lapbOperPortId
RFC1381-MIB ·
.1.3.6.1.2.1.10.16.2.1.13
Object
column
mandatory
ObjectIdentifier
This object identifies an instance of the
index object in the first group of objects
in the MIB specific to the physical device
or interface used to send and receive
frames. If an agent does not support any
such objects, it should return nullSpec
OBJECT IDENTIFIER {0 0}.
Context
- MIB
- RFC1381-MIB
- OID
.1.3.6.1.2.1.10.16.2.1.13- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- lapbOperEntry
- Table
- lapbOperTable
- Siblings
- 13
Syntax
ObjectIdentifier
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lapbOperIndex mandatory The ifIndex value for the LAPB interface. | column | IfIndexType | .1.3.6.1.2.1.10.16.2.1.1 |
| lapbOperT2AckDelayTimer mandatory The current T2 timer for this interface.
This specifies the maximum time in
Milliseconds to wait before sending an
acknowledgment for a sequenced PDU. A value
of zero means there… | column | PositiveInteger | .1.3.6.1.2.1.10.16.2.1.10 |
| lapbOperT3DisconnectTimer mandatory The current T3 timer for this interface.
This specifies the time in Milliseconds to
wait before considering the link
disconnected. A value of zero indicates the
link will be cons… | column | PositiveInteger | .1.3.6.1.2.1.10.16.2.1.11 |
| lapbOperT4IdleTimer mandatory The current T4 timer for this interface.
This specifies the maximum time in
Milliseconds to allow without frames being
exchanged on the data link. A value of
2147483647 indicates… | column | PositiveInteger | .1.3.6.1.2.1.10.16.2.1.12 |
| lapbOperProtocolVersionId mandatory This object identifies the version of the
lapb protocol implemented by this
interface. | column | ObjectIdentifier | .1.3.6.1.2.1.10.16.2.1.14 |
| lapbOperStationType mandatory Identifies the current operating station
type of this interface. A value of dxe (3)
indicates XID negotiation has not yet taken
place. | column | Enumeration | .1.3.6.1.2.1.10.16.2.1.2 |
| lapbOperControlField mandatory The current operating size of the sequence
numbers used to number frames. | column | Enumeration | .1.3.6.1.2.1.10.16.2.1.3 |
| lapbOperTransmitN1FrameSize mandatory The current operating N1 frame size used
for the maximum number of bits in a frame
this DTE can transmit. This excludes flags
and 0 bits inserted for transparency. | column | PositiveInteger | .1.3.6.1.2.1.10.16.2.1.4 |
| lapbOperReceiveN1FrameSize mandatory The current operating N1 frame size used
for the maximum number of bits in a frame
the DCE/remote DTE can transmit. This
excludes flags and 0 bits inserted for
transparency. | column | PositiveInteger | .1.3.6.1.2.1.10.16.2.1.5 |
| lapbOperTransmitKWindowSize mandatory The current PDU window size this Interface
uses to transmit. This is the maximum
number of unacknowledged sequenced PDUs that
may be outstanding from this DTE at a… | column | Integer32 | .1.3.6.1.2.1.10.16.2.1.6 |
| lapbOperReceiveKWindowSize mandatory The current receive PDU window size for
this Interface. This is the maximum number
of unacknowledged sequenced PDUs that may be
outstanding from the DCE/remote DTE at any
one tim… | column | Integer32 | .1.3.6.1.2.1.10.16.2.1.7 |
| lapbOperN2RxmitCount mandatory The current N2 retry counter used for this
interface. This specifies the number of
times a PDU will be resent after the T1
timer expires without an acknowledgement for
the PDU. | column | Integer32 | .1.3.6.1.2.1.10.16.2.1.8 |
| lapbOperT1AckTimer mandatory The current T1 timer for this interface.
This specifies the maximum time in
Milliseconds to wait for acknowledgment of a
PDU. | column | PositiveInteger | .1.3.6.1.2.1.10.16.2.1.9 |