rcPrFilterAclName
RC-POWER-RANGER-MIB ·
.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.3
Object
column
r/w
OctetString
A descriptive name chosen by the administrator for the Acl Entry.
Context
- MIB
- RC-POWER-RANGER-MIB
- OID
.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcPrFilterAclEntry
- Table
- rcPrFilterAclTable
- Siblings
- 20
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcPrFilterAclId A unique identifier for Acl entry in the range
of Table Size. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.1 |
| rcPrFilterAclPortList Indicates the ports to be added to this Acl Entry. | column | RAPID-CITYPortSet | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.10 |
| rcPrFilterAclRowStatus Create/delete operations for the entry. Deleting
a non-empty Acl results in deletion of member Aces
and then the Acl. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.11 |
| rcPrFilterAclNumVlanIds Used to Indicate the number of VLAN ID's that
are stored in the rcPrFilterAclVlanList. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.12 |
| rcPrFilterAclPktType Indicates the packet type that this ACL is applicable to.
VSP9k introduced nonipv6(3) to replace the ipv4(1) in release
VSP 3.4.0.0. It means that ipv4(1) i snot applicable to VSP… | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.13 |
| rcPrFilterAclControlPktRule When the rcPrFilterAclDefaultAction object is set
to deny then control packets follow this rule.
Otherwise, the object value can be ignored. | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.14 |
| rcPrFilterAclVlanId Destination Vlan Id for mirroring the packets.
The value 0 means no vlan is being mirrored.
When the value of rcPrFilterAclVlanId is non-zero,
the values of rcPrFilterAclMltId and… | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.15 |
| rcPrFilterAclMltId Destination Mlt Id for mirroring the packets.
The value 0 means no mlt is being mirrored.
When the value of rcPrFilterAclMltId is non-zero,
the values of rcPrFilterAclVlanId and
r… | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.16 |
| rcPrFilterAclDstPortList Destination Port List for mirroring the packets.
The value 0 means no port(s) is being mirrored.
When the value of rcPrFilterAclDstPortList is non-zero, th… | column | RAPID-CITYPortSet | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.17 |
| rcPrFilterAclIpfixState Value indicating whether ipfix option on the
Acl is enabled. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.18 |
| rcPrFilterAclMatchType Indicates the match type that the traffic is
ingress on UNI or terminated NNI or both | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.19 |
| rcPrFilterAclActId A unique identifier for Act entry in the range
of Table Size. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.2 |
| rcPrFilterAclIsid For IP shortcut, I-SID is zero. For L3 vsn, Inter
I-SID routing, I-SID is configured I-SID value
ie other than zero. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.20 |
| rcPrFilterAclOrigin Indicates how the ACL was created.
Supported values:
config - ACL created by user
eap - ACL created by EAP via Radius response | column | Bits | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.21 |
| rcPrFilterAclType An Acl can be vlan-based or port-based. An Ace
has a capability to match packets classified as
'ingress' and 'egress'. An ingress packet is
assigned a value 'in' and an egress … | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.4 |
| rcPrFilterAclAceListSize Indicates the number of Aces in a particular Acl. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.5 |
| rcPrFilterAclDefaultAction Indicates action to be taken when none of the
Aces in the Acl match. | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.6 |
| rcPrFilterAclGlobalAction Indicates action is applied to all Aces that
match in an Acl. | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.7 |
| rcPrFilterAclState Enables/Disables the state of all Aces in the Acl | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.8 |
| rcPrFilterAclVlanList An array used to indicate all the VLANs to be
associated with this Acl Entry. At present, only 4k
Vlans are supported. | column | OctetString | .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.9 |