ruckusAuthPortCriticalVlan
RUCKUS-AUTH-MIB ·
.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.5
Object
column
VlanId
This VLAN is used to place the clients of this port,
when the authentication server times out and the
port auth-timeout-action is configired as
'critical', so the clients have limited access.
Refer to ruckusAuthPortTimeoutAction object for
timeout-action choices.
A value of zero for this object indicates no
Critical Vlan is configured for this port on this
Ruckus device, so the global Critical VLAN is used.
Context
- MIB
- RUCKUS-AUTH-MIB
- OID
.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ruckusAuthPortEntry
- Table
- ruckusAuthPortTable
- Siblings
- 16
Syntax
VlanId
- Source
- VlanId
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ruckusAuthPortEnable Specifies authentication methods that are enabled on
this port. Unless the method is enabled globally,
the same can't be enabled at port level. A bit field
of '1' indicates enable… | column | Bits | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.1 |
| ruckusAuthPortFailAction Specifies the action to be taken on this port. This
overrides the globally set value. | column | RuckusAuthFailAction | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.10 |
| ruckusAuthPortTimeoutAction Specifies the action to be taken on this port, when
the authentication server times out for various
readons like server busy, network access, etc. This
overrides the globally set… | column | RuckusAuthTimeoutAction | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.11 |
| ruckusAuthPortReauthTimeout How often to re-authenticates clients of this port,
when the clients were allowed due to authentication
server timeout. Value of 0 disables the
re-authentication. | column | seconds Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.12 |
| ruckusAuthPortAging Specifies, if denied and permitted sessions are
enabled or disabled for aging on this port. This
overrided the global value. | column | RuckusAuthAging | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.13 |
| ruckusAuthPortAllowTagged Specifies, if denied and permitted sessions are
enabled or disabled for aging on this port. A bit
field of '1' indicates enabled, otherwise disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.14 |
| ruckusAuthPortSourceGuard Source guard enabling ensures that the client IP
address to be learned and allow the packets matching
that IP address only. This is implied when user ACLs
are applied on the port,… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.15 |
| ruckusAuthPortDosAttacks Specifies to prevent/allow Denial of Service attacks
on this port. Constantly sending packets from
different clients (MAC addresses) causes DOS, as the
clients are not allowed wit… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.16 |
| ruckusAuthPortDosAttackLimit The maximum number of clients to be allowed at any
time without authentication, and if authentication
pending clients exceed the configured limit (as
specified by this object), th… | column | Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.17 |
| ruckusAuthPortDot1xControl Specifies the Dot1x operating mode for this port,
when Dot1x is enabled.
force-unauthorized(1)- port's controlled port is
placed unconditionally in
the una… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.2 |
| ruckusAuthPortDefaultVlan This default VLAN is used to place this port, so
this VLAN acts as a VLAN for the clients to belong
to, when authentication server doesn't assign any
VLANs.
A val… | column | VlanId | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.3 |
| ruckusAuthPortVoiceVlan This voice VLAN is used to advertise through
LLDP/CDP on this port, when connected devices are
detected as Phones and authentication server doesn't
assign any Voice VLAN.
… | column | VlanId | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.4 |
| ruckusAuthPortRestrictVlan This VLAN is used to place the clients of this port,
when the clients fail the authentication and the
auth-failure-action is configured as 'restrict', so
the clients have limited … | column | VlanId | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.6 |
| ruckusAuthPortMode Specifies the authentication mode for this port.
This overrides the globally configured value. | column | RuckusAuthMode | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.7 |
| ruckusAuthPortMethods Specifies authentication methods to be attempted in
series of methods for this port. This overrides the
globally configured value. | column | RuckusAuthOrder | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.8 |
| ruckusAuthPortMaxSessions Specifies the maximum number of authenticated
clients allowed on this port. This doesn't include
the clients allowed due to authentication failure
and timeout policies. | column | Unsigned32 | .1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.9 |