ruckusWebAuthVlan
RUCKUS-AUTH-MIB ·
.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.1
Object
column
VlanId
Specifies the VLAN, this configuration entry applies to.
Context
- MIB
- RUCKUS-AUTH-MIB
- OID
.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- ruckusWebAuthEntry
- Table
- ruckusWebAuthTable
- Siblings
- 23
Syntax
VlanId
- Source
- VlanId
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ruckusWebAuthMacAgeTime Specifies the the time which together with mac-age-time of the
switch is considered an inactive time of the authenticated
host, after which the device is forced to reauthenticate… | column | Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.10 |
| ruckusWebAuthPasscode Specifies the statically configured passcode used to
authenticate when passcode is used auth-method. The passcode
is digits only.
This can consist of upto 4 passco… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.11 |
| ruckusWebAuthLocalUserDb Specifies the locally configured User Database for use
in authentication, when the auth-methos is password. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.12 |
| ruckusWebAuthSecureLogin Specifies if HTTPS is used for authentication or not. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.13 |
| ruckusWebAuthAccounting Specifies if accounting is enbled or disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.14 |
| ruckusWebAuthCaptiveProfile Specifies the name of the configured Captive Portal profile,
which should be used for redirection, if the auth-method is
configured as captivePortal. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.15 |
| ruckusWebAuthRedirectName Specifies the name to be used for URL when internal authentication
is used dusring authentication for prompting username/password
from the users, otherwise switch IP address is us… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.16 |
| ruckusWebAuthWebpageRemoveUserId Specifies if user-id field in custom webauth login page is disabled or not,
default value is disable, i.e., user-id field is displayed | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.17 |
| ruckusWebAuthWebpageUsernameLabel Specifies the name to be used for user-id label in webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.18 |
| ruckusWebAuthWebpagePasswordLabel Specifies the name to be used for password label in webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.19 |
| ruckusWebAuthEnable Specifies if Web-Auth is enabled or disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.2 |
| ruckusWebAuthUpLinkPort Specifies the port to be used as uplink port in network segmentation deployment | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.20 |
| ruckusWebAuthWebpageTop Specifies the name to be used for Top of webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.21 |
| ruckusWebAuthWebpageBottom Specifies the name to be used for Bottom of webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.22 |
| ruckusWebAuthWebpageTitle Specifies the name to be used for Title in webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.23 |
| ruckusWebAuthWebpageLoginButton Specifies the name to be used for Login-button in webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.24 |
| ruckusWebAuthMode Specifies the authentication mode used for authenticating
the users.
none - no authentication is performed
passcode - passcode based authentication, where the
p… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.3 |
| ruckusWebAuthMethod When the AuthMode is configured as password, this specifies
the order for performing authentication.
radius - RADIUS server for authentication
local - Local user… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.4 |
| ruckusWebAuthMaxHosts Specifies the maximum number of hosts allowed to be
authenticated. Value 0 means no limit. | column | Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.5 |
| ruckusWebAuthMaxAuthAttempts Specifies the maximum number of attempts allowed during the
auth cycle, after which the user is blocked for configured
amount of time, before next authentication. The value of 0
m… | column | Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.6 |
| ruckusWebAuthReauthTime Specifies the re-authentication time, so the authenticated
users can be periodically reauthenticated after the timeout
specified through this object. Value 0 means no limit | column | seconds Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.7 |
| ruckusWebAuthCycleTime Specifies the time of the authentication since the first
attempted user authentication, after which the user is not
allowed to authenticate and must reload the login-page to
start… | column | seconds Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.8 |
| ruckusWebAuthBlockTime Specifies the time for blocking the user when successive
attempts have failed resulting in blocking the user. Value of
0 means, the user is blocked permanently. | column | seconds Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.9 |