saCmMtaDhcpPktcOption
SA-CM-MTA-MIB ·
.1.3.6.1.4.1.1429.78.1.8
Object
scalar
Enumeration
This object must only be set via the CM configuration file during the provisioning process. After CM is operational, this object can not be set via SNMP. 0: CM and MTA will accept only PacketCable option 122. If option 122 is not included in CM DHCP OFFER, MTA will not start. 1: CM and MTA will accept 122 or 177 or none. If DHCP OFFER contains 122 or 177, MTA will process it. 2: CM and MTA will accept only PacketCable option 177. If option 177 is not included in CM DHCP OFFER, MTA will not start. This MIB is saved into modem's non-vol memory and the new value is active after the modem registers and reboots again (DHCP comes before config file parsing). Note: Equivalent of VSIF 64 Note: This object can be set via the CM configuration file ONLY.
Context
- MIB
- SA-CM-MTA-MIB
- OID
.1.3.6.1.4.1.1429.78.1.8- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- saCmMta
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | require122 |
1 | requireNone |
2 | require177 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| saCmMtaDevice Control embedded MTA.
If disable(0), MTA will not send out DHCP DISCOVER message.
If DHCP option 122.1 is missing, MTA is disabled and MIB is set to disable(0).
Note: Equivalent… | scalar | Enumeration | .1.3.6.1.4.1.1429.78.1.1 |
| saCmMtaRequireTod This object controls if the EMTA will continue the provisioning
process if a response from a Time of Day server is not available
at provisioning step CM-8. If set to true(1) the E… | scalar | Enumeration | .1.3.6.1.4.1.1429.78.1.10 |
| saCmMtaCliAccess | node | - | .1.3.6.1.4.1.1429.78.1.1001 |
| saCmMtaSwUpgradeControlTimer This object is used to control the conditions for rebooting
the modem following a software download:
0: Docsis Default: Always download software and reboot
immediately after so… | scalar | seconds Integer32 | .1.3.6.1.4.1.1429.78.1.14 |
| saCmMtaDhcpOptionSixty Defines the string value for SIP EMTA DHCP DISCOVER option 60 text.
This mib is only writeable in the the CM config file. Default option
60 value is pktc1.0 | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.1429.78.1.20 |
| saCmMtaProvSnmpSetCommunityString The value set in this object becomes the SNMPv2c community string that will be accepted
in the SNMPSET sent from the provisioning server during MTA registration.
Provisioning meth… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.1429.78.1.26 |
| saCmMtaIpFilters DOCSIS config file filters (from RFC2669) are normally applied to the MTA and all
CPE interfaces per the eDOCSIS spec. This MIB controls if the filters are applied
to the MTA.
0:… | scalar | Enumeration | .1.3.6.1.4.1.1429.78.1.3 |
| saCmMtaSidCount Number of SIDs the MTA supports. | scalar | Integer32 | .1.3.6.1.4.1.1429.78.1.5 |
| saCmMtaProvisioningMode This object must only be set via the CM configuration
file during the provisioning process.
After CM is operational, this object can not be set
via SNMP.
MTA provisioning modes:
0… | scalar | Enumeration | .1.3.6.1.4.1.1429.78.1.7 |