saCmMtaProvisioningMode

SA-CM-MTA-MIB · .1.3.6.1.4.1.1429.78.1.7

Object

scalar Enumeration

This object must only be set via the CM configuration
file during the provisioning process.
After CM is operational, this object can not be set
via SNMP.
MTA provisioning modes:
0: MTA follows the PacketCable provisioning specifications
   and supports BASIC, HYBRID and SECURE flows.
1: MTA will provision using only the CM config file. VoIP
   parameters MUST be included in the CM config file as
   VSIFs. This option will become obsolete.
2: MTA will learn the MTA config file name and location
   from the MTA DHCP OFFER.
   If the filename or location is missing, MTA will switch
   to mode 3.
3: MTA will learn the MTA config file name and location via
   SNMP.  The MTA will send an SNMP inform to the
   provisioning server specified in DHCP option 122.3 or
   177.3, depending on saCmMtaDhcpPktcOption (note: MTA
   will not provision if saCmMtaDhcpPktcOption = requireNone(1)
   and no option 122.3 or 177.3 is specified).
4: MTA will learn the MTA config file name and location and
   the MTA host name from the MTA DHCP OFFER/ACK.
   If the filename is missing in the DHCP OFFER/ACK, the MTA
   will request a config file name based on the MTA mac
   address (example: 000f21c4e145.bin).
   If the MTA host name is missing in the DHCP OFFER/ACK the
   MTA will use a host name of MAC_ADDR (example: 000f21c4e145).
5: MTA will request a config file name based on the MTA mac
   address (example: 000f21c4e145.bin).  
   MTA will learn the MTA config file location via DHCP.  
   MTA will use a host name of MAC_ADDR (example: 000f21c4e145).  
   MTA will NOT use the file name and host name in the
   DHCP ACK even if the parameters are present.
6: Web page provisioning. Parameters from a web page will be used
   rather than from config file. All the web page parameters are
   stored in non-vol. Base provisioning method is 2 above.
For modes other than 0, MTA DHCP options 122, 177 are not required.
Note:  This object can be set via the CM configuration file ONLY.

Context

MIB: SA-CM-MTA-MIB
OID: .1.3.6.1.4.1.1429.78.1.7
Type: scalar
Access: readonly
Status: current
Parent: saCmMta
Siblings: 9

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	packetCable
`1`	oneConfigFile
`2`	twoConfigFilesDHCP
`3`	twoConfigFilesSNMP
`4`	twoConfigFilesDHCPmacAddress
`5`	twoConfigFilesMacAddressOnly
`6`	webPage

Related Objects

Sibling Objects

Object	Type	Syntax	OID
saCmMtaDevice Control embedded MTA. If disable(0), MTA will not send out DHCP DISCOVER message. If DHCP option 122.1 is missing, MTA is disabled and MIB is set to disable(0). Note: Equivalent…	scalar	Enumeration	`.1.3.6.1.4.1.1429.78.1.1`
saCmMtaRequireTod This object controls if the EMTA will continue the provisioning process if a response from a Time of Day server is not available at provisioning step CM-8. If set to true(1) the E…	scalar	Enumeration	`.1.3.6.1.4.1.1429.78.1.10`
saCmMtaCliAccess	node	-	`.1.3.6.1.4.1.1429.78.1.1001`
saCmMtaSwUpgradeControlTimer This object is used to control the conditions for rebooting the modem following a software download: 0: Docsis Default: Always download software and reboot immediately after so…	scalar	seconds Integer32	`.1.3.6.1.4.1.1429.78.1.14`
saCmMtaDhcpOptionSixty Defines the string value for SIP EMTA DHCP DISCOVER option 60 text. This mib is only writeable in the the CM config file. Default option 60 value is pktc1.0	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.1429.78.1.20`
saCmMtaProvSnmpSetCommunityString The value set in this object becomes the SNMPv2c community string that will be accepted in the SNMPSET sent from the provisioning server during MTA registration. Provisioning meth…	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.1429.78.1.26`
saCmMtaIpFilters DOCSIS config file filters (from RFC2669) are normally applied to the MTA and all CPE interfaces per the eDOCSIS spec. This MIB controls if the filters are applied to the MTA. 0:…	scalar	Enumeration	`.1.3.6.1.4.1.1429.78.1.3`
saCmMtaSidCount Number of SIDs the MTA supports.	scalar	Integer32	`.1.3.6.1.4.1.1429.78.1.5`
saCmMtaDhcpPktcOption This object must only be set via the CM configuration file during the provisioning process. After CM is operational, this object can not be set via SNMP. 0: CM and MTA will accept…	scalar	Enumeration	`.1.3.6.1.4.1.1429.78.1.8`