ruckusWebAuthCycleTime

RUCKUS-AUTH-MIB · .1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.8
MIB view Table view

Object

column seconds Unsigned32 
Specifies the time of the authentication since the first
attempted user authentication, after which the user is not
allowed to authenticate and must reload the login-page to
start authentication. Value of 0 means no limit.

Context

MIB
RUCKUS-AUTH-MIB
OID
.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.8
Type
column
Access
readonly
Status
current
Units
seconds
Parent
ruckusWebAuthEntry
Table
ruckusWebAuthTable
Siblings
23

Syntax

seconds Unsigned32

Values & Constraints

Object Constraints
range: 0-3600

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ruckusWebAuthVlan
Specifies the VLAN, this configuration entry applies to.
columnVlanId.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.1
ruckusWebAuthMacAgeTime
Specifies the the time which together with mac-age-time of the switch is considered an inactive time of the authenticated host, after which the device is forced to reauthenticate…
columnUnsigned32.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.10
ruckusWebAuthPasscode
Specifies the statically configured passcode used to authenticate when passcode is used auth-method. The passcode is digits only. This can consist of upto 4 passco…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.11
ruckusWebAuthLocalUserDb
Specifies the locally configured User Database for use in authentication, when the auth-methos is password.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.12
ruckusWebAuthSecureLogin
Specifies if HTTPS is used for authentication or not.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.13
ruckusWebAuthAccounting
Specifies if accounting is enbled or disabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.14
ruckusWebAuthCaptiveProfile
Specifies the name of the configured Captive Portal profile, which should be used for redirection, if the auth-method is configured as captivePortal.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.15
ruckusWebAuthRedirectName
Specifies the name to be used for URL when internal authentication is used dusring authentication for prompting username/password from the users, otherwise switch IP address is us…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.16
ruckusWebAuthWebpageRemoveUserId
Specifies if user-id field in custom webauth login page is disabled or not, default value is disable, i.e., user-id field is displayed
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.17
ruckusWebAuthWebpageUsernameLabel
Specifies the name to be used for user-id label in webauth login page
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.18
ruckusWebAuthWebpagePasswordLabel
Specifies the name to be used for password label in webauth login page
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.19
ruckusWebAuthEnable
Specifies if Web-Auth is enabled or disabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.2
ruckusWebAuthUpLinkPort
Specifies the port to be used as uplink port in network segmentation deployment
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.20
ruckusWebAuthWebpageTop
Specifies the name to be used for Top of webauth login page
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.21
ruckusWebAuthWebpageBottom
Specifies the name to be used for Bottom of webauth login page
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.22
ruckusWebAuthWebpageTitle
Specifies the name to be used for Title in webauth login page
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.23
ruckusWebAuthWebpageLoginButton
Specifies the name to be used for Login-button in webauth login page
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.24
ruckusWebAuthMode
Specifies the authentication mode used for authenticating the users. none - no authentication is performed passcode - passcode based authentication, where the p…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.3
ruckusWebAuthMethod
When the AuthMode is configured as password, this specifies the order for performing authentication. radius - RADIUS server for authentication local - Local user…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.4
ruckusWebAuthMaxHosts
Specifies the maximum number of hosts allowed to be authenticated. Value 0 means no limit.
columnUnsigned32.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.5
ruckusWebAuthMaxAuthAttempts
Specifies the maximum number of attempts allowed during the auth cycle, after which the user is blocked for configured amount of time, before next authentication. The value of 0 m…
columnUnsigned32.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.6
ruckusWebAuthReauthTime
Specifies the re-authentication time, so the authenticated users can be periodically reauthenticated after the timeout specified through this object. Value 0 means no limit
columnseconds Unsigned32.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.7
ruckusWebAuthBlockTime
Specifies the time for blocking the user when successive attempts have failed resulting in blocking the user. Value of 0 means, the user is blocked permanently.
columnseconds Unsigned32.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.9