boardIndex
SHELF-MIB ·
.1.3.6.1.4.1.1038.150.20.2.1.1
Object
column
Integer32
A unique value which identify a particular slot. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to hardware. Each equipment maintain its own pool of values: ex ADR155c : A = 1, B = 2, ... M = 5, Fan = 6 ex ADR2500c: Fan = 1, PSU1 = 2, ...Trib1 = 8, Trib6= 13, Line1 = 14,... Switch2 = 17, Shelf = 18
Context
- MIB
- SHELF-MIB
- OID
.1.3.6.1.4.1.1038.150.20.2.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- boardEntry
- Table
- boardTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| boardMonitor When the value of this field is set to false, the failure detection
is stopped for this board. | column | EQUIPMENT-MIBSagemBoolean | .1.3.6.1.4.1.1038.150.20.2.1.10 |
| boardFailure Active failures on board | column | BoardFailure | .1.3.6.1.4.1.1038.150.20.2.1.11 |
| boardSeverity A reference to failure severity for boards. | column | EQUIPMENT-MIBSeverity | .1.3.6.1.4.1.1038.150.20.2.1.12 |
| boardMissingSev A reference to failure severity for boards. | column | EQUIPMENT-MIBSeverity | .1.3.6.1.4.1.1038.150.20.2.1.13 |
| boardMismatchSev A reference to failure severity for boards. | column | EQUIPMENT-MIBSeverity | .1.3.6.1.4.1.1038.150.20.2.1.14 |
| boardDefectiveSev A reference to failure severity for boards. | column | EQUIPMENT-MIBSeverity | .1.3.6.1.4.1.1038.150.20.2.1.15 |
| boardSlotName A DisplayString which identify the name of a particular slot.
Its value is fixed at equipment design time.
It is usualy related to hardware
ex ADR155c : A, B, ... Fan
ex ADR2500c… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1038.150.20.2.1.2 |
| boardExpectType A value which configure the expected type. If used, this one must be
equal to one of existent boardListIndex for the considerated board. Otherwise,
the value is set to 0.
Known… | column | Integer32 | .1.3.6.1.4.1.1038.150.20.2.1.3 |
| boardInsertType When the inserted board doesn't match with the expexted board
the boardMismatch failure is generated.
The type of the card could be found in hardware inventory. | column | Integer32 | .1.3.6.1.4.1.1038.150.20.2.1.4 |
| boardExpectFamily Board Family corresponding to the specified expected kind. This value is send by the equipment.
ex ADR155c :
ex ADR2500c : CTRL, FAN, AUX, CCU, PSU, STM1 OPT, STM1 ERE, STM4 OPT… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1038.150.20.2.1.5 |
| boardInsertFamily Board Family corresponding to the type of inserted board.
ex ADR155c :
ex ADR2500c : CTRL, FAN, AUX, CCU, PSU, STM1 OPT, STM1 ERE, STM4 OPT, STM16 OPT, GBETH, SWITCH | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1038.150.20.2.1.6 |
| boardActive When the value of this field is set to false, the transmission of
this board stop and the board could properly be extracted | column | EQUIPMENT-MIBSagemBoolean | .1.3.6.1.4.1.1038.150.20.2.1.7 |
| boardFirstPortIndex If the card is a card with physical ports, then the value is
the first index of a physical interface (SPI, PPI) in the mib
SDH-ETS. Else, the value is 0. | column | Integer32 | .1.3.6.1.4.1.1038.150.20.2.1.8 |
| boardProtectionType The value of this field indicates the kind of wanted card protection.
The default value is NONE.
if value is changed in cardP(1)then an entry is created in cardpTable. But this ta… | column | ProtectionType | .1.3.6.1.4.1.1038.150.20.2.1.9 |