rdnSpectrumGroupReferenceCMExclusion

RDN-CABLE-SPECTRUM-GROUP-MIB · .1.3.6.1.4.1.4981.6.1.2.1.1.26

Object

column r/w Unsigned32

This parameter defines the number of low SNR modem(s),
on each upstream in the spectrum-group, not allowed to be
used for channel assessment.  This parameter has no effect 
when the number of registered modems on a specific upstream 
is less than double the configured value.

Context

MIB: RDN-CABLE-SPECTRUM-GROUP-MIB
OID: .1.3.6.1.4.1.4981.6.1.2.1.1.26
Type: column
Access: readwrite
Status: current
Parent: rdnSpectrumGroupEntry
Table: rdnSpectrumGroupTable
Siblings: 25

Syntax

Unsigned32

Values & Constraints

Object Constraints

range: 0-45

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rdnSpectrumGroupName The text name (index) of the spectrum group.	column	OctetString	`.1.3.6.1.4.1.4981.6.1.2.1.1.1`
rdnSpectrumGroupRowStatus Controls and reflects the status of rows in this table. This field is used to control the addition and deletion of a spectrum group.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.4981.6.1.2.1.1.10`
rdnSpectrumOfflineModemCount Number of offline modems for this spectrum group	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.4981.6.1.2.1.1.11`
rdnSpectrumOnlineModemCount Number of online modems for this spectrum group	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.4981.6.1.2.1.1.12`
rdnSpectrumActiveModemCount Number of active modems for this spectrum group	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.4981.6.1.2.1.1.13`
rdnSpectrumRegisteredModemCount Number of registered modems for this spectrum group	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.4981.6.1.2.1.1.14`
rdnSpectrumProvisionedModemCount Number of provisioned modems for this spectrum group	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.4981.6.1.2.1.1.15`
rdnSpectrumUnregisteredModemCount Number of Unregistered modems for this spectrum group	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.4981.6.1.2.1.1.16`
rdnSpectrumGroupUnerroreds Codewords received on this spectrum group without error. This includes all codewords, whether or not they were part of frames destined for this device.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4981.6.1.2.1.1.17`
rdnSpectrumGroupCorrecteds Codewords received on this spectrum group with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4981.6.1.2.1.1.18`
rdnSpectrumGroupUncorrectables Codewords received on this spectrum group with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4981.6.1.2.1.1.19`
rdnSpectrumGroupId The number index for the spectrum group.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4981.6.1.2.1.1.2`
rdnSpectrumGroupStaticLoadBalEnable This field controls the Static Load Balancing feature. This parameter applies to all CMTS card types.	column	Enumeration	`.1.3.6.1.4.1.4981.6.1.2.1.1.20`
rdnSpectrumGroupLoadBalance Setting this object to TRUE performs a Static Load Balancing for the spectrum group. Reading this object always returns FALSE.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4981.6.1.2.1.1.21`
rdnSpectrumGroupActiveChannelSamplingPeriod The signal quality of the active channel is periodically measured for SNR. This object is the time between two consecutive signal quality measurements of the active channel. …	column	Unsigned32	`.1.3.6.1.4.1.4981.6.1.2.1.1.22`
rdnSpectrumGroupHopRollbackChannelSamplingPeriod When a primary channel is swapped with the spare channel, if the rollback is configured, the primary channel is periodically measured for signal quality in the background using …	column	Unsigned32	`.1.3.6.1.4.1.4981.6.1.2.1.1.23`
rdnSpectrumGroupHopSpareChannelSamplingPeriod If a primary channel could not be swapped for noise avoidance with a spare channel, due to poor signal quality of the spare channels, the spare channels are periodically assesse…	column	Unsigned32	`.1.3.6.1.4.1.4981.6.1.2.1.1.24`
rdnSpectrumGroupSnrHysteresisValue SNR hysteresis (a default hysteresis of 2dB) is used to determine the SNR threshold for the downward transition from upper modulation type to a lower modulation type. The hyster…	column	Unsigned32	`.1.3.6.1.4.1.4981.6.1.2.1.1.25`
rdnSpectrumGroupHopPeriod The rate at which the frequency hop takes place. This would be useful in preventing excessive hops. Unit is in second. This parameter applies only to CMTS 1x8 and 1…	column	Unsigned32	`.1.3.6.1.4.1.4981.6.1.2.1.1.3`
rdnSpectrumGroupHopThresholdFlap The CM flap rate percentage threshold that controls the hopping frequency. The hopping only happens when the percentage of flap CMs is higher than this threshold. Value 0 means …	column	Unsigned32	`.1.3.6.1.4.1.4981.6.1.2.1.1.4`
rdnSpectrumGroupHopThresholdError The FEC error rate percentage threshold that controls the hopping frequency. The hopping only happens when the error rate percentage is higher than this threshold. The unit is 1/…	column	Unsigned32	`.1.3.6.1.4.1.4981.6.1.2.1.1.5`
rdnSpectrumGroupHopRollbackEnable This field controls the spectrum rollback option when the original channel quality recovers. The rollback is allowed when this field is enabled. The rollback is not allowed when t…	column	Enumeration	`.1.3.6.1.4.1.4981.6.1.2.1.1.6`
rdnSpectrumDataCollectResolution The spectrum data collection resolution, in Hz. This parameter applies to all CMTS card types.	column	Unsigned32	`.1.3.6.1.4.1.4981.6.1.2.1.1.7`
rdnSpectrumDataCollectInterval The spectrum data collection interval, in second. Minimum value 60 seconds. Value 0 means the collection is disabled. This parameter applies to all CMTS card types.	column	Unsigned32	`.1.3.6.1.4.1.4981.6.1.2.1.1.8`
rdnSpectrumGroupGuardBand The minimum spectrum separation between upstream channels in the same spectrum group, in Hz. This parameter applies to CMTS 1x8 and 1x4 cards.	column	Unsigned32	`.1.3.6.1.4.1.4981.6.1.2.1.1.9`