rcVlanPortClassificationPrec
RC-VLAN-MIB ·
.1.3.6.1.4.1.2272.1.3.3.1.20
Object
column
r/w
Enumeration
Sets the precedence for vlan classification. A value of 1 puts classification of packets to source mac vlans ahead of subnet based vlans. A value of 2 puts subnet based vlans ahead of source mac vlans. Classification to other types of vlans is unaffected as it occurs following source mac and subnet based vlans.
Context
- MIB
- RC-VLAN-MIB
- OID
.1.3.6.1.4.1.2272.1.3.3.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcVlanPortEntry
- Table
- rcVlanPortTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | sourceMac |
2 | subnet |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcVlanPortIndex An unique index used to identify a particular
port in the system. This index is equal to the
ifIndex of the port. | column | Integer32 | .1.3.6.1.4.1.2272.1.3.3.1.1 |
| rcVlanPortLoopDetect Enable/disable loop detection on this port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.3.1.10 |
| rcVlanPortFirstPortInOpid This value gives the IfIndex of the first port in the
octapid. This value is used to generate an error message
when changing port type from normal to uni/nni and
viceversa | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.3.3.1.11 |
| rcVlanPortLastPortInOpid This value gives the IfIndex of the first port in the
octapid. This value is used to generate an error message
when changing port type from normal to uni/nni and
viceversa | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.3.3.1.12 |
| rcVlanPortUntagDefaultVlan enable/disable Egress Tagging on the Default Vlan
of the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.3.1.13 |
| rcVlanPortLoopDetectAction This value is used to specify the action which needs to be
taken once a loop is detected on a specific port. | column | Enumeration | .1.3.6.1.4.1.2272.1.3.3.1.14 |
| rcVlanPortArpDetect Enable/disable Arp detection on this port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.3.1.15 |
| rcVlanPortSpoofDetect Enable/disable spoof detection on this port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.3.1.16 |
| rcVlanPortRemarking Enable/disable remarking on this port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.3.1.17 |
| rcVlanPortClassificationSubnet Enable/disable Subnet based Vlan packets on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.3.1.18 |
| rcVlanPortClassificationProtocol Enable/disable Protocol based Vlan packets on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.3.1.19 |
| rcVlanPortNumVlanIds Used to indicate the number of VLAN IDs that
are stored in the rcVlanPortVlanIds variable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.3.3.1.2 |
| rcVlanPortVlanIdList This bitfield is used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a bit.
The most-significant (left-most) bit represents Vla… | column | OctetString | .1.3.6.1.4.1.2272.1.3.3.1.21 |
| rcVlanPortClassificationSourceMac Enable/disable SourceMac based Vlan packets on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.3.1.22 |
| rcVlanPortPrivateVlanPortType The type of port associated wiht private VLAN.
If the VLAN is not private then this is ignored.
If the VLAN is private then the value must be
either trunk, isolated, or promiscuou… | column | Enumeration | .1.3.6.1.4.1.2272.1.3.3.1.23 |
| rcVlanPortUntaggedVlanIds This object is used to identify which VLANs this port
is associated with as untagged. | column | RcVlanMask | .1.3.6.1.4.1.2272.1.3.3.1.24 |
| rcVlanPortTaggedVlanIds This object is used to identify which VLANs this port
is associated with as tagged. | column | RcVlanMask | .1.3.6.1.4.1.2272.1.3.3.1.25 |
| rcVlanPortOrigin Describes if port vlan configuration is done by
ZTF(Auto-Sense), CLI/SNMP or other. | column | Enumeration | .1.3.6.1.4.1.2272.1.3.3.1.26 |
| rcVlanPortVlanIds An array used to identify which VLANs this port
is assigned to. Each VLAN ID is stored as a two
octet value. The first octet in the pair holds
bits 15-8 of the VLAN ID, while th… | column | OctetString | .1.3.6.1.4.1.2272.1.3.3.1.3 |
| rcVlanPortType The type of port: access(1) or trunk(2). | column | Enumeration | .1.3.6.1.4.1.2272.1.3.3.1.4 |
| rcVlanPortDiscardTaggedFrames A flag used to determine how to process tagged
frames received on this access port. When the
flag is set, these frames are discarded by the
forwarding process. When the flag is r… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.3.1.5 |
| rcVlanPortDiscardUntaggedFrames A flag used to determine how to process untagged
frames received on this trunk port. When the flag
is set, these frames are discarded by the
forwarding process. When the flag is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.3.1.6 |
| rcVlanPortDefaultVlanId The VLAN ID assigned to untagged frames received
on this trunk port.
This field is meaningless when the port is not
a trunk port. | column | Integer32 | .1.3.6.1.4.1.2272.1.3.3.1.7 |
| rcVlanPortPerformTagging Enable/disable the port on the current vlan to
perform tagging on the incoming and outgoing traffic.
For tagPvidOnly and untagPvidOnly values the port is
tagged or untagged only … | column | Enumeration | .1.3.6.1.4.1.2272.1.3.3.1.8 |
| rcVlanPortSVlanPortType The type of port. | column | Enumeration | .1.3.6.1.4.1.2272.1.3.3.1.9 |