rdnModemDeregReason
RDN-CMTS-MIB ·
.1.3.6.1.4.1.4981.2.2.9
Object
scalar
Enumeration
Modem Deregistration Reason
normal - the CMTS has lost contact with the modem.
operatorReset - reset by the operator
operatorDisabled - operator has disabled the modem
operatorDeleted - was removed from the system
transmissionFailed - the transmitter communicating to the modem
has failed
transmissionDisabled - the transmitter communicating to the modem
has been disabled
transmissionDeleted - the transmitter communicating to the modem
has been deleted
servingGroupChanged - the assignment of the serving groups for the
modem has changed
receiverFailed - the receiver communicating with the modem has
failed
receiverDisabled - the receiver communicating with the modem has
been disabled
receiverDeleted - the receiver communicating with the modem has
beeb deleted
channelDeleted - a channel has changed on the receiver that has
caused the modem to deregister
channelErrors - deregistered due to unacceptable amount of channel
errors
incompleteReg - deregistered due to incomplete registration
profileUpdateComplete - deregistered after profile update
skeyFailure - deregistered due to session key failure
dnChanChangeFailure - due to downstream transmission channel change failure
noDeregReason - no deregistration reason available
powerTolerance - power ranging corrections were out of tolerance
freqTolerance - frequency ranging corrections were out of tolerance
timingTolerance - timing ranging correction were out of tolerance
rangingTolerance - multiple ranging corrections were out of tolerance
noResponseUCC - modem did not respond to the UCC request
This is a place holder for the modem deregistration reason. This should
return ZERO when read. This just allows us to include a deregistration
reason in the modem deregistration trap varbind.
Context
- MIB
- RDN-CMTS-MIB
- OID
.1.3.6.1.4.1.4981.2.2.9- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- rdnCmtsMiscObjects
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | normal |
2 | operatorReset |
3 | operatorDisabled |
4 | operatorDeleted |
5 | transmissionFailed |
6 | transmissionDisabled |
7 | transmissionDeleted |
8 | servingGroupChanged |
9 | receiverFailed |
10 | receiverDisabled |
11 | receiverDeleted |
12 | channelDeleted |
13 | channelErrors |
14 | incompleteReg |
15 | profileUpdateComplete |
16 | skeyFailure |
17 | dnChanChangeFailure |
18 | noDeregReason |
19 | powerTolerance |
20 | freqTolerance |
21 | timingTolerance |
22 | rangingTolerance |
23 | noResponseUCC |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rdnCmtsSaveConfig This object when set to TRUE will save the current configuration of
the CMTS. When this object is read it will return FALSE | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4981.2.2.1 |
| rdnModemRegIndex This is place holder for CMId which is the index to the CM table.
This table WILL contain the CM information. Right now the table is
not implemented yet. When read it returns ZERO… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4981.2.2.11 |
| rdnCmToCpeTable This table provides the information about the CPEs attached to the
CM. | table | - | .1.3.6.1.4.1.4981.2.2.12 |
| rdnCmtsCmRegisteredTrapEnable This object controls SNMP traps for CM registration
and deregistration traps (rdnCmtsCmRegisteredNotification
and rdnCmtsCmDeregisteredNotification).
If its value is set to enabl… | scalar | Enumeration | .1.3.6.1.4.1.4981.2.2.13 |
| rdnCmtsCardType This object toggles the CMTS card type between Domestic
and Japan. When set to Japan card type, upstream
frequency range of the CMTS card will change from 10MHz
to 55MHz. Downs… | scalar | Enumeration | .1.3.6.1.4.1.4981.2.2.14 |
| rdnRQueryCmtsCmStatusTable The Remote Query feature allows the BSR to act as an SNMP Manager,
periodically collecting statistics from cable modems, using SNMP
get/next requests. The rdnRQueryCmtsCmStatusT… | table | - | .1.3.6.1.4.1.4981.2.2.15 |
| rdnUgsStatsWindow The sliding, sampling time window to collect statistics
for the rdnServiceClassStatsTable. This timer interval
is global, applying to all service classes and
chassis slots. A va… | scalar | minutes Integer32 | .1.3.6.1.4.1.4981.2.2.16 |
| rdnCableUgsStatsTable This table contains statistics summarizing UGS flows
per CMTS slot/port on the BSR. | table | - | .1.3.6.1.4.1.4981.2.2.17 |
| rdnServiceClassStatsTable This table contains statistics summarizing
non-bonded flows within Service Classes on the BSR. | table | - | .1.3.6.1.4.1.4981.2.2.18 |
| rdnCmtsServiceClassObjects | node | - | .1.3.6.1.4.1.4981.2.2.19 |
| rdnCmtsCmResetByMacAddr The CM MAC address that the operator wants to reset. When this object
is set, it will cause the CMTS to reset that CM. When this object is
read it will return zero | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4981.2.2.2 |
| rdnRQueryCmtsCmStatusExtTable This is an extension of the rdnRQueryCmtsCmStatusTable. | table | - | .1.3.6.1.4.1.4981.2.2.20 |
| rdnIfCmtsCmTable This table is an extension of the docsIfCmtsCmTable. It
provides additional information about the CM. | table | - | .1.3.6.1.4.1.4981.2.2.21 |
| rdnIfCmtsMTAOnlyStatusTable A set of objects in the CMTS, maintained for each
MTA ONLY connected to this CMTS. | table | - | .1.3.6.1.4.1.4981.2.2.23 |
| rdnServiceClassBondingStatsTable This table contains statistics summarizing flows
within Service Classes for bonded upstreams and downstreams
on the BSR. For non-bonded upstream/downstream stats,
please refer … | table | - | .1.3.6.1.4.1.4981.2.2.24 |
| rdnCmtsCmResetByIpv6Addr The CM IPv6 address that the operator wants to reset. When this object
Is set, it will cause the CMTS to reset that CM. When this object is
Read it will return zero | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.4981.2.2.25 |
| rdnCableInterceptScalars | node | - | .1.3.6.1.4.1.4981.2.2.26 |
| rdnCableInterceptTable This table provides the information about the configured cable
intercepts | table | - | .1.3.6.1.4.1.4981.2.2.27 |
| rdnCmtsUpChannelCounterTable This table contains 32 bit and 64 bit
IUC-1 Noise and NoEnergy mini-slots counters
for upstream channels. | table | - | .1.3.6.1.4.1.4981.2.2.28 |
| rdnCmtsCmResetByIpAddr The CM IP address that the operator wants to reset. When this object
is set, it will cause the CMTS to reset that CM. When this object is
read it will return zero | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4981.2.2.3 |
| rdnCmtsCmResetAll This object when set to TRUE will cause the CMTS to reset all the CM that
are registered with this CMTS. When this object is read it will return
FALSE | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4981.2.2.4 |
| rdnCmtsHostAuthControl obsolete This object is used to add or delete entry in CMTS host authorization
table. The first octet is for action, add (1) or delete (2), the rest
are composed with CM MAC address (6 oct… | scalar | OctetString | .1.3.6.1.4.1.4981.2.2.5 |
| rdnCmtsModemAgingTimer The Time in minutes of modem inactivity after which the modem is
deleted from the registration table. The minimum is 10 minutes
and the maximum is 21 days. A value of '0' will dis… | scalar | Integer32 | .1.3.6.1.4.1.4981.2.2.6 |
| rdnCmtsCpeToCmObject | node | - | .1.3.6.1.4.1.4981.2.2.7 |
| rdnIfCmtsCmStatusTable This table is an extension of the docsIfCmtsCmStatusTable.
It provides additional information about the CM. | table | - | .1.3.6.1.4.1.4981.2.2.8 |