rcIpConfSpbMulticastQuerierAddr
RC-IP-MIB ·
.1.3.6.1.4.1.2272.1.8.1.1.1.28
Object
querier-addr for spb-multicast
Context
- MIB
- RC-IP-MIB
- OID
.1.3.6.1.4.1.2272.1.8.1.1.1.28- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIpConfEntry
- Table
- rcIpConfTable
- Siblings
- 31
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpConfIfIndex An unique value to identify a physical interface
or a logical interface (VLAN). | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2272.1.8.1.1.1.1 |
| rcIpConfTriggeredUpdateEnable Used to indicate whether the RIP triggered update
feature should be enabled on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.10 |
| rcIpConfAutoAggrerateEnable Used to indicate whether the auto aggregation
feature should be enabled on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.11 |
| rcIpConfGenerateDefaultRoute Used to indicate whether to generate a default
RIP route on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.12 |
| rcIpConfAdvertiseWhenDown The value is used indicated whether vlan state change
should be notified to layer 3 or not, provided the vlan
is configured as routable interface. Also used for
single routable po… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.13 |
| rcIpConfDirectBroadcastEnable Used to indicate whether this interface should
forward direct broadcast traffic | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.14 |
| rcIpConfRipInPolicy Used to indicate whether this interface should
advertize a RIP default route. | column | OctetString | .1.3.6.1.4.1.2272.1.8.1.1.1.15 |
| rcIpConfRipOutPolicy Used to indicate whether this interface should
accept a RIP default route. | column | OctetString | .1.3.6.1.4.1.2272.1.8.1.1.1.16 |
| rcIpConfOspfIfType OSPF Interface Type. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.1.1.1.17 |
| rcIpConfRipCost Used to indicate the rip cost for this interface. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.1.1.1.18 |
| rcIpConfRipHolddown Used to indicate the rip holddown timer for this
interface | column | Integer32 | .1.3.6.1.4.1.2272.1.8.1.1.1.19 |
| rcIpConfAdvertDefRte Used to indicate whether this interface should
advertize a RIP default route. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.2 |
| rcIpConfRipTimeout Used to indicate the rip timeout interval for this
interface | column | Integer32 | .1.3.6.1.4.1.2272.1.8.1.1.1.20 |
| rcIpConfRsmltEnable Used to enable Route Smlt feature. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.21 |
| rcIpConfReversePathCheckEnable Used to indicate whether this interface should
perform Reverse Path Check | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.22 |
| rcIpConfReversePathCheckMode Reverse Path Checking mode. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.1.1.1.23 |
| rcIpConfIsisEnable Enable/disable Isis on this IP interface | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.24 |
| rcIpConfBfdEnable Enable or disable BFD on the specified
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.25 |
| rcIpConfIpVpnLiteEnable Enable or disable ipvpn-lite capability on the specified
circuitless ip interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.26 |
| rcIpConfSpbMulticastEnable Enable or disable spb-multicast on this port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.27 |
| rcIpConfVrrpVersion Set the VRRP version for IPv4 on the specified
interface. It does not impact the use of IPv6 VRRPv3 | column | Enumeration | .1.3.6.1.4.1.2272.1.8.1.1.1.29 |
| rcIpConfAcceptDefRte Used to indicate whether this interface should
accept a RIP default route. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.3 |
| rcIpConfPimGatewayEnable Enable/disable PIM Gateway on this interface | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.30 |
| rcIpConfVrrpChkSumComputation Set the IPv4 VRRPv3 checksum computation method on the specified
interface. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.1.1.1.31 |
| rcIpConfIpsecEnable Used to indicate whether IPSec is enabled or disabled on the interface | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.32 |
| rcIpConfRowStatus Row status for this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.8.1.1.1.4 |
| rcIpConfRipEnable Enable or disable RIP routing on the specified
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.5 |
| rcIpConfOspfEnable Enable or disable OSPF routing on the specified
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.6 |
| rcIpConfIgmpEnable Enable or disable IGMP on the specified
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.7 |
| rcIpConfAddrAssigned Indicate whether IpAddress has been assigned
for this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.8 |
| rcIpConfDhcpEnable Enable or disable DHCP on the specified
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.1.1.9 |