bufferControlMaxOctetsRequested
RFC1271-MIB ·
.1.3.6.1.2.1.16.8.1.1.8
Object
column
mandatory
r/w
Integer32
The requested maximum number of octets to be
saved in this captureBuffer, including any
implementation-specific overhead. If this variable
is set to -1, the capture buffer will save as many
octets as is possible.
When this object is created or modified, the probe
should set bufferControlMaxOctetsGranted as closely
to this object as is possible for the particular probe
implementation and available resources. However, if
the object has the special value of -1, the probe
must set bufferControlMaxOctetsGranted to -1.
Context
- MIB
- RFC1271-MIB
- OID
.1.3.6.1.2.1.16.8.1.1.8- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- bufferControlEntry
- Table
- bufferControlTable
- Siblings
- 12
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bufferControlIndex mandatory An index that uniquely identifies an entry
in the bufferControl table. The value of this
index shall never be zero. Each such
entry defines one set of packets that is
captured a… | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.1 |
| bufferControlCapturedPackets mandatory The number of packets currently in this captureBuffer. | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.10 |
| bufferControlTurnOnTime mandatory The value of sysUpTime when this capture buffer was
first turned on. | column | RFC1155-SMITimeTicks | .1.3.6.1.2.1.16.8.1.1.11 |
| bufferControlOwner mandatory The entity that configured this entry and is therefore
using the resources assigned to it. | column | - | .1.3.6.1.2.1.16.8.1.1.12 |
| bufferControlStatus mandatory The status of this buffer Control Entry. | column | EntryStatus | .1.3.6.1.2.1.16.8.1.1.13 |
| bufferControlChannelIndex mandatory An index that identifies the channel that is the
source of packets for this bufferControl table.
The channel identified by a particular value of this
index is the same as identifi… | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.2 |
| bufferControlFullStatus mandatory This object shows whether the buffer has room to
accept new packets or if it is full.
If the status is spaceAvailable(1), the buffer is
accepting new packets normal… | column | Enumeration | .1.3.6.1.2.1.16.8.1.1.3 |
| bufferControlFullAction mandatory Controls the action of the buffer when it
reaches the full status. When in the lockWhenFull(1)
state a packet is added to the buffer that
fills the buffer, the bufferControlFullS… | column | Enumeration | .1.3.6.1.2.1.16.8.1.1.4 |
| bufferControlCaptureSliceSize mandatory The maximum number of octets of each packet
that will be saved in this capture buffer.
For example, if a 1500 octet packet is received by
the probe and this object is set to 500, … | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.5 |
| bufferControlDownloadSliceSize mandatory The maximum number of octets of each packet
in this capture buffer that will be returned in
an SNMP retrieval of that packet. For example,
if 500 octets of a packet have been sto… | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.6 |
| bufferControlDownloadOffset mandatory The offset of the first octet of each packet
in this capture buffer that will be returned in
an SNMP retrieval of that packet. For example,
if 500 octets of a packet have been st… | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.7 |
| bufferControlMaxOctetsGranted mandatory The maximum number of octets that can be
saved in this captureBuffer, including overhead.
If this variable is -1, the capture buffer will save
as many octets as possible.
… | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.9 |