hmtsRevReturnLvl
SCTE-HMS-HMTS-MIB ·
.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.10
Object
This is the return level as recorded on the last response received on this receiver. This value only applies to the RF port types; all other port types should return noSuchName Error. If the port has not received a response and therefore has not recorded a reverse return level then this objects shall return -999. When the return level falls outside acceptable limits, as indicated by the properties of this value, the offending units hmtsDevComStat shall indicate a bad return level. This value is a placeholder to globally affect the properties that really apply to the return level value in the hmtsDevTable. In all cases the HMTS shall set hmtsDevReturnLvl for the device to this as received level upon receiving a valid massage. The property thresholds and enable when set using this object shall be used for all hmtsDevReturnLvl in the device table using this receiver. This object never reports an alarm, hmtsDevReturnLvl does when the thresholds of this object are tripped. Use hmtsDevReturnLvl threshold properties to affect a property change for an individual device. This object has a threshold property in the propertyTable as defined in SCTE 38-1 (formerly HMS026)
Context
- MIB
- SCTE-HMS-HMTS-MIB
- OID
.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.10- Type
- column
- Access
- readonly
- Status
- current
- Units
- 0.1 dBmV
- Parent
- hmtsRevPortEntry
- Table
- hmtsRevPortTable
- Siblings
- 16
Syntax
0.1 dBmV SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmtsRevPortId This is a unique string identifying the reverse path port.
This value is vendor specific and should physically identify
the port. | column | OctetString | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.1 |
| hmtsRevCRCErrors This object maintains the number of packets received that have
a bit error and do not pass CRC check. This count is maintained
until the HMTS is reset or this count is reset. Wr… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.11 |
| hmtsRevFrameErrors This object maintains the number of packets received that have
a framing error. This count is maintained until the HMTS is
reset or this count is reset. Writing to this object w… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.12 |
| hmtsRevBackOffPeriod This is the backoff period as described in the
commonBackoffPeriod object in the SCTE 38-3
(formerly HMS024) SCTE-HMS-COMMON-MIB.
This value is used by the HMTS to
preset and main… | column | 1 ms Integer32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.13 |
| hmtsRevACKTimeout This is the acknowledge timeout as described in the
commonACKTimeoutWindow object in the SCTE 38-3
(formerly HMS024) SCTE-HMS-COMMON-MIB.
This value is used by the HMTS to
preset … | column | 1 ms Integer32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.14 |
| hmtsRevMaxMACRetries This is the maximum retries as described in the
commonMaximumMACLayerRetries object in the SCTE 38-3
(formerly HMS024) SCTE-HMS-COMMON-MIB.
This value is used by the HMTS to
prese… | column | Integer32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.15 |
| hmtsRevBackOffMinExp This is the minimum exponent as described in the
commonBackoffMinimumExponent object in the SCTE 38-3
(formerly HMS024) SCTE-HMS-COMMON-MIB.
This value is used by the HMTS to
pres… | column | Integer32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.16 |
| hmtsRevBackOffMaxExp This is the maximum exponent as described in the
commonBackoffMaximumExponent object in the SCTE 38-3
(formerly HMS024) SCTE-HMS-COMMON-MIB.
This value is used by the HMTS to
pres… | column | Integer32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.17 |
| hmtsRevFwdPortId This is the unique identifier of the forward port table.
This ties this reverse port to the commanding forward port.
This shall be a valid index in the hmtsFwdPortTable. Setting
… | column | OctetString | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.2 |
| hmtsRevPortDescr This is a string of text describing the function of the port
and physical location. Such as 'HMS RF Receiver - Slot 3'.
This value is vendor specific. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.3 |
| hmtsRevPortType Serial communication type:
rf - This HMTS port uses an RF modem for reverse communication.
rs485 - This HMTS port uses an RS-485 for reverse communication.
rs232 - This HMTS po… | column | Enumeration | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.4 |
| hmtsRevPortAdminState This allows the operator to disable/enable the processing of
data received on this port. When disabled no reverse path
messages shall be received from this port.
This object is n… | column | Enumeration | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.5 |
| hmtsRevPortOperState This reports the operational status of the port.
This object has a threshold property in the discreteProperty as
describe in SCTE 38-1 (formerly HMS026). | column | Enumeration | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.6 |
| hmtsRevFrequency This is the return path frequency of both the HMTS' reverse
path modem and the network element's reverse path transmitter.
This value only applies to the RF port type; all
other p… | column | 1 Hz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.7 |
| hmtsRevMuteLvl This level controls the automatic receiver Mute. Power below
this level will not be converted into a digital data. This
field only applies to the RF port type; all others port t… | column | 0.1 dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.8 |
| hmtsRevMulticastAddr This is the Multicast address associated with all devices on
this receiver. When a device first registers with HMTS, this
value is set as one of the devices multicast addresses. … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.9 |