rdnCableSnrLoopTestCenterFrequency
RDN-CABLE-SPECTRUM-GROUP-MIB ·
.1.3.6.1.4.1.4981.6.1.2.10.7.1.2
Object
column
r/w
hertz Integer32
The center frequency from 5 MHZ to 42
MHZ for North American standard, or 65 MHz for European
standard.
If value 0 is retrieved for GET operation, it indicates this parameter
has never been set. Value 0 is not allowed for SET operation.
Context
- MIB
- RDN-CABLE-SPECTRUM-GROUP-MIB
- OID
.1.3.6.1.4.1.4981.6.1.2.10.7.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Units
- hertz
- Parent
- rdnCableSnrLoopTestEntry
- Table
- rdnCableSnrLoopTestTable
- Siblings
- 7
Syntax
hertz Integer32
Values & Constraints
Object Constraints
range: 0-0
range: 5000000-65000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rdnCableSnrLoopTestLoopCount Number of times to repeat SNR measurements, using a configuration
as specified by the rdnCableSnrLoopTestTable.
A value of 0 is read-only, and means that the loop t… | column | Integer32 | .1.3.6.1.4.1.4981.6.1.2.10.7.1.1 |
| rdnCableSnrLoopTestChannelWidth The spectrum channel width that the SNR tests will be evaluated.
If value 0 is retrieved for GET operation, it indicates this parameter
has never been set. Value 0 is not allowed … | column | Enumeration | .1.3.6.1.4.1.4981.6.1.2.10.7.1.3 |
| rdnCableSnrLoopTestCmMac MAC address of the reference modem to be used for this SNR
loop test. If left to default, then a CM will be selected from
a pool of registered CMs on this ifIndex. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4981.6.1.2.10.7.1.4 |
| rdnCableSnrLoopTestIngressCancellation Indicates whether ingress cancellation will be used for this SNR test. | column | Enumeration | .1.3.6.1.4.1.4981.6.1.2.10.7.1.5 |
| rdnCableSnrLoopTestEqualization Indicates whether equalization will be used for this SNR test. | column | Enumeration | .1.3.6.1.4.1.4981.6.1.2.10.7.1.6 |
| rdnCableSnrLoopTestDataPattern Data pattern to use for the SNR loop measurements. | column | Enumeration | .1.3.6.1.4.1.4981.6.1.2.10.7.1.7 |
| rdnCableSnrLoopStart Setting this object to true(1) causes repeated SNR measurements,
with a loop count as indicated by rdnCableSnrLoopTestLoopCount,
and using a configuration as specified by the othe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4981.6.1.2.10.7.1.8 |