rcIpv6RipngExpRoutePolicy
RC-RIP-MIB ·
.1.3.6.1.4.1.2272.1.10.5.1.4.1.8
Object
column
SNMPv2-SMIInteger32
Its purpose is to serve as an additional
index that may delineate between multiple entries to
the same destination. The value { 0 } shall be used
as the default value for this object.
Context
- MIB
- RC-RIP-MIB
- OID
.1.3.6.1.4.1.2272.1.10.5.1.4.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rcIpv6RipngExpRouteEntry
- Table
- rcIpv6RipngExpRouteTable
- Siblings
- 14
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpv6RipngExpRouteDest The destination IPv6 address of this route.
This object may not take a Multicast address
value. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2272.1.10.5.1.4.1.1 |
| rcIpv6RipngExpRouteNextHopRDI The Routing Domain ID of the Next Hop.
The semantics of this object are determined by
the routing-protocol specified in the route's
rcIpv6RipngExpRouteProtocol value.
When this… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.10.5.1.4.1.10 |
| rcIpv6RipngExpRouteMetric The routing metric for this route. The
semantics of this metric are determined by the
routing protocol specified in the route's
rcIpv6RipngExpRouteProtocol value. In this case,
wh… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.10.5.1.4.1.11 |
| rcIpv6RipngExpRouteWeight The system internal weight value for this route.
The semantics of this value are determined by
the implementation specific rules. Generally,
within routes with the same rcIpv6Ripn… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.10.5.1.4.1.12 |
| rcIpv6RipngExpRouteInfo A reference to MIB definitions specific to the
particular routing protocol which is responsible
for this route, as determined by the value
specified in the route's ipv6RouteProt… | column | ObjectIdentifier | .1.3.6.1.4.1.2272.1.10.5.1.4.1.13 |
| rcIpv6RipngExpRouteValid Setting this object to the value 'false(2)' has
the effect of invalidating the corresponding entry
in the rcIpv6RipngExpRouteTable object. That is, it
effectively disassociates th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.10.5.1.4.1.14 |
| rcIpv6RipngExpRoutePref Used to indicate the route preference of this
entry. If there are more than one route that can
be used to forward IPv6 traffic, the route that has
a lower preference will be used… | column | Integer32 | .1.3.6.1.4.1.2272.1.10.5.1.4.1.15 |
| rcIpv6RipngExpRoutePfxLength Indicates the prefix length of the destination
address. | column | bits Integer32 | .1.3.6.1.4.1.2272.1.10.5.1.4.1.2 |
| rcIpv6RipngExpRouteIndex The value which uniquely identifies the route
among the routes to the same network layer
destination. The way this value is chosen is
implementation specific but it must be uniqu… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.10.5.1.4.1.3 |
| rcIpv6RipngExpRouteIfIndex Indicates the interface index where the route was learned from | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.10.5.1.4.1.4 |
| rcIpv6RipngExpRouteNextHop Identifier of the next-hop, IPv6 address. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2272.1.10.5.1.4.1.5 |
| rcIpv6RipngExpRouteType The type of route. Note that local(3) refers to a
route for which the next hop is the final destination;
remote(4) refers to a route for which the next hop is
not the final desti… | column | Enumeration | .1.3.6.1.4.1.2272.1.10.5.1.4.1.6 |
| rcIpv6RipngExpRouteProtocol The routing mechanism via which this route was learned. | column | Enumeration | .1.3.6.1.4.1.2272.1.10.5.1.4.1.7 |
| rcIpv6RipngExpRouteAge The number of seconds since this route was last updated
or otherwise determined to be correct. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.10.5.1.4.1.9 |