lapbAdmnIndex
RFC1381-MIB ·
.1.3.6.1.2.1.10.16.1.1.1
Object
column
mandatory
IfIndexType
The ifIndex value for the LAPB interface.
Context
- MIB
- RFC1381-MIB
- OID
.1.3.6.1.2.1.10.16.1.1.1- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- lapbAdmnEntry
- Table
- lapbAdmnTable
- Siblings
- 13
Syntax
IfIndexType
- Source
- IfIndexType
- Base type
Integer32
Values & Constraints
Type Constraints
range: 1..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lapbAdmnT2AckDelayTimer mandatory The default T2 timer for this interface.
This specifies the maximum time in
Milliseconds to wait before sending an
acknowledgment for a sequenced PDU. A value
of zero means there… | column | PositiveInteger | .1.3.6.1.2.1.10.16.1.1.10 |
| lapbAdmnT3DisconnectTimer mandatory The T3 timer for this interface. This
specifies the time in Milliseconds to wait
before considering the link disconnected. A
value of zero indicates the link will be
considered … | column | PositiveInteger | .1.3.6.1.2.1.10.16.1.1.11 |
| lapbAdmnT4IdleTimer mandatory The T4 timer for this interface. This
specifies the maximum time in Milliseconds
to allow without frames being exchanged on
the data link. A value of 2147483647
indicates no idl… | column | PositiveInteger | .1.3.6.1.2.1.10.16.1.1.12 |
| lapbAdmnActionInitiate mandatory This identifies the action LAPB will take
to initiate link set-up. | column | Enumeration | .1.3.6.1.2.1.10.16.1.1.13 |
| lapbAdmnActionRecvDM mandatory This identifies the action LAPB will take
when it receives a DM response. | column | Enumeration | .1.3.6.1.2.1.10.16.1.1.14 |
| lapbAdmnStationType mandatory Identifies the desired station type of this
interface. | column | Enumeration | .1.3.6.1.2.1.10.16.1.1.2 |
| lapbAdmnControlField mandatory The desired size of the sequence numbers
used to number frames. | column | Enumeration | .1.3.6.1.2.1.10.16.1.1.3 |
| lapbAdmnTransmitN1FrameSize mandatory The default maximum N1 frame size desired
in number of bits for a frame transmitted by
this DTE. This excludes flags and 0 bits
inserted for transparency. | column | PositiveInteger | .1.3.6.1.2.1.10.16.1.1.4 |
| lapbAdmnReceiveN1FrameSize mandatory The default maximum N1 frame size desired
in number of bits for a frame the DCE/remote
DTE transmits to this DTE. This excludes
flags and 0 bits inserted for transparency. | column | PositiveInteger | .1.3.6.1.2.1.10.16.1.1.5 |
| lapbAdmnTransmitKWindowSize mandatory The default transmit window size for this
Interface. This is the maximum number of
unacknowledged sequenced PDUs that may be
outstanding from this DTE at any one time. | column | Integer32 | .1.3.6.1.2.1.10.16.1.1.6 |
| lapbAdmnReceiveKWindowSize mandatory The default receive window size for this
Interface. This is the maximum number of
unacknowledged sequenced PDUs that may be
outstanding from the DCE/remote DTE at … | column | Integer32 | .1.3.6.1.2.1.10.16.1.1.7 |
| lapbAdmnN2RxmitCount mandatory The default N2 retry counter for this
interface. This specifies the number of
times a PDU will be resent after the T1
timer expires without an acknowledgement for
the PDU. | column | Integer32 | .1.3.6.1.2.1.10.16.1.1.8 |
| lapbAdmnT1AckTimer mandatory The default T1 timer for this interface.
This specifies the maximum time in
Milliseconds to wait for acknowledgment of a
PDU. | column | PositiveInteger | .1.3.6.1.2.1.10.16.1.1.9 |