hmtsFwdXpndrFrequency
SCTE-HMS-HMTS-MIB ·
.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.7
Object
This is the frequency being sent in the payload of the CHNLDESC
PDU. This variable only applies to RF ports, other port types
should return noSuchName. When this variable is changed, several
successive CHNLDESC PDU's should be broadcast by the HMTS.
For more information, see also the description of
hmtsFwdHmtsFrequency.
RESOLUTION: <=100 Hz
This object is non-volatile.
Context
- MIB
- SCTE-HMS-HMTS-MIB
- OID
.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 1 Hz
- Parent
- hmtsFwdPortEntry
- Table
- hmtsFwdPortTable
- Siblings
- 9
Syntax
1 Hz SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmtsFwdPortId This is a unique string identifying the forward port. This
value is vendor specific and should physically identify the
port. | column | OctetString | .1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.1 |
| hmtsFwdPollTime The HMTS is required to poll the devices on the network. This is
the maximum amount of time the HMTS will allow to pass before
automatically attempting communication to see if th… | column | 1 s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.10 |
| hmtsFwdPortDescr This is a string of text describing the function of the port
and physical location. Such as 'HMS RF transmitter - Slot 1'.
This value is vendor specific. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.2 |
| hmtsFwdPortType Serial communication type:
rf - This HMTS port uses an RF modem for forward communication.
rs485 - This HMTS port uses an RS-485 for forward communication.
rs232 - This HMTS po… | column | Enumeration | .1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.3 |
| hmtsFwdPortAdminState This allows the operator to disable/enable the processing of
data sent on this port. When disabled no forward path
messages shall be sent out this port. If the termination
syste… | column | Enumeration | .1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.4 |
| hmtsFwdPortOperState This reports the operational status of the port.
This object has a threshold property in the discretePropertyTable as
defined in SCTE 38-1 (formerly HMS026) | column | Enumeration | .1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.5 |
| hmtsFwdHmtsFrequency This is the frequency at which an HMTS transmits its FSK signal
on the HFC network, and only applies to RF ports. Other port
types should return noSuchName upon SNMP get or set co… | column | 1 Hz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.6 |
| hmtsFwdProvPwrLvl This is the power level of the forward port transmitter modem.
This value only applies to the RF port type; all other port
types should return noSuchName. Any attempt to write to… | column | 0.1 dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.8 |
| hmtsFwdMaxPwrLvl This is the maximum power level of the forward port transmitter modem.
This value only applies to the RF port type; all other port types
should return noSuchName. Any attempt to … | column | 0.1 dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.9 |