ruckusAuthPortDosAttacks

RUCKUS-AUTH-MIB · .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.16
MIB view Table view

Object

column P-BRIDGE-MIBEnabledStatus 
Specifies to prevent/allow Denial of Service attacks
on this port. Constantly sending packets from
different clients (MAC addresses) causes DOS, as the
clients are not allowed without authentication,
which may cause exhausing of system resources.

Context

MIB
RUCKUS-AUTH-MIB
OID
.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.16
Type
column
Access
readonly
Status
current
Parent
ruckusAuthPortEntry
Table
ruckusAuthPortTable
Siblings
16

Syntax

P-BRIDGE-MIBEnabledStatus
Source
P-BRIDGE-MIBEnabledStatus
Base type
Enumeration

Values & Constraints

Type Values
1enabled
2disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ruckusAuthPortEnable
Specifies authentication methods that are enabled on this port. Unless the method is enabled globally, the same can't be enabled at port level. A bit field of '1' indicates enable…
columnBits.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.1
ruckusAuthPortFailAction
Specifies the action to be taken on this port. This overrides the globally set value.
columnRuckusAuthFailAction.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.10
ruckusAuthPortTimeoutAction
Specifies the action to be taken on this port, when the authentication server times out for various readons like server busy, network access, etc. This overrides the globally set…
columnRuckusAuthTimeoutAction.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.11
ruckusAuthPortReauthTimeout
How often to re-authenticates clients of this port, when the clients were allowed due to authentication server timeout. Value of 0 disables the re-authentication.
columnseconds Unsigned32.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.12
ruckusAuthPortAging
Specifies, if denied and permitted sessions are enabled or disabled for aging on this port. This overrided the global value.
columnRuckusAuthAging.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.13
ruckusAuthPortAllowTagged
Specifies, if denied and permitted sessions are enabled or disabled for aging on this port. A bit field of '1' indicates enabled, otherwise disabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.14
ruckusAuthPortSourceGuard
Source guard enabling ensures that the client IP address to be learned and allow the packets matching that IP address only. This is implied when user ACLs are applied on the port,…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.15
ruckusAuthPortDosAttackLimit
The maximum number of clients to be allowed at any time without authentication, and if authentication pending clients exceed the configured limit (as specified by this object), th…
columnUnsigned32.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.17
ruckusAuthPortDot1xControl
Specifies the Dot1x operating mode for this port, when Dot1x is enabled. force-unauthorized(1)- port's controlled port is placed unconditionally in the una…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.2
ruckusAuthPortDefaultVlan
This default VLAN is used to place this port, so this VLAN acts as a VLAN for the clients to belong to, when authentication server doesn't assign any VLANs. A val…
columnVlanId.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.3
ruckusAuthPortVoiceVlan
This voice VLAN is used to advertise through LLDP/CDP on this port, when connected devices are detected as Phones and authentication server doesn't assign any Voice VLAN. …
columnVlanId.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.4
ruckusAuthPortCriticalVlan
This VLAN is used to place the clients of this port, when the authentication server times out and the port auth-timeout-action is configired as 'critical', so the clients have l…
columnVlanId.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.5
ruckusAuthPortRestrictVlan
This VLAN is used to place the clients of this port, when the clients fail the authentication and the auth-failure-action is configured as 'restrict', so the clients have limited …
columnVlanId.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.6
ruckusAuthPortMode
Specifies the authentication mode for this port. This overrides the globally configured value.
columnRuckusAuthMode.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.7
ruckusAuthPortMethods
Specifies authentication methods to be attempted in series of methods for this port. This overrides the globally configured value.
columnRuckusAuthOrder.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.8
ruckusAuthPortMaxSessions
Specifies the maximum number of authenticated clients allowed on this port. This doesn't include the clients allowed due to authentication failure and timeout policies.
columnUnsigned32.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.9