fgs2528kxACLACEEtherType
RUBYTECH-FGS2528KX-MIB ·
.1.3.6.1.4.1.5205.2.77.2.9.3.2.1.17
Object
column
r/w
Integer32
0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6). range : 0 or 1536(0x0600)- 65535(0xffff).
Context
- MIB
- RUBYTECH-FGS2528KX-MIB
- OID
.1.3.6.1.4.1.5205.2.77.2.9.3.2.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fgs2528kxACLACEEntry
- Table
- fgs2528kxACLACETable
- Siblings
- 47
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fgs2528kxACLACEIndex | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.1 |
| fgs2528kxACLACELogging default: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log. | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.10 |
| fgs2528kxACLACERateLimiter default: 0,
0: Disable
range : 0 - 16 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.12 |
| fgs2528kxACLACEShutdown default: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled. | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.13 |
| fgs2528kxACLACEVLANTagPriority Specify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.15 |
| fgs2528kxACLACEVLANVID Specify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.16 |
| fgs2528kxACLACESMAC Configure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.18 |
| fgs2528kxACLACEDMACType DMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address
rang… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.19 |
| fgs2528kxACLACEID If the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256. | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.2 |
| fgs2528kxACLACEDMAC Configure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Fram… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.20 |
| fgs2528kxACLACEArpOpcode Configure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 3 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.21 |
| fgs2528kxACLACEArpFlagsRequestReply Specify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP fla… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.22 |
| fgs2528kxACLACEArpFlagsArpSmac Specify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1:… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.23 |
| fgs2528kxACLACEArpFlagsRarpDmac Specify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.24 |
| fgs2528kxACLACEArpFlagsLength Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames wher… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.25 |
| fgs2528kxACLACEArpFlagsIp Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.26 |
| fgs2528kxACLACEArpFlagsEthernet Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x80… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.27 |
| fgs2528kxACLACESIPType Configure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.28 |
| fgs2528kxACLACESIPIPAddress A frame that hits this ACE matches this source IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.29 |
| fgs2528kxACLACENextID If the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256. | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.3 |
| fgs2528kxACLACESIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.30 |
| fgs2528kxACLACEDIPType Configure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.32 |
| fgs2528kxACLACEDIPIPAddress A frame that hits this ACE matches this destination IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.33 |
| fgs2528kxACLACEDIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.34 |
| fgs2528kxACLACEIPProtocol Configure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.36 |
| fgs2528kxACLACEIPFlagsTTL Configure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2:… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.37 |
| fgs2528kxACLACEIPFlagsOptions Configure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.38 |
| fgs2528kxACLACEIPFlagsFragment Configure IP fragment offset flags for this ACE.
default: 2,
0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero.
1: IPv4 frames where the MF bit is s… | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.39 |
| fgs2528kxACLACEIngressPort Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.4 |
| fgs2528kxACLACEICMPType Configure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.40 |
| fgs2528kxACLACEICMPCode Configure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.41 |
| fgs2528kxACLACESourcePortMin Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.42 |
| fgs2528kxACLACESourcePortMax Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.43 |
| fgs2528kxACLACEDestPortMin Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.44 |
| fgs2528kxACLACEDestPortMax Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.45 |
| fgs2528kxACLACETCPFlagsFin Configure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.46 |
| fgs2528kxACLACETCPFlagsSyn Configure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.47 |
| fgs2528kxACLACETCPFlagsRst Configure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.48 |
| fgs2528kxACLACETCPFlagsPsh Configure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.49 |
| fgs2528kxACLACEPortPolicyNumber policy value.
range : 0 - 255. | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.5 |
| fgs2528kxACLACETCPFlagsAck Configure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.50 |
| fgs2528kxACLACETCPFlagsUrg Configure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.51 |
| fgs2528kxACLACEPortPolicyBitmask policy bitmask.
range : 0 - 255(0xff). | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.6 |
| fgs2528kxACLACERowStatus 1: active
2: notInservice
4: destroy
5: undo | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.66 |
| fgs2528kxACLACEFrameType 0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp. | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.7 |
| fgs2528kxACLACEAction default: 1,
0: Deny
1: Permit | column | Integer32 | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.8 |
| fgs2528kxACLACEDenyPortRedirect Frames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.77.2.9.3.2.1.9 |