ruckusAuthSessionAge

RUCKUS-AUTH-MIB · .1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.12
MIB view Table view

Object

column seconds SNMPv2-SMIUnsigned32 
When the aging type is either software or hardware, 
this object indicates the time, the session had been
in that state. When the configured maximum time is
reached, the aging state moves from hardware to 
software or session is cleared.

Context

MIB
RUCKUS-AUTH-MIB
OID
.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.12
Type
column
Access
readonly
Status
current
Units
seconds
Parent
ruckusAuthSessionEntry
Table
ruckusAuthSessionTable
Siblings
24

Syntax

seconds SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ruckusAuthSessionMac
Specifies the MAC Address of the client (device/host) represented by this session entry
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.1
ruckusAuthSessionDot1xStatus
Indicates the state of Dot1x authentication, if the client is using Dot1x for authentication.
columnDot1xAuthState.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.10
ruckusAuthSessionAgingType
Indicates the aging status of the client session which can be of the following values. software(1): Client MAC entry is cleared as the entry timedout in hardware …
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.11
ruckusAuthSessionTimeout
Specifies the maximum amount of time, the session should exit before re-authenticating or terminating the sessions depending on another RADIUS attribute 'Termination-Action'.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.13
ruckusAuthSessionIdleTimeout
Specifies the maximum amount of time after which the session is cleared when there is no traffic from the client. A value of 0 means, the sessions never gets terminated due to ina…
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.14
ruckusAuthSessionTime
Indcates the session UP time since the session had been up or created.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.15
ruckusAuthSessionV4IngressAcl
Specifies the User Access List (ACL) applied in the Ingress direction for the IPv4 traffic for this client on this port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.16
ruckusAuthSessionV4EgressAcl
Specifies the User Access List (ACL) applied in the Egress direction for the IPv4 traffic for this client on this port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.17
ruckusAuthSessionV6IngressAcl
Specifies the User Access List (ACL) applied in the Ingress direction for the IPv6 traffic for this client on this port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.18
ruckusAuthSessionV6EgressAcl
Specifies the User Access List (ACL) applied in the Egress direction for the IPv6 traffic for this client on this port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.19
ruckusAuthSessionVlan
Specifies the VLAN, the client (device/host) belongs to, represented by this session entry. In case of voice-phones, this VLAN is the voice-VLAN (tagged) and in all…
columnVlanId.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.2
ruckusAuthSessionTxOctets
Specifies the number bytes sent for this session on the port.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.20
ruckusAuthSessionRxOctets
Specifies the number bytes received for this session on the port.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.21
ruckusAuthSessionTxPkts
Specifies the number bytes sent for this session on the port.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.22
ruckusAuthSessionRxPkts
Specifies the number bytes received for this session on the port.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.23
ruckusAuthSessionFailureReason
Specifies the internal failure reason for this client, such as memory allocation, RADIUS attribute parsing, RADIUS REJECT, etc.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.24
ruckusAuthSessionFlags
Desacribes various other parameters of client session, by clubbing them together in one object for simplicity. staticAuthenticated(0): Client is authenticaticated …
columnBits.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.25
ruckusAuthSessionVlanType
Decribes the type of the VLAN associated with the session. default(1) - Default VLANs as configured on Ruckus device restrict(2) - Restricted VLAN as authenticatio…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.3
ruckusAuthSessionTaggedVlan
Tagged VLAN or Voice VLAN sent by the RADIUS server, so the port gets added to the VLAN, to prepare the device to send tagged packets in case of phones.
columnVlanId.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.4
ruckusAuthSessionUserName
Indicates the User name associated with the client, represented by this session. In case of Dot1x sessions, it's the username used by the user to log into the netw…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.5
ruckusAuthSessionDeviceType
Decribes the type of the client connnected and authenticated on this port.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.6
ruckusAuthSessionMethod
Specifies the authentication method that is used for authenticating the client on this port represented by this session. It's possible that both authentication meth…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.7
ruckusAuthSessionMode
Indicates the authentication mode applied for this client on this port.
columnRuckusAuthMode.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.8
ruckusAuthSessionStatus
The authentication state of the session which can take the following values. allowed - client authentication is successful, so the complete access is granted bl…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.9