rcBanDhRingBanPortType
RC-TLS-MIB ·
.1.3.6.1.4.1.2272.1.42.4.1.2
Object
column
r/w
Enumeration
Primary/Secondary BAN port type
Context
- MIB
- RC-TLS-MIB
- OID
.1.3.6.1.4.1.2272.1.42.4.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcBanDhRingEntry
- Table
- rcBanDhRingTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | primary |
2 | secondary |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcBanDhRingId BAN Dual Home Ring ID. | column | Integer32 | .1.3.6.1.4.1.2272.1.42.4.1.1 |
| rcBanDhRingOperState BAN Dual Home Ring operation status. | column | Enumeration | .1.3.6.1.4.1.2272.1.42.4.1.10 |
| rcBanDhRingName Modification of this field is allowed only
when the admin state is disabled. | column | OctetString | .1.3.6.1.4.1.2272.1.42.4.1.11 |
| rcBanDhRingDiscoverInterval The time interval between discovery messages that are
generated to check for ring module existence. | column | seconds Integer32 | .1.3.6.1.4.1.2272.1.42.4.1.12 |
| rcBanDhRingRowStatus Uses for controlling the creation and
deletion of this row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.42.4.1.13 |
| rcBanDhRingNumVlanIds Used to indicate the number of VLAN IDs that
are stored in the rcBanRingVlanIds variable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.42.4.1.14 |
| rcBanDhRingVlanIds An array used to identify which VLANs this Ring
is associated with. Each VLAN ID is stored as a
two octet value. The first octet in the pair holds
bits 15-8 of the VLAN ID, whi… | column | OctetString | .1.3.6.1.4.1.2272.1.42.4.1.15 |
| rcBanDhRingRrpHello RRP hello enable or disable a BAN Ring. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.42.4.1.16 |
| rcBanDhRingRrpHelloInterval The time interval between hello messages that are
generated to the ESU. | column | milliseconds Integer32 | .1.3.6.1.4.1.2272.1.42.4.1.17 |
| rcBanDhRingClearRrpStats To clear the RRP sending/receiving and missing
hello message counter | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.42.4.1.18 |
| rcBanDhRingClearRdpStats To clear the RDP sending/receiving message counter | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.42.4.1.19 |
| rcBanDhRingNumOfUni Used to indicate the number of UNIs this ring
is assigned to | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.42.4.1.20 |
| rcBanDhRingPort BAN Dual Home Ring primaray port number. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.42.4.1.3 |
| rcBanDhRingPartnerPortMac BAN Dual Home Ring Partner/other port MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.42.4.1.4 |
| rcBanDhRingIbtPort Single link Inter BAN Trunk port number. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.42.4.1.5 |
| rcBanDhRingIbtMlt Multi-link Inter BAN Trunk MLT interface ID | column | Integer32 | .1.3.6.1.4.1.2272.1.42.4.1.6 |
| rcBanDhRingIbtVid BAN Dual Home Ring IBT port VID number. | column | Integer32 | .1.3.6.1.4.1.2272.1.42.4.1.7 |
| rcBanDhRingAdminState Administratively enable or disable a BAN Dual Home Ring. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.42.4.1.8 |
| rcBanDhRingTxTimer BAN Dual Home Ring TX timer value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.42.4.1.9 |