bufferControlMaxOctetsGranted
RFC1271-MIB ·
.1.3.6.1.2.1.16.8.1.1.9
Object
column
mandatory
Integer32
The maximum number of octets that can be
saved in this captureBuffer, including overhead.
If this variable is -1, the capture buffer will save
as many octets as possible.
When the bufferControlMaxOctetsRequested object is
created or modified, the probe should set this object
as closely to the requested value as is possible for
the particular probe implementation and available
resources. However, if the request object has the
special value of -1, the probe must set this object
to -1. The probe must not lower this value except
as a result of a modification to the associated
bufferControlMaxOctetsRequested object.
When this maximum number of octets is reached
and a new packet is to be added to this
capture buffer and the corresponding
bufferControlFullAction is set to wrapWhenFull(2),
enough of the oldest packets associated with this
capture buffer shall be deleted by the agent so
that the new packet can be added. If the
corresponding bufferControlFullAction is set to
lockWhenFull(1), the new packet shall be discarded.
In either case, the probe must set
bufferControlFullStatus to full(2).
When the value of this object changes to a value less
than the current value, entries are deleted from
the captureBufferTable associated with this
bufferControlEntry. Enough of the
oldest of these captureBufferEntries shall be
deleted by the agent so that the number of octets
used remains less than or equal to the new value of
this object.
When the value of this object changes to a value greater
than the current value, the number of associated
captureBufferEntries may be allowed to grow.
Context
- MIB
- RFC1271-MIB
- OID
.1.3.6.1.2.1.16.8.1.1.9- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- bufferControlEntry
- Table
- bufferControlTable
- Siblings
- 12
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bufferControlIndex mandatory An index that uniquely identifies an entry
in the bufferControl table. The value of this
index shall never be zero. Each such
entry defines one set of packets that is
captured a… | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.1 |
| bufferControlCapturedPackets mandatory The number of packets currently in this captureBuffer. | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.10 |
| bufferControlTurnOnTime mandatory The value of sysUpTime when this capture buffer was
first turned on. | column | RFC1155-SMITimeTicks | .1.3.6.1.2.1.16.8.1.1.11 |
| bufferControlOwner mandatory The entity that configured this entry and is therefore
using the resources assigned to it. | column | - | .1.3.6.1.2.1.16.8.1.1.12 |
| bufferControlStatus mandatory The status of this buffer Control Entry. | column | EntryStatus | .1.3.6.1.2.1.16.8.1.1.13 |
| bufferControlChannelIndex mandatory An index that identifies the channel that is the
source of packets for this bufferControl table.
The channel identified by a particular value of this
index is the same as identifi… | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.2 |
| bufferControlFullStatus mandatory This object shows whether the buffer has room to
accept new packets or if it is full.
If the status is spaceAvailable(1), the buffer is
accepting new packets normal… | column | Enumeration | .1.3.6.1.2.1.16.8.1.1.3 |
| bufferControlFullAction mandatory Controls the action of the buffer when it
reaches the full status. When in the lockWhenFull(1)
state a packet is added to the buffer that
fills the buffer, the bufferControlFullS… | column | Enumeration | .1.3.6.1.2.1.16.8.1.1.4 |
| bufferControlCaptureSliceSize mandatory The maximum number of octets of each packet
that will be saved in this capture buffer.
For example, if a 1500 octet packet is received by
the probe and this object is set to 500, … | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.5 |
| bufferControlDownloadSliceSize mandatory The maximum number of octets of each packet
in this capture buffer that will be returned in
an SNMP retrieval of that packet. For example,
if 500 octets of a packet have been sto… | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.6 |
| bufferControlDownloadOffset mandatory The offset of the first octet of each packet
in this capture buffer that will be returned in
an SNMP retrieval of that packet. For example,
if 500 octets of a packet have been st… | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.7 |
| bufferControlMaxOctetsRequested mandatory The requested maximum number of octets to be
saved in this captureBuffer, including any
implementation-specific overhead. If this variable
is set to -1, the capture… | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.8 |