s5ChasComRelPos
S5-CHASSIS-MIB ·
.1.3.6.1.4.1.45.1.6.3.3.1.1.13
Object
column
Integer32
This object describes the position of
each component in the unit group relative
to each other. Components in the unit group
are numbered in the ascending order with the
uppermost component being numbered one. The
value of this object should never be greater
than the value of s5ChasGrpMaxEnts. If not
available, a value of zero will be returned.
Note: This object is only implemented in
agents that support 'virtual' chassis.
Context
- MIB
- S5-CHASSIS-MIB
- OID
.1.3.6.1.4.1.45.1.6.3.3.1.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- s5ChasComEntry
- Table
- s5ChasComTable
- Siblings
- 29
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-32767
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| s5ChasComGrpIndx The index of the chassis level group which
contains this component. | column | Integer32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.1 |
| s5ChasComOperState The current operational state of the
component. The possible values are:
other(1).........some other state
notAvail(2)......state not available
removed(3).......component re… | column | Enumeration | .1.3.6.1.4.1.45.1.6.3.3.1.1.10 |
| s5ChasComMaxSubs The potential number of sub-components
that can be attached to the component.
A value of zero means none. A value of -1
indicates that no component information is
available. The a… | column | Integer32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.11 |
| s5ChasComNumSubs The actual number of sub-components that
are attached to the component. A value of
zero means none. A value of -1 indicates
that no component information is available.
The potenti… | column | Integer32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.12 |
| s5ChasComLocation This object provides geographic location
information of a component in a system
modeled as a chassis, but possibly physically
implemented with geographically separate devices
conn… | column | OctetString | .1.3.6.1.4.1.45.1.6.3.3.1.1.14 |
| s5ChasComGroupMap This object describes the group mapping of
each component in the chassis. For the
components in the unit group, the value of this
object should be the backplane number to which t… | column | Integer32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.15 |
| s5ChasComBaseNumPorts This object indicates the number of ports (of any type)
contained in a component, not including any sub-components
contained within the component. | column | Integer32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.16 |
| s5ChasComTotalNumPorts This object indicates the total number of ports (of
any type) contained in a component, including any ports
contained in sub-components contained within the component. | column | Integer32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.17 |
| s5ChasComIpAddress The IP address of a component. For components that do not
have an IP address/stack, this value should always be 0.0.0.0.
Note that for a stackable system in stack mode, this will… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.1.6.3.3.1.1.18 |
| s5ChasComRunningSoftwareVer The version number of the software image running on this
component/sub-component.
If not available, the value is a zero length
string. | column | OctetString | .1.3.6.1.4.1.45.1.6.3.3.1.1.19 |
| s5ChasComIndx The index of the component in the group.
For example, for modules in the 'board'
group, this is the slot number. | column | Integer32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.2 |
| s5ChasComIpv6Address The IPv6 address of a component. For components that do not
have an IPv6 address/stack, this value should always be 0::0.
Note that for a stackable system in stack mode, this wil… | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.45.1.6.3.3.1.1.20 |
| s5ChasComIpv6NetMask The IPv6 netmask of a component. For components that do not
have an IPv6 address/stack, this value should always be 0::0.
Note that for a stackable system in stack mode, this wil… | column | IPV6-TCIpv6AddressPrefix | .1.3.6.1.4.1.45.1.6.3.3.1.1.21 |
| s5ChasComIpMgmtAddress The IP address associated with the physical dedicated
management port (out of band management port) of a component. For
components that do not have an IP address/stack associated … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.1.6.3.3.1.1.22 |
| s5ChasComIpMgmtNetMask The IP netmask associated with the physical dedicated
management port (out of band management port) of a component. For
components that do not have an IP address/stack associated … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.1.6.3.3.1.1.23 |
| s5ChasComIpMgmtGateway The IP address of the default gateway associated with the
physical dedicated management port (out of band management port)
of a component. For components that do not have an IP ad… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.1.6.3.3.1.1.24 |
| s5ChasComIpv6MgmtAddress The IPv6 address associated with the physical dedicated
management port (out of band management port) of a component.
Note that for a stackable system in stack mode, this IP … | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.45.1.6.3.3.1.1.25 |
| s5ChasComIpv6MgmtNetMask The IPv6 netmask associated with the physical dedicated
management port (out of band management port) of a component.
Note that for a stackable system in stack mode, this netmask… | column | IPV6-TCIpv6AddressPrefix | .1.3.6.1.4.1.45.1.6.3.3.1.1.26 |
| s5ChasComIpMgmtLimit This object indicates the in-bound packet threshold rate
for the management port (out of band management port). | column | packets per second Integer32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.27 |
| s5ChasComIpMgmtTimeout This object indicates the port shutdown period
for the management port (out of band management port). | column | seconds Integer32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.28 |
| s5ChasComIpMgmtShutdown This object is used to control whether the out of band management
port is up or down (false for port up and true for port down). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.1.6.3.3.1.1.29 |
| s5ChasComSubIndx If this table entry (i.e. table row)
describes a component, then the value is
zero. Otherwise, this table entry describes
a sub-component and this is the index of
the sub-componen… | column | Integer32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.3 |
| s5ChasComUpTime The time (in hundredths of a second)
since the unit was initialized. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.45.1.6.3.3.1.1.30 |
| s5ChasComType The type of component/sub-component. The
values are defined under s5ChasComTypeVal
in the Registration MIB. | column | ObjectIdentifier | .1.3.6.1.4.1.45.1.6.3.3.1.1.4 |
| s5ChasComDescr A description of the component/sub-component.
If not available, the value is a zero length
string. | column | OctetString | .1.3.6.1.4.1.45.1.6.3.3.1.1.5 |
| s5ChasComVer The version number of the component/sub-component.
If not available, the value is a zero length
string. | column | OctetString | .1.3.6.1.4.1.45.1.6.3.3.1.1.6 |
| s5ChasComSerNum The serial number of the component/sub-component.
If not available, the value is a zero length
string. | column | OctetString | .1.3.6.1.4.1.45.1.6.3.3.1.1.7 |
| s5ChasComLstChng The value of sysUpTime when it was
detected that the component/sub-component
was added to the chassis. If this has not
occurred since the cold/warm start of the
agent, then the va… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.45.1.6.3.3.1.1.8 |
| s5ChasComAdminState The desired state of the component/sub-component.
The values that are read-only are:
other(1)......currently in some other state
notAvail(2)...actual value is not available
… | column | Enumeration | .1.3.6.1.4.1.45.1.6.3.3.1.1.9 |