ruckusZDAPConfigRadioTxPowerLevel24
RUCKUS-ZD-AP-MIB ·
.1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.32
Object
column
r/w
dB Integer32
The AP Tx Power level selection on the 2.4 GHz radio, auto(25) | 0 to 24 corresponding to 0 to -24dB from max power. Now to be compatible with web, if txpower is more than 10, txpower will be set to 24(Min).
Context
- MIB
- RUCKUS-ZD-AP-MIB
- OID
.1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.32- Type
- column
- Access
- readwrite
- Status
- current
- Units
- dB
- Parent
- ruckusZDAPConfigEntry
- Table
- ruckusZDAPConfigTable
- Siblings
- 34
Syntax
dB Integer32
Values & Constraints
Object Constraints
range: 0-25
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ruckusZDAPConfigID AP ID.Max value:for zd1000,50;for zd1100,100;for zd3000,500;zd5000,1000 | column | Integer32 | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.1 |
| ruckusZDAPConfigGpsLatitude The AP GPS location measured. the range is '-90,90'. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.10 |
| ruckusZDAPConfigGpsLongitude The AP GPS location measured. the range is '-180,180'. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.11 |
| ruckusZDAPConfigIPVersion The AP IP version | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.14 |
| ruckusZDAPConfigIpAddressSettingMode The AP IP address configuration setting control.
admin-by-zd: ap ipv4 address is set in static model by zd;
admin-by-dhcp: ap ipv4 address is set in dhcp model by zd;
admin-by-ap:… | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.15 |
| ruckusZDAPConfigIpAddress The AP IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.16 |
| ruckusZDAPConfigIpAddressMask The AP IP address mask. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.17 |
| ruckusZDAPConfigMacAddress AP MAC Address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.2 |
| ruckusZDAPConfigGatewayIpAddress The AP Gateway IP Address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.20 |
| ruckusZDAPConfigIpV6AddressSettingMode The AP IPV6 address configuration setting control.
admin-by-zd: ap ipv6 address is set in manual model by zd;
admin-by-autoconfig: ap ipv6 address is set in autoconfig(from route … | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.21 |
| ruckusZDAPConfigIpV6Address The AP IPV6 address. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.22 |
| ruckusZDAPConfigIpV6PrefixLen The AP IPV6 prefix length. | column | Integer32 | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.23 |
| ruckusZDAPConfigGatewayIpV6Address The AP Gateway IPV6 Address. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.24 |
| ruckusZDAPConfigPrimaryDnsIpAddress The AP Primary DNS IP Address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.25 |
| ruckusZDAPConfigSecondaryDnsIpAddress The AP Secondary DNS IP Address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.26 |
| ruckusZDAPConfigPrimaryDnsIpV6Address The AP Primary DNS IPV6 Address. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.27 |
| ruckusZDAPConfigSecondaryDnsV6IpAddress The AP Secondary DNS IPV6 Address. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.28 |
| ruckusZDAPConfigRadioType The AP Wireless type. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.30 |
| ruckusZDAPConfigRadioChannel24 The AP Channel selection on the 2.4 GHz radio.
The AP radio channel, selectable 0, 1-11,
0 : auto channel selection,
1-11 : specific channel selection. | column | Integer32 | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.31 |
| ruckusZDAPConfigRadioWlanGroup24 The AP WLAN group (name) selection on the 2.4 GHz radio. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.33 |
| ruckusZDAPConfigRadioEnableWlanService24 The AP enable wlan service flag on the 2.4 GHz radio. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.34 |
| ruckusZDAPConfigAPModel AP Model. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.4 |
| ruckusZDAPConfigRadioChannel5 The AP Channel selection on the 5 GHz radio.
The AP radio channel, selectable 0, 36-165,
0 : auto channel selection,
36-165 : specific channel selection. It is ruled by … | column | Integer32 | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.40 |
| ruckusZDAPConfigRadioTxPowerLevel5 The AP Tx Power level selection on the 5 GHz radio, auto(25) | 0 to 24 corresponding to 0 to -24dB from max power.
Now to be compatible with web, if txpower is more than 10, txpow… | column | dB Integer32 | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.41 |
| ruckusZDAPConfigRadioWlanGroup5 The AP WLAN group (name) selection on the 5 GHz radio. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.42 |
| ruckusZDAPConfigRadioEnableWlanService5 The AP enable wlan service flag on the 5 GHz radio. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.43 |
| ruckusZDAPConfigDeviceName AP Name. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.5 |
| ruckusZDAPConfigMeshConfigurationMode The AP Mesh network configuration mode. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.50 |
| ruckusZDAPConfigUplinkSelectionMode The AP network uplink selection mode.
For manual,now 'set' is not supported | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.51 |
| ruckusZDAPConfigApproveMode AP approval state.
For not-approved,'set' is not supported. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.52 |
| ruckusZDAPConfigDescription AP Description. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.6 |
| ruckusZDAPConfigManagementAdmin Admin action to remove this AP from the ZD management. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.60 |
| ruckusZDAPConfigRebootNow AP reboot right now. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.64 |
| ruckusZDAPConfigLocation AP Location. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.4.1.1.1.1.7 |