rdnGateSpecFlags
RDN-PKTCABLE-GROUP-MIB ·
.1.3.6.1.4.1.4981.7.3.1.9
Object
column
Enumeration
autoCommit(1), resources Commit immediately upon reservation. commitNotAllowed(2), CMTS ignores any COMMIT messages for the gate.
Context
- MIB
- RDN-PKTCABLE-GROUP-MIB
- OID
.1.3.6.1.4.1.4981.7.3.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rdnGateSpecEntry
- Table
- rdnGateSpecTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | autoCommit |
2 | commitNotAllowed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rdnGateSpecSessionClass This attribute identifies the proper admission control policy or
parameters to be applied for the gate.
unspecified (255),
normalPriority (1),
highPriority (2). | column | Enumeration | .1.3.6.1.4.1.4981.7.3.1.10 |
| rdnGateSpecDiffServCode This attribute describes Differentiated Services Code Point. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.11 |
| rdnGateSpecT1Timer This attribute describes Gate Transition timer in seconds, the
time limit between authorization and a commit. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.12 |
| rdnGateSpecTokenBuckRate Token Bucket Rate, (r) 32 bit IEEE floating point number used in
Bandwidth Calculations. Specifies the token bucket that the traffic
conforms to. Part of TSpec. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.13 |
| rdnGateSpecBuckSize Token Bucket Size (b) 32 bit IEEE floating point number used in
Bandwidth Calculations. Specifies the token bucket that the traffic
conforms ot. Part of TSpec. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.14 |
| rdnGateSpecPeakDataRate Peak Data Rate (p) 32 bit IEEE floating point number used in
Bandwidth Calculations. Specifies the Peak Data Rate at which
the source sends traffic. Part of TSpec. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.15 |
| rdnGateSpecMinPoliceUnit Minimum Policed Unit (m) 32 bit integer. The smallest packet
size that the source generates, if asmaller packet is sent, it
will count as a packet of size m for the purpose fo p… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.16 |
| rdnGateSpecMaxPacketSize Maximum Packet Size (M) 32 bit integer. Maximum packet size
(including IP and higher layer headers) that are generated by
the source. Part of TSpec. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.17 |
| rdnGateSpecReserveRate Rate (R) 32 bit IEEE floating point integer. The amount of
bandwidth allocated to the flow. Must be greater than or equal
to (r) from the TSpec. Part of RSpec. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.18 |
| rdnGateSlackTerm Slack Term (S) 32 bit integer. Delay Bound part of RSpec. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.19 |
| rdnGateDirection This attribute describes the direction of the gate specification. | column | Enumeration | .1.3.6.1.4.1.4981.7.3.1.2 |
| rdnGateSpecProtocol This attribute describes the Protocol to match in the IP header. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.3 |
| rdnGateSpecSourceIP This attribute describes the source IP V4 address, zero for no
match. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4981.7.3.1.4 |
| rdnGateSpecSourcePort This attribute describes source port. Zero for no match. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.5 |
| rdnGateSpecDestIP This attribute describes the destination IP V4 address, zero for
no match. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4981.7.3.1.6 |
| rdnGateSpecDestPort This attribute describes destination port. Zero for no match. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.7 |
| rdnGateSpecServiceFlowID This attribute describes the service flow ID that maps to the
Gate. This value could be zero if a Gate is viewed prior to a
SFID being assigned to the Gate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.7.3.1.8 |