deviceSrcAddrAgingTime
REPEATER-MIB-2 ·
.1.3.6.1.4.1.52.1.2.1.1.26
Object
scalar
optional
r/w
Integer32
The number of minutes that a source address is not detected before it is removed from the source address table. The minimum is 1 minute and the maximum is 1440 minutes (max minutes in a day).
Context
- MIB
- REPEATER-MIB-2
- OID
.1.3.6.1.4.1.52.1.2.1.1.26- Type
- scalar
- Access
- readwrite
- Status
- optional
- Parent
- device
- Siblings
- 35
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| deviceRecColls optional The number of receive collsions detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.10 |
| deviceAligns optional The number of packets with alignment errors detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.11 |
| deviceCRCs optional The number of packets with bad CRC detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.12 |
| deviceRunts optional The number of runt frames detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.13 |
| deviceOOWColls optional The number of out-of-window collisions detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.14 |
| deviceNoResources optional The number of no resource condtions detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.15 |
| deviceRecBytes optional The number of bytes detected on the network by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.16 |
| deviceGiantFrames optional The number of longer than 1518 byte packets detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.17 |
| deviceRestart mandatory A read will return 0. A set of 0 will restart the device. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.18 |
| deviceResetCounters mandatory A read will return 0.
A set of 0 will reset all the counters for the device, boards and ports. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.19 |
| deviceMMACType mandatory Indicates the type of MMAC. | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.2 |
| deviceRedundantCts optional The number of redundant circuits available for use. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.20 |
| deviceTimeBase optional The number of seconds used as the interval for performing all of the
rate alarm checks. The minimum is 10 secs. There isn't a maximum. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.24 |
| deviceResetRedundancy optional A read will return 0.
A set of a 1 will reset redundancy for the entire box. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.25 |
| deviceSrcAddrTraps optional Controls sending of source address related traps. | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.27 |
| deviceSrcAddrLocked optional A set of 2 will disable all ports that support link status but do not have
link active, or is segmented. The first source address seen on each of the
remaining enabled ports, that… | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.28 |
| deviceEnetBoardMap mandatory The slots that contain Ethernet MIM boards.
This field is bit encoded (e.g. If a bit is set then that board
is present and is an Ethernet MIM.) For example, a value of 3 indicate… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.29 |
| deviceSlots mandatory Number of available slots in this device including the IRM slot. | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.3 |
| deviceTokenRingBoardMap mandatory The slots that contain Token Ring MIM boards.
This field is bit encoded (e.g. If a bit is set then that board
is present and is a Token Ring MIM.) For example, a value of 2 indic… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.30 |
| deviceFDDIBoardMap mandatory The slots that contain FDDI MIM boards.
This field is bit encoded (e.g. If a bit is set then that board
is present and is a FDDI MIM.) For example, a value of 2 indicates
that th… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.31 |
| deviceRestoreDefaults optional A get will return 0.
A set of 0 will restore all of battery backed RAM to factory defaults, with
the execption of the IP address, the community table and the modem
baud rate. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.32 |
| deviceActiveUsers optional The number of active users seen on this device. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.33 |
| deviceOccupiedSlots mandatory The slots that contain MIM boards.
This field is bit encoded (eg. If a bit is set then that board
is present. For example, a value of 3 indicates that there are
boards in the IRM… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.4 |
| deviceBroadPkts optional The sum of all of the broadcast packets detected on all
ports of this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.48 |
| deviceMultPkts optional The sum of all of the multicast packets detected on all
ports of this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.49 |
| devicePortsOn mandatory A read will return the number of adminstratively ON ports for the device.
A write of a 1 will administratively enable all the ports
on the device, except for redundant ports. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.5 |
| deviceThdPartyOccupiedSlots optional The slots that contain Third Party MIM boards. This field
is bit encoded (eg. if a bit is set then that board is present
and is a Third Party MIM.) For example, a value of 4 in… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.51 |
| deviceImimOccupiedSlots optional The slots that contain IMIM boards. This field
is bit encoded (eg. if a bit is set then that board is present and
is an IMIM). For example, a value of 4 indicates that there is… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.52 |
| deviceLinkTraps optional Controls sending of link related traps. | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.54 |
| deviceSegTraps optional Controls sending of seg related traps. | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.55 |
| ctIPDefaultFrameType mandatory Defines the default frame type that will be used by the
device. A device will understand both frame types and will
respond based upon the framing type that is learned for
the giv… | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.56 |
| deviceTotalPorts mandatory The total number of ports in the MMAC. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.6 |
| deviceTotalPkts mandatory The number of packets detected on all ports of this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.7 |
| deviceTotalErrors optional The sum of all alignment, CRC, out-of-window collisions, runt,
and giant errors detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.8 |
| deviceTransmitColls optional The number of transmit collisions detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.9 |