snmpFddiPORTCEState
RFC1285-MIB ·
.1.3.6.1.2.1.10.15.4.2.1.7
Object
column
mandatory
Enumeration
Indicates the current state of PORT's Configuration Element (CE) (refer to ANSI 9.7.5). Note that this value represents the Current Path information for this PORT.
Context
- MIB
- RFC1285-MIB
- OID
.1.3.6.1.2.1.10.15.4.2.1.7- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- snmpFddiPORTEntry
- Table
- snmpFddiPORTTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ce0 |
2 | ce1 |
3 | ce2 |
4 | ce3 |
5 | ce4 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snmpFddiPORTSMTIndex mandatory The value of the SMT index associated with this
PORT. | column | Integer32 | .1.3.6.1.2.1.10.15.4.2.1.1 |
| snmpFddiPORTAvailablePaths mandatory A value that indicates the PATH types available
for M and S PORTs.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
t… | column | Integer32 | .1.3.6.1.2.1.10.15.4.2.1.10 |
| snmpFddiPORTMACLoopTime mandatory Time for the optional MAC Local Loop, T_Next(9),
which is greater-than or equal-to 200 milliseconds
(refer to ANSI SMT 9.4.4.2.3). | column | FddiTime | .1.3.6.1.2.1.10.15.4.2.1.11 |
| snmpFddiPORTTBMax mandatory TB_Max (refer to ANSI SMT 9.4.4.2.1). | column | FddiTime | .1.3.6.1.2.1.10.15.4.2.1.12 |
| snmpFddiPORTBSFlag mandatory The Break State, BS_Flag (refer to ANSI SMT
9.4.3.4). | column | Enumeration | .1.3.6.1.2.1.10.15.4.2.1.13 |
| snmpFddiPORTLCTFailCts mandatory The count of the consecutive times the link
confidence test (LCT) has failed during connection
management (refer to ANSI 9.4.1). | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.15.4.2.1.14 |
| snmpFddiPORTLerEstimate mandatory A long term average link error rate. It ranges
from 10**-4 to 10**-15 and is reported as the
absolute value of the exponent of the estimate. | column | Integer32 | .1.3.6.1.2.1.10.15.4.2.1.15 |
| snmpFddiPORTLemRejectCts mandatory A link error monitoring count of the times that a
link has been rejected. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.15.4.2.1.16 |
| snmpFddiPORTLemCts mandatory The aggregate link error monitor error count, set
to zero only on station power_up. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.15.4.2.1.17 |
| snmpFddiPORTLerCutoff mandatory The link error rate estimate at which a link
connection will be broken. It ranges from 10**-4
to 10**-15 and is reported as the absolute value
of the exponent. | column | Integer32 | .1.3.6.1.2.1.10.15.4.2.1.18 |
| snmpFddiPORTLerAlarm mandatory The link error rate estimate at which a link
connection will generate an alarm. It ranges from
10**-4 to 10**-15 and is reported as the absolute
value of the exponent of the esti… | column | Integer32 | .1.3.6.1.2.1.10.15.4.2.1.19 |
| snmpFddiPORTIndex mandatory A unique value for each PORT within a given SMT.
Its value ranges between 1 and the sum of the
values of snmpFddiSMTNonMasterCt
{ snmpFddiSMTEntry 6 } and snmpFddiSMTMasterCt
{ sn… | column | Integer32 | .1.3.6.1.2.1.10.15.4.2.1.2 |
| snmpFddiPORTConnectState mandatory An indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state. T… | column | Enumeration | .1.3.6.1.2.1.10.15.4.2.1.20 |
| snmpFddiPORTPCMState mandatory (refer to SMT 9.6.2). | column | Enumeration | .1.3.6.1.2.1.10.15.4.2.1.21 |
| snmpFddiPORTPCWithhold mandatory PC_Withhold, (refer to ANSI SMT 9.4.1). | column | Enumeration | .1.3.6.1.2.1.10.15.4.2.1.22 |
| snmpFddiPORTLerCondition mandatory This variable is set to true whenever LerEstimate
is less than or equal to LerAlarm. | column | Enumeration | .1.3.6.1.2.1.10.15.4.2.1.23 |
| snmpFddiPORTChipSet mandatory This object identifies the hardware chip(s) which
is (are) principally responsible for the
implementation of the PORT (PHY) function. A few
OBJECT IDENTIFIERS are identified else… | column | ObjectIdentifier | .1.3.6.1.2.1.10.15.4.2.1.24 |
| snmpFddiPORTAction mandatory This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: R… | column | Enumeration | .1.3.6.1.2.1.10.15.4.2.1.25 |
| snmpFddiPORTPCType mandatory PC_Type (refer to ANSI SMT 9.2.2 and ANSI SMT
9.6.3.2). | column | Enumeration | .1.3.6.1.2.1.10.15.4.2.1.3 |
| snmpFddiPORTPCNeighbor mandatory The type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2) (refer
to ANSI SMT 9.6.3.2). | column | Enumeration | .1.3.6.1.2.1.10.15.4.2.1.4 |
| snmpFddiPORTConnectionPolicies mandatory A value that indicates the node's PORT policies.
Pc-MAC-LCT, Pc-MAC-Loop, and Pc-MAC-Placement
indicate … | column | Integer32 | .1.3.6.1.2.1.10.15.4.2.1.5 |
| snmpFddiPORTRemoteMACIndicated mandatory The indication, in PC-Signaling that the remote
partner intends to place a MAC in the output token
PATH of this PORT. Signaled as R_Val (9) (refer
to ANSI SMT 9.6.3.2). | column | Enumeration | .1.3.6.1.2.1.10.15.4.2.1.6 |
| snmpFddiPORTPathsRequested mandatory A value that indicates the desired association(s)
of the port with a station PATH. The 'Primary'
Path is the default. The value of 'Secondary' is
only meaningful for S (slave) o… | column | Integer32 | .1.3.6.1.2.1.10.15.4.2.1.8 |
| snmpFddiPORTMACPlacement mandatory Indicates the upstream MAC, if any, that is
associated with the PORT. The value shall be zero
if there is no MAC associated with the PORT.
Otherwise, the value shall be equal to … | column | FddiResourceId | .1.3.6.1.2.1.10.15.4.2.1.9 |