ctIPDefaultFrameType
REPEATER-MIB-2 ·
.1.3.6.1.4.1.52.1.2.1.1.56
Object
scalar
mandatory
r/w
Enumeration
Defines the default frame type that will be used by the
device. A device will understand both frame types and will
respond based upon the framing type that is learned for
the given address. This object defines the type of framing
that will be used if no framing is known, for example ARP
requests.
Setting a value of 8022snap(2) will result in framing
802.3 - 802.2 - IP packets being generated by default.
Setting a value of ethernet(1) will result in framing
ethernet IP packets by default.
Context
- MIB
- REPEATER-MIB-2
- OID
.1.3.6.1.4.1.52.1.2.1.1.56- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- device
- Siblings
- 35
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ethernet |
2 | snap8022 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| deviceRecColls optional The number of receive collsions detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.10 |
| deviceAligns optional The number of packets with alignment errors detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.11 |
| deviceCRCs optional The number of packets with bad CRC detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.12 |
| deviceRunts optional The number of runt frames detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.13 |
| deviceOOWColls optional The number of out-of-window collisions detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.14 |
| deviceNoResources optional The number of no resource condtions detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.15 |
| deviceRecBytes optional The number of bytes detected on the network by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.16 |
| deviceGiantFrames optional The number of longer than 1518 byte packets detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.17 |
| deviceRestart mandatory A read will return 0. A set of 0 will restart the device. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.18 |
| deviceResetCounters mandatory A read will return 0.
A set of 0 will reset all the counters for the device, boards and ports. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.19 |
| deviceMMACType mandatory Indicates the type of MMAC. | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.2 |
| deviceRedundantCts optional The number of redundant circuits available for use. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.20 |
| deviceTimeBase optional The number of seconds used as the interval for performing all of the
rate alarm checks. The minimum is 10 secs. There isn't a maximum. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.24 |
| deviceResetRedundancy optional A read will return 0.
A set of a 1 will reset redundancy for the entire box. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.25 |
| deviceSrcAddrAgingTime optional The number of minutes that a source address is not detected before
it is removed from the source address table. The minimum is 1 minute
and the maximum is 1440 minutes (max minut… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.26 |
| deviceSrcAddrTraps optional Controls sending of source address related traps. | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.27 |
| deviceSrcAddrLocked optional A set of 2 will disable all ports that support link status but do not have
link active, or is segmented. The first source address seen on each of the
remaining enabled ports, that… | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.28 |
| deviceEnetBoardMap mandatory The slots that contain Ethernet MIM boards.
This field is bit encoded (e.g. If a bit is set then that board
is present and is an Ethernet MIM.) For example, a value of 3 indicate… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.29 |
| deviceSlots mandatory Number of available slots in this device including the IRM slot. | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.3 |
| deviceTokenRingBoardMap mandatory The slots that contain Token Ring MIM boards.
This field is bit encoded (e.g. If a bit is set then that board
is present and is a Token Ring MIM.) For example, a value of 2 indic… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.30 |
| deviceFDDIBoardMap mandatory The slots that contain FDDI MIM boards.
This field is bit encoded (e.g. If a bit is set then that board
is present and is a FDDI MIM.) For example, a value of 2 indicates
that th… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.31 |
| deviceRestoreDefaults optional A get will return 0.
A set of 0 will restore all of battery backed RAM to factory defaults, with
the execption of the IP address, the community table and the modem
baud rate. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.32 |
| deviceActiveUsers optional The number of active users seen on this device. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.33 |
| deviceOccupiedSlots mandatory The slots that contain MIM boards.
This field is bit encoded (eg. If a bit is set then that board
is present. For example, a value of 3 indicates that there are
boards in the IRM… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.4 |
| deviceBroadPkts optional The sum of all of the broadcast packets detected on all
ports of this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.48 |
| deviceMultPkts optional The sum of all of the multicast packets detected on all
ports of this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.49 |
| devicePortsOn mandatory A read will return the number of adminstratively ON ports for the device.
A write of a 1 will administratively enable all the ports
on the device, except for redundant ports. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.5 |
| deviceThdPartyOccupiedSlots optional The slots that contain Third Party MIM boards. This field
is bit encoded (eg. if a bit is set then that board is present
and is a Third Party MIM.) For example, a value of 4 in… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.51 |
| deviceImimOccupiedSlots optional The slots that contain IMIM boards. This field
is bit encoded (eg. if a bit is set then that board is present and
is an IMIM). For example, a value of 4 indicates that there is… | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.52 |
| deviceLinkTraps optional Controls sending of link related traps. | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.54 |
| deviceSegTraps optional Controls sending of seg related traps. | scalar | Enumeration | .1.3.6.1.4.1.52.1.2.1.1.55 |
| deviceTotalPorts mandatory The total number of ports in the MMAC. | scalar | Integer32 | .1.3.6.1.4.1.52.1.2.1.1.6 |
| deviceTotalPkts mandatory The number of packets detected on all ports of this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.7 |
| deviceTotalErrors optional The sum of all alignment, CRC, out-of-window collisions, runt,
and giant errors detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.8 |
| deviceTransmitColls optional The number of transmit collisions detected by this device. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.2.1.1.9 |