumption | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.51 |
| es1DcSys1DataLoadGlobalCurrent Estimation of the load current consumption | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.52 |
| es1DcSys1DataBatMeasurementsVoltage Measurement of the battery voltage | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.60 |
| es1DcSys1DataBatMeasurementsInputCurrent The current flowing to battery | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.61 |
| es1DcSys1DataBatMeasurementsInputPower The power flowing to battery | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.62 |
| es1DcSys1DataBatMeasurementsTemp Measurement of the battery voltage | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.71 |
| es1DcSys1DataBatEstimatesResistance Estimation of Battery Resistance | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.81 |
| es1DcSys1DataBatCapacityNominal NA | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.90 |
| es1DcSys1DataBatAutonomyStateOfCharge The battery charge capacity, calculated by integration of the current, or coming from BMS. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.91 |
| es1DcSys1DataBatAutonomyCalculatedAutonomy Calculation of the remaining autonomy. This value can change following the load of your system and the maximal depth of discharge configuration (CF39). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.92 |
| es1DcSys1DataBatCapacityRemaining NA | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.93 |
| es1DcSys1DataBatAutonomyBatCurrentIntegration Actual value of the integration of the current, in Ampere * hour | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.94 |
| es1DcSys1DataBatCapacityStateOfHealth NA | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12551.20.1.20.1.20.1.13.3.95 |