fgs2528kxERPSInstanceConfHoldOffTime
RUBYTECH-FGS2528KX-MIB ·
.1.3.6.1.4.1.5205.2.77.2.10.1.2.1.17
Object
column
r/w
Integer32
The timing value to be used to make persistent check on Signal Fail before switching. default : 0(seconds). range : 0 - 10000(ms).
Context
- MIB
- RUBYTECH-FGS2528KX-MIB
- OID
.1.3.6.1.4.1.5205.2.77.2.10.1.2.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fgs2528kxERPSConfEntry
- Table
- fgs2528kxERPSConfTable
- Siblings
- 20
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-10000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fgs2528kxERPSConfIndex | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.1 |
| fgs2528kxERPSConfInterconnectedNode Interconnected Node indicates that the ring instance is interconnected.
default: 0,
0: No - indicates that the configured instance is not interconnected.
1: Yes - indicates it … | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.10 |
| fgs2528kxERPSConfVirtualChannel Sub-rings can either have virtual channel or not on the interconnected node.
default: 0,
0: No - indicates, sub-ring doesn't have virtual channel.
1: Yes - indicates it is a sub… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.11 |
| fgs2528kxERPSConfMajorRingID Major ring group ID for the interconnected sub-ring.
It is used to send topology change updates on major ring.
If ring is major, this value is same as the protection group ID of… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.12 |
| fgs2528kxERPSConfAlarm There is an active alarm on the ERPS. | column | OctetString | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.13 |
| fgs2528kxERPSInstanceConfConfigured Down: This ERPS is only created and has not yet been configured - is not active.
Up: This ERPS is configured - is active. | column | OctetString | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.14 |
| fgs2528kxERPSInstanceConfGuardTime Guard timeout value to be used to prevent ring nodes from receiving outdated R-APS messages.
default : 500(ms).
range : 10 - 2000(ms). | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.15 |
| fgs2528kxERPSInstanceConfWTRTime The Wait To Restore timing value to be used in revertive switching.
default : 5(minutes).
range : 1 - 12(minutes). | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.16 |
| fgs2528kxERPSInstanceConfVersion ERPS version of a group.
default : 1.
0: v1
1: v2 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.18 |
| fgs2528kxERPSInstanceConfRevertive ERPS revertibility of a group.
default : 1.
0: non-revertible
1: revertible | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.19 |
| fgs2528kxERPSConfERPSID Protection group ID.
range : 1 - 64. | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.2 |
| fgs2528kxERPSInstanceConfVLANconfig VID of the protected vlan. | column | OctetString | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.20 |
| fgs2528kxERPSConfRowStatus 1: active
2: notInservice
3: edit
4: destroy
5: undo | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.21 |
| fgs2528kxERPSConfPort0 East port of the switch in the ring.
range : 1 - 26. | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.3 |
| fgs2528kxERPSConfPort1 West port of the switch in the Ring.
As interconnected sub-ring will have only one ring port, W port is configured as 0 for interconnected sub-ring.
0: in this field indicates t… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.4 |
| fgs2528kxERPSConfPort0SFMEP The East Signal Fail reporting MEP.
range : 1 - 32. | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.5 |
| fgs2528kxERPSConfPort1SFMEP The West Signal Fail reporting MEP. As only one SF MEP is associated with interconnected sub-ring without virtual channel,
it is configured as 0 for such ring instances. 0: in thi… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.6 |
| fgs2528kxERPSConfPort0APSMEP The East APS PDU handling MEP.
range : 1 - 32. | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.7 |
| fgs2528kxERPSConfPort1APSMEP The West APS PDU handling MEP. As only one APS MEP is associated with interconnected sub-ring without virtual channel,
it is configured as 0 for such ring instances. 0: in this fi… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.8 |
| fgs2528kxERPSConfRingType Type of Protectiong ring. It can be either major ring or sub-ring.
default: 0,
0: Major
1: Sub | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.10.1.2.1.9 |