scsiAuthIntrLunMapIndex
SCSI-MIB ·
.1.3.6.1.2.1.139.2.3.3.1.1.5
Object
column
r/w
ScsiIndexValueOrZero
This object identifies the set of entries in the
scsiLunMapTable for which scsiLunMapIndex has the same value as
the value of this object. The identified set of entries
constitutes the LUN map to be used for accessing logical units
when the remote SCSI initiator port or device corresponding to
this entry is attached to any local SCSI target port or device
corresponding to this entry.
Note that this object has a value of zero if this entry should
use the default LUN map.
Context
- MIB
- SCSI-MIB
- OID
.1.3.6.1.2.1.139.2.3.3.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- scsiAuthorizedIntrEntry
- Table
- scsiAuthorizedIntrTable
- Siblings
- 11
Syntax
ScsiIndexValueOrZero
- Source
- ScsiIndexValueOrZero
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| scsiAuthIntrTgtPortIndex This object contains either the index of the port or zero, to
indicate any port, on the particular local SCSI target device. | column | ScsiPortIndexValueOrZero | .1.3.6.1.2.1.139.2.3.3.1.1.1 |
| scsiAuthIntrHSOutCommands This object represents the number of commands sent by the
remote SCSI initiator device or port corresponding to this
entry to the local SCSI target device or port corresponding to… | column | commands SNMPv2-SMICounter64 | .1.3.6.1.2.1.139.2.3.3.1.1.10 |
| scsiAuthIntrLastCreation This object indicates the value of sysUpTime when this row was
last created. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.139.2.3.3.1.1.11 |
| scsiAuthIntrRowStatus This object allows an administrator to create or delete this
entry.
A newly created row cannot be made active until a value has
been set for scsiAuthIntrName. In this case, the v… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.139.2.3.3.1.1.12 |
| scsiAuthIntrIndex This object is an arbitrary integer used to uniquely identify
a SCSI initiator device or port that is authorized to attach
to a particular local SCSI target device or port of a pa… | column | ScsiIndexValue | .1.3.6.1.2.1.139.2.3.3.1.1.2 |
| scsiAuthIntrDevOrPort This object specifies whether this entry refers to a remote
SCSI initiator port or to a SCSI initiator device.
A value of device(1) means that the authorized remote initiator
is a… | column | ScsiDeviceOrPort | .1.3.6.1.2.1.139.2.3.3.1.1.3 |
| scsiAuthIntrName This object represents the name of the remote SCSI initiator
device or port authorized by this row. | column | ScsiName | .1.3.6.1.2.1.139.2.3.3.1.1.4 |
| scsiAuthIntrAttachedTimes This object indicates the number of times that this remote
SCSI initiator device or port has transitioned from unattached
to attached to this local SCSI target device or port.
Dis… | column | Times SNMPv2-SMICounter32 | .1.3.6.1.2.1.139.2.3.3.1.1.6 |
| scsiAuthIntrOutCommands This object indicates the number of commands that the remote
SCSI initiator device or port corresponding to this entry has
sent to the local SCSI target device or port correspondi… | column | commands SNMPv2-SMICounter32 | .1.3.6.1.2.1.139.2.3.3.1.1.7 |
| scsiAuthIntrReadMegaBytes This object indicates the amount of data in megabytes that
the remote SCSI initiator device or port corresponding to this
entry has read from the local SCSI target device or port
… | column | Megabytes SNMPv2-SMICounter32 | .1.3.6.1.2.1.139.2.3.3.1.1.8 |
| scsiAuthIntrWrittenMegaBytes This object indicates the amount of data in megabytes that the
remote SCSI initiator device or port corresponding to this
entry has written to the local SCSI target device or port… | column | Megabytes SNMPv2-SMICounter32 | .1.3.6.1.2.1.139.2.3.3.1.1.9 |