agentOspfRoutePrefExternal

ROUTING-MIB · .1.3.6.1.4.1.7244.2.2.4.22

Object

scalar r/w Integer32

The route preference, sometimes called administrative distance, for external OSPFv2 routes.
A route with a preference of 255 is considered unreachable.

Context

MIB: ROUTING-MIB
OID: .1.3.6.1.4.1.7244.2.2.4.22
Type: scalar
Access: readwrite
Status: current
Parent: agentRouterOspfConfigGroup
Siblings: 22

Syntax

Integer32

Values & Constraints

Object Constraints

range: 1-255

Related Objects

Sibling Objects

Object	Type	Syntax	OID
agentOspfDefaultMetric Default metric of redistributed routes, when OSPF redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not be set. Valid rang…	scalar	Integer32	`.1.3.6.1.4.1.7244.2.2.4.1`
agentOspfVirtIfTable Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.	table	-	`.1.3.6.1.4.1.7244.2.2.4.10`
agentRouterOspfRFC1583CompatibilityMode From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the prefer…	scalar	Enumeration	`.1.3.6.1.4.1.7244.2.2.4.11`
agentOspfSpfDelayTime Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default time is 5 seconds. A …	scalar	SpfTimerRange	`.1.3.6.1.4.1.7244.2.2.4.12`
agentOspfSpfHoldTime Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means that there is no delay…	scalar	SpfTimerRange	`.1.3.6.1.4.1.7244.2.2.4.13`
agentOspfAutoCostRefBw Auto cost refernece bandwidth of the router interafaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps.	scalar	AutoCostRefBw	`.1.3.6.1.4.1.7244.2.2.4.14`
agentOspfOpaqueLsaSupport The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7244.2.2.4.15`
agentOspfAreaOpaqueLsdbTable The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached to.	table	-	`.1.3.6.1.4.1.7244.2.2.4.16`
agentOspfLocalLsdbTable The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local Link State Adve…	table	-	`.1.3.6.1.4.1.7244.2.2.4.17`
agentOspfAsLsdbTable The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. …	table	-	`.1.3.6.1.4.1.7244.2.2.4.18`
agentOspfDefaultPassiveMode Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7244.2.2.4.19`
agentOspfDefaultMetricConfigured Flag to determine whether OSPF default-metric is configured or not. Set to 'false' to unconfigure the OSPF default-metric. Set to 'true' is not allowed.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7244.2.2.4.2`
agentOspfRoutePrefIntraArea The route preference, sometimes called administrative distance, for intra-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.	scalar	Integer32	`.1.3.6.1.4.1.7244.2.2.4.20`
agentOspfRoutePrefInterArea The route preference, sometimes called administrative distance, for inter-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.	scalar	Integer32	`.1.3.6.1.4.1.7244.2.2.4.21`
agentOspfNetworkAreaTable The OSPF Global Area Id Configuration Table.	table	-	`.1.3.6.1.4.1.7244.2.2.4.23`
agentOspfDefaultInfoOriginate Flag to determine, whether OSPF can advertise a default-route learned from another protocol.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7244.2.2.4.3`
agentOspfDefaultInfoOriginateAlways When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a def…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7244.2.2.4.4`
agentOspfDefaultInfoOriginateMetric Metric of the default route, which OSPF advertises when learned from other protocol. (0) indicates that the parameter is not configured, this value should not be set. Valid rang…	scalar	Integer32	`.1.3.6.1.4.1.7244.2.2.4.5`
agentOspfDefaultInfoOriginateMetricConfigured Flag to determine whether OSPF default-info originate metric is configured or not. Setting to false unconfigures the default route metric. Setting to true is not allowed.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7244.2.2.4.6`
agentOspfDefaultInfoOriginateMetricType Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).	scalar	Enumeration	`.1.3.6.1.4.1.7244.2.2.4.7`
agentOspfRouteRedistTable This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP,…	table	-	`.1.3.6.1.4.1.7244.2.2.4.8`
agentOspfIfTable The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.	table	-	`.1.3.6.1.4.1.7244.2.2.4.9`

Indexes