ospfIfDesignatedRouter
RFC1253-MIB ·
.1.3.6.1.2.1.14.7.1.13
Object
The IP Address of the Designated Router.
Context
- MIB
- RFC1253-MIB
- OID
.1.3.6.1.2.1.14.7.1.13- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- ospfIfEntry
- Table
- ospfIfTable
- Siblings
- 15
Syntax
RFC1155-SMIIpAddress
- Source
- RFC1155-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ospfIfIpAddress mandatory The IP address of this OSPF interface. | column | RFC1155-SMIIpAddress | .1.3.6.1.2.1.14.7.1.1 |
| ospfIfRtrDeadInterval mandatory The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This va… | column | PositiveInteger | .1.3.6.1.2.1.14.7.1.10 |
| ospfIfPollInterval mandatory The larger time interval, in seconds, between the
Hello packets sent to an inactive non-broadcast multi-
access neighbor. | column | PositiveInteger | .1.3.6.1.2.1.14.7.1.11 |
| ospfIfState mandatory The OSPF Interface State. | column | Enumeration | .1.3.6.1.2.1.14.7.1.12 |
| ospfIfBackupDesignatedRouter mandatory The IP Address of the Backup Designated Router. | column | RFC1155-SMIIpAddress | .1.3.6.1.2.1.14.7.1.14 |
| ospfIfEvents mandatory The number of times this OSPF interface has changed
its state, or an error has occurred. | column | RFC1155-SMICounter | .1.3.6.1.2.1.14.7.1.15 |
| ospfIfAuthKey mandatory The Authentication Key. If the Area's Authorization
Type is simplePassword, and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.
… | column | OctetString | .1.3.6.1.2.1.14.7.1.16 |
| ospfAddressLessIf mandatory For the purpose of easing the instancing of addressed
and addressless interfaces; This variable takes the
value 0 on interfaces with IP Addresses, and the
corresponding value of i… | column | Integer32 | .1.3.6.1.2.1.14.7.1.2 |
| ospfIfAreaId mandatory A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone. | column | AreaID | .1.3.6.1.2.1.14.7.1.3 |
| ospfIfType mandatory The OSPF interface type.
By way of a default, this field may be intuited from
the corresponding value of ifType. Broadcast LANs,
such as Ethernet and IEEE 802.5, t… | column | Enumeration | .1.3.6.1.2.1.14.7.1.4 |
| ospfIfAdminStat mandatory The OSPF interface's administrative status. The value
'enabled' denotes that neighbor relationships may be
formed on the interface, and the interface will be
advertised as an int… | column | Status | .1.3.6.1.2.1.14.7.1.5 |
| ospfIfRtrPriority mandatory The priority of this interface. Used in multi-access
networks, this field is used in the designated router
election algorithm. The value 0 signifies that the
router is not eligi… | column | DesignatedRouterPriority | .1.3.6.1.2.1.14.7.1.6 |
| ospfIfTransitDelay mandatory The estimated number of seconds it takes to transmit a
link- state update packet over this interface. | column | UpToMaxAge | .1.3.6.1.2.1.14.7.1.7 |
| ospfIfRetransInterval mandatory The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database descript… | column | UpToMaxAge | .1.3.6.1.2.1.14.7.1.8 |
| ospfIfHelloInterval mandatory The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for all routers attached to a
common network. | column | HelloRange | .1.3.6.1.2.1.14.7.1.9 |