ruckusWebAuthMaxAuthAttempts
RUCKUS-AUTH-MIB ·
.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.6
Object
column
Unsigned32
Specifies the maximum number of attempts allowed during the auth cycle, after which the user is blocked for configured amount of time, before next authentication. The value of 0 means no limit.
Context
- MIB
- RUCKUS-AUTH-MIB
- OID
.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ruckusWebAuthEntry
- Table
- ruckusWebAuthTable
- Siblings
- 23
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ruckusWebAuthVlan Specifies the VLAN, this configuration entry applies to. | column | VlanId | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.1 |
| ruckusWebAuthMacAgeTime Specifies the the time which together with mac-age-time of the
switch is considered an inactive time of the authenticated
host, after which the device is forced to reauthenticate… | column | Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.10 |
| ruckusWebAuthPasscode Specifies the statically configured passcode used to
authenticate when passcode is used auth-method. The passcode
is digits only.
This can consist of upto 4 passco… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.11 |
| ruckusWebAuthLocalUserDb Specifies the locally configured User Database for use
in authentication, when the auth-methos is password. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.12 |
| ruckusWebAuthSecureLogin Specifies if HTTPS is used for authentication or not. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.13 |
| ruckusWebAuthAccounting Specifies if accounting is enbled or disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.14 |
| ruckusWebAuthCaptiveProfile Specifies the name of the configured Captive Portal profile,
which should be used for redirection, if the auth-method is
configured as captivePortal. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.15 |
| ruckusWebAuthRedirectName Specifies the name to be used for URL when internal authentication
is used dusring authentication for prompting username/password
from the users, otherwise switch IP address is us… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.16 |
| ruckusWebAuthWebpageRemoveUserId Specifies if user-id field in custom webauth login page is disabled or not,
default value is disable, i.e., user-id field is displayed | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.17 |
| ruckusWebAuthWebpageUsernameLabel Specifies the name to be used for user-id label in webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.18 |
| ruckusWebAuthWebpagePasswordLabel Specifies the name to be used for password label in webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.19 |
| ruckusWebAuthEnable Specifies if Web-Auth is enabled or disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.2 |
| ruckusWebAuthUpLinkPort Specifies the port to be used as uplink port in network segmentation deployment | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.20 |
| ruckusWebAuthWebpageTop Specifies the name to be used for Top of webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.21 |
| ruckusWebAuthWebpageBottom Specifies the name to be used for Bottom of webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.22 |
| ruckusWebAuthWebpageTitle Specifies the name to be used for Title in webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.23 |
| ruckusWebAuthWebpageLoginButton Specifies the name to be used for Login-button in webauth login page | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.24 |
| ruckusWebAuthMode Specifies the authentication mode used for authenticating
the users.
none - no authentication is performed
passcode - passcode based authentication, where the
p… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.3 |
| ruckusWebAuthMethod When the AuthMode is configured as password, this specifies
the order for performing authentication.
radius - RADIUS server for authentication
local - Local user… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.4 |
| ruckusWebAuthMaxHosts Specifies the maximum number of hosts allowed to be
authenticated. Value 0 means no limit. | column | Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.5 |
| ruckusWebAuthReauthTime Specifies the re-authentication time, so the authenticated
users can be periodically reauthenticated after the timeout
specified through this object. Value 0 means no limit | column | seconds Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.7 |
| ruckusWebAuthCycleTime Specifies the time of the authentication since the first
attempted user authentication, after which the user is not
allowed to authenticate and must reload the login-page to
start… | column | seconds Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.8 |
| ruckusWebAuthBlockTime Specifies the time for blocking the user when successive
attempts have failed resulting in blocking the user. Value of
0 means, the user is blocked permanently. | column | seconds Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.9 |