rcIkePolicyAdminState
RC-IKE-MIB ·
.1.3.6.1.4.1.2272.1.86.2.1.14
Object
This object specifies whether the policy is administratively enabled or disabled.
Context
- MIB
- RC-IKE-MIB
- OID
.1.3.6.1.4.1.2272.1.86.2.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIkePolicyEntry
- Table
- rcIkePolicyTable
- Siblings
- 18
Syntax
RAPID-CITYEnableValue
- Source
- RAPID-CITYEnableValue
- Base type
Enumeration
Values & Constraints
Type Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIkePolicyLocalIfIndex This object specifies the Interface Index
of the local address.
Only port and vlan if-index are supported
for this release.
When the value zero is specified on a SET, rcIkePolic… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2272.1.86.2.1.1 |
| rcIkePolicyDPDTimeout This object specifies the Dead Peer
Detection timeout in seconds. | column | Unsigned32 | .1.3.6.1.4.1.2272.1.86.2.1.10 |
| rcIkePolicyP2PFS This object specifies whether or not perfect
forward secrecy is used when refreshing keys.
Enable indicates that PFS SHOULD be used. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.86.2.1.11 |
| rcIkePolicyP2PfsUseIkeGroup This object specifies whether or not to use
the same GroupId (Diffie-Hellman Group) for
phase 2 as was used in phase 1. If P2PFS is
disabled, this entry SHOULD be ignored. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.86.2.1.12 |
| rcIkePolicyP2PfsDHGroup This object specifies the Diffie-Hellman group
to use for phase 2 when the object
rcIkePolicyP2PFS is enabled and the object
rcIkePolicyP2PfsUseIkeGroup is disabled. | column | Enumeration | .1.3.6.1.4.1.2272.1.86.2.1.13 |
| rcIkePolicyOperStatus This object specifies whether the policy
is operationally up or down. | column | Enumeration | .1.3.6.1.4.1.2272.1.86.2.1.15 |
| rcIkePolicyRowStatus This object is used to create or delete
entries in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.86.2.1.16 |
| rcIkePolicyRevocationCheckMethod This object specifies the proposed
revocation-check method for digital-certificate
type authentication-method. | column | Enumeration | .1.3.6.1.4.1.2272.1.86.2.1.17 |
| rcIkePolicyProfileVersion This object maps to the version
of ike profile selected. Default value of
this object is version 1 (v1) | column | Enumeration | .1.3.6.1.4.1.2272.1.86.2.1.18 |
| rcIkePolicyPeerName This object specifies the value of the
Peer name if the authentication method
is set to digital certificate. | column | OctetString | .1.3.6.1.4.1.2272.1.86.2.1.19 |
| rcIkePolicyLocalAddrType This object specifies the type of address
field in the rcIkePolicyLocalAddr.
Only IPv6 address types are supported for
this release. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2272.1.86.2.1.2 |
| rcIkePolicyLocalAddr This object specifies the string
representation of the local peer ID.
The type of value configured for this
object is specified by the
rcIkePolicyLocalAddrType. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2272.1.86.2.1.3 |
| rcIkePolicyRemoteAddrType This object specifies the type of address
field in the rcIkePolicyRemoteAddr.
Only IPv6 address types are supported for
this release. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2272.1.86.2.1.4 |
| rcIkePolicyRemoteAddr This object specifies the string
representation of the remote peer ID.
The type of value configured for this
object is specified by the
rcIkePolicyRemoteAddrType. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2272.1.86.2.1.5 |
| rcIkePolicyName This object specifies the name given to the policy.
The name should be assigned during creation of
the policy. Changing the name after the policy
is created is not allowed. | column | OctetString | .1.3.6.1.4.1.2272.1.86.2.1.6 |
| rcIkePolicyProfileName This object specifies the name of the profile
(rcIkeProfileName) that should be used for
this policy. | column | OctetString | .1.3.6.1.4.1.2272.1.86.2.1.7 |
| rcIkePolicyAuthenticationMethod This object specifies the proposed
authentication method for the phase 1
security association. | column | Enumeration | .1.3.6.1.4.1.2272.1.86.2.1.8 |
| rcIkePolicyPSKValue This object specifies the value of the
Pre-Shared Key if the authentication method
is set to PSK. | column | OctetString | .1.3.6.1.4.1.2272.1.86.2.1.9 |