entNDataRate
SENAO-ENTERPRISE-INDOOR-AP-CB-MIB ·
.1.3.6.1.4.1.14125.100.5.1.8
Object
scalar
r/w
Integer32
This attribute specifies the 11n data rate
Context
- MIB
- SENAO-ENTERPRISE-INDOOR-AP-CB-MIB
- OID
.1.3.6.1.4.1.14125.100.5.1.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- entWlanCommonInfo
- Siblings
- 15
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| entOpMode Set op mode: 0(AP), 1(Client bridge), 2(WDS bridge), 3(Repeater) | scalar | Enumeration | .1.3.6.1.4.1.14125.100.5.1.1 |
| entBeaconInterval This attribute specifies the number of TU that a station shall use
for scheduling Beacon transmissions | scalar | Integer32 | .1.3.6.1.4.1.14125.100.5.1.10 |
| entDTIMPeriod This attribute specifies the number of beacon intervals | scalar | Integer32 | .1.3.6.1.4.1.14125.100.5.1.11 |
| entFragmentationThreshold This attribute shall specify the current maximum size, in octets,
of the MPDU that may be delivered to the PHY | scalar | Integer32 | .1.3.6.1.4.1.14125.100.5.1.12 |
| entRTSThreshold This attribute shall indicate the number of octets in an MPDU,
below which an RTS/CTS handshake shall not be performed. | scalar | Integer32 | .1.3.6.1.4.1.14125.100.5.1.13 |
| entChannelBandwidth This attribute specifies the channel bandwidth: 0(Auto 20/40 MHZ), 1(20 MHZ) | scalar | Integer32 | .1.3.6.1.4.1.14125.100.5.1.14 |
| entPreambleType This attribute specifies the preamble type: 1(Short), 2(Long) | scalar | Enumeration | .1.3.6.1.4.1.14125.100.5.1.15 |
| entCTSProtection This attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None) | scalar | Enumeration | .1.3.6.1.4.1.14125.100.5.1.16 |
| entRadio Set this attribute TRUE will enable the radio | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14125.100.5.1.2 |
| entAPMode Only when op mode is 0(AP), we can set AP mode: 0(AP), 1(WDS) | scalar | Enumeration | .1.3.6.1.4.1.14125.100.5.1.3 |
| entBand The wireless mode: 0(802.11 b/g),
1(802.11 b),
2(802.11 a),
4(802.11 g),
6(802.11 n),
7(802.11 g/n),
8(802.11 a/n),
9(802.11 b/g/n) | scalar | Enumeration | .1.3.6.1.4.1.14125.100.5.1.4 |
| entESSIDNum Set the Number of multiple ESSID | scalar | Integer32 | .1.3.6.1.4.1.14125.100.5.1.5 |
| entChannel The current operating frequency channel | scalar | Integer32 | .1.3.6.1.4.1.14125.100.5.1.6 |
| entDataRate This attribute specifies the data rate at which the station may transmit data in Mbps
0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), 12(12Mbps),
18(18Mb… | scalar | Enumeration | .1.3.6.1.4.1.14125.100.5.1.7 |
| entTxPower The transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%) | scalar | Integer32 | .1.3.6.1.4.1.14125.100.5.1.9 |