rcIpBgpPeerGroupIpv6Cap
RC-IP-BGP-MIB ·
.1.3.6.1.4.1.2272.1.8.101.11.1.36
Object
The ipv6 capability can be enabled or disabled on the bgp neighbor peer group.
Context
- MIB
- RC-IP-BGP-MIB
- OID
.1.3.6.1.4.1.2272.1.8.101.11.1.36- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIpBgpPeerGroupEntry
- Table
- rcIpBgpPeerGroupTable
- Siblings
- 40
Syntax
RAPID-CITYEnableValue
- Source
- RAPID-CITYEnableValue
- Base type
Enumeration
Values & Constraints
Type Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpBgpPeerGroupEnable Allows disabling a group of peers | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.8.101.11.1.1 |
| rcIpBgpPeerGroupWeight To assign an absolute weight to a BGP network.
Absolute weight, or importance.
It can be an integer from 0 to 65535. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.11.1.10 |
| rcIpBgpPeerGroupMaxPrefix Sets a limit on the number of routes that will be
accepted from this group of neighbors. A value of zero
indicates no limit | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.11.1.11 |
| rcIpBgpPeerGroupNextHopSelf Set NextHop Attribute to local router address before
sending updates to remote peers | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.101.11.1.12 |
| rcIpBgpPeerGroupRoutePolicyIn Route Policy Name that will be applied to all networks
learned from this group of peers | column | OctetString | .1.3.6.1.4.1.2272.1.8.101.11.1.13 |
| rcIpBgpPeerGroupRoutePolicyOut Route policy name that will be applied to all
outgoing updates to this group of peers | column | OctetString | .1.3.6.1.4.1.2272.1.8.101.11.1.14 |
| rcIpBgpPeerGroupRouteReflectorClient Indicates whether this group of peers is a route reflector client. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.101.11.1.15 |
| rcIpBgpPeerGroupSoftReconfigurationIn If Peer soft reconfiguration is enabled in the in bound
direction, policy can be changed and routes can
re-learned without having to reset the bgp connection.
Enabling soft reconf… | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.8.101.11.1.16 |
| rcIpBgpPeerGroupSoftReconfiguration If Peer soft reconfiguration-in is enabled in the in
bound direction, policy can be changed and routes can
re-learned without having to reset the bgp connection by
setting rcIpBgp… | column | Enumeration | .1.3.6.1.4.1.2272.1.8.101.11.1.17 |
| rcIpBgpPeerGroupPassword To enable MD5 authentication on TCP connections
between this local speaker and this group of BGP peers.
Case-sensitive password of up to 80 character | column | OctetString | .1.3.6.1.4.1.2272.1.8.101.11.1.18 |
| rcIpBgpPeerGroupRemovePrivateAs Enable and disable private AS number from being
stripped when sending an update | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.8.101.11.1.19 |
| rcIpBgpPeerGroupIndex Index in to the Peer Group Table | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.11.1.2 |
| rcIpBgpPeerGroupRowStatus row status | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.8.101.11.1.20 |
| rcIpBgpPeerGroupMD5Authentication Enable and Disable MD5 authentication | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.8.101.11.1.21 |
| rcIpBgpPeerGroupSendCommunity Enables or disables sending the update
message community attribute to the specified
peer. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.8.101.11.1.22 |
| rcIpBgpPeerGroupUpdateSourceInterface The IP address to used for circuitless IP for this peer group. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.101.11.1.23 |
| rcIpBgpPeerGroupVpnv4Address The vpnv4 routes specified. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.8.101.11.1.24 |
| rcIpBgpPeerGroupIpvpnLiteCap The IPVPN-lite capability can be enabled or disabled
on the bgp neighbor peer group. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.8.101.11.1.25 |
| rcIpBgpPeerGroupSooAddress The site-of-origin ipaddress. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.101.11.1.26 |
| rcIpBgpPeerGroupSooAsNumber The asnum for site-of-origin for bgp peer group. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.11.1.27 |
| rcIpBgpPeerGroupSooAssignedNum The Assigned number required along with asnum or
address to configure the site-of-origin for bgp
peer group. | column | Unsigned32 | .1.3.6.1.4.1.2272.1.8.101.11.1.28 |
| rcIpBgpPeerGroupSooType The soo type can be asnum or ipaddress. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.101.11.1.29 |
| rcIpBgpPeerGroupGroupName Name of the BGP peer group to which this neighbor belong | column | OctetString | .1.3.6.1.4.1.2272.1.8.101.11.1.3 |
| rcIpBgpPeerGroupRouteRefresh Route refresh for bgp peer group. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.8.101.11.1.30 |
| rcIpBgpPeerGroupAsOverride The AS Override value can be enabled or disabled for bgp peer group. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.8.101.11.1.31 |
| rcIpBgpPeerGroupAllowAsIn The number of as-in allowed for bgp peer group. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.11.1.32 |
| rcIpBgpPeerGroupDefaultOriginateIpv6 Enabling this attribute allows a BGP speaker
(the local router) to send the default route to
the group of neighbors for use as a default
route. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.101.11.1.33 |
| rcIpBgpPeerGroupAfUpdateSourceInterfaceType The Inet address type used for circuitless IP
for this peer group. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2272.1.8.101.11.1.34 |
| rcIpBgpPeerGroupAfUpdateSourceInterface The Inet address to used for circuitless IP for
this peer group. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2272.1.8.101.11.1.35 |
| rcIpBgpPeerGroupIpv6RoutePolicyIn Ipv6 Route Policy Name that will be applied to all
networks learned from this group of peers | column | OctetString | .1.3.6.1.4.1.2272.1.8.101.11.1.37 |
| rcIpBgpPeerGroupIpv6RoutePolicyOut Ipv6 Route policy name that will be applied to all
outgoing updates to this group of peers | column | OctetString | .1.3.6.1.4.1.2272.1.8.101.11.1.38 |
| rcIpBgpPeerGroupBfdEnable Bfd can be enabled or disabled for bgp peer group. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.101.11.1.39 |
| rcIpBgpPeerGroupRemoteAs Remote Autonomous system number of this peer group
(optional) | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.11.1.4 |
| rcIpBgpPeerGroupDebugMask value is one of multiple (logically by 'OR' of
following value:
none (0),
error(1),
packet(2),
event(4),
trace(8),
warning(16),
… | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.11.1.40 |
| rcIpBgpPeerGroupIpv6MaxPrefix Sets a limit on the number of IPv6 routes that will be
accepted from this group of neighbors. A value of zero
indicates no limit | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.11.1.41 |
| rcIpBgpPeerGroupDefaultOriginate Enabling this attribute allows a BGP speaker
(the local router) to send the default route 0.0.0.0 to
the group of neighbors for use as a default route. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.101.11.1.5 |
| rcIpBgpPeerGroupEbgpMultiHop To accept and attempt BGP connections to external
peers residing on networks that are not directly
connected | column | Enumeration | .1.3.6.1.4.1.2272.1.8.101.11.1.6 |
| rcIpBgpPeerGroupAdvertisementInterval To set the minimum interval between the sending of
BGP routing updates Time in seconds. Integer from 1
to 120. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.11.1.7 |
| rcIpBgpPeerGroupKeepAlive To set the time interval in seconds between the sending
of BGP keep alive messages to remote peers. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.11.1.8 |
| rcIpBgpPeerGroupHoldTime To configure the hold time for the group of peers in
seconds. Usually set to three times the value of the
Keepalive time | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.11.1.9 |