rcIgmpInterfaceExtnSnoopMRouterLPorts

RC-IGMP-MIB · .1.3.6.1.4.1.2272.1.30.1.1.35
MIB view Table view

Object

column RAPID-CITYLPortSet 
The set of logical ports in this interface that provide
connectivity to an IP Multicast router.

Context

MIB
RC-IGMP-MIB
OID
.1.3.6.1.4.1.2272.1.30.1.1.35
Type
column
Access
readonly
Status
current
Parent
rcIgmpInterfaceExtnEntry
Table
rcIgmpInterfaceExtnTable
Siblings
40

Syntax

RAPID-CITYLPortSet
Source
RAPID-CITYLPortSet
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..256

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcIgmpInterfaceExtnIfIndex
ifindex.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2272.1.30.1.1.1
rcIgmpInterfaceExtnFastLeavePortMembers
The set of ports that are enabled for fast leave.
columnRAPID-CITYPortSet.1.3.6.1.4.1.2272.1.30.1.1.10
rcIgmpInterfaceExtnMrdiscEnable
Enable/disable multicast router discovery.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.11
rcIgmpInterfaceExtnDiscoveredRouterPorts
list of ports that discovered by IGMP Multicast router discovery (MRDISC) protocol.
columnRAPID-CITYPortSet.1.3.6.1.4.1.2272.1.30.1.1.12
rcIgmpInterfaceExtnSnoopMRouterPorts
The set of ports in this interface that provide connectivity to an IP Multicast router.
columnRAPID-CITYPortSet.1.3.6.1.4.1.2272.1.30.1.1.13
rcIgmpInterfaceExtnSnoopActiveMRouterPorts
Active ports.
columnRAPID-CITYPortSet.1.3.6.1.4.1.2272.1.30.1.1.14
rcIgmpInterfaceExtnSnoopMRouterExpiration
Multicast querier router aging time out.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.30.1.1.15
rcIgmpInterfaceExtnFlushAction
IGMP flush action.
columnEnumeration.1.3.6.1.4.1.2272.1.30.1.1.16
rcIgmpInterfaceExtnRouterAlertEnable
Enable Router Alert Check.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.30.1.1.17
rcIgmpInterfaceExtnSsmEnable
enable SSM.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.18
rcIgmpInterfaceExtnIgapEnable
enable/disable IGAP.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.30.1.1.19
rcIgmpInterfaceExtnSnoopEnable
enable snoop.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.2
rcIgmpInterfaceExtnAccntEnable
enable/disable accounting.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.30.1.1.20
rcIgmpInterfaceExtnAuthEnable
enable/disable authentication.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.30.1.1.21
rcIgmpInterfaceExtnStreamLimitEnable
Stream Limitation enable/disable.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.30.1.1.22
rcIgmpInterfaceExtnMaxStreams
Maximum number of stream.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.30.1.1.23
rcIgmpInterfaceExtnNumStreams
Current number of streams.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.30.1.1.24
rcIgmpInterfaceExtnNewQuerier
The address of the New IGMP Querier on the IP subnet to which this interface is attached.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.30.1.1.25
rcIgmpInterfaceExtnSnoopQuerierEnable
enable snoop querier.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.26
rcIgmpInterfaceExtnSnoopQuerierAddr
The pseudo address of the IGMP Snoop Querier.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.30.1.1.27
rcIgmpInterfaceExtnMvrEnable
Enable or disable mcast-vlan-registration on a vlan, it is used to specified a vlan works as a mcast-vlan, maximum 16 mcast-vlan is supported.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.28
rcIgmpInterfaceExtnMvrProxyEnable
enable or disable mcast-vlan-registration proxy on a vlan, you must enable mcast-vlan-registration at first.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.29
rcIgmpInterfaceExtnProxySnoopEnable
enable proxy snoop.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.3
rcIgmpInterfaceExtnDynamicDowngradeEnable
enable dynamic downgrade the IGMP version when older version query message was received.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.30
rcIgmpInterfaceExtnCompatibilityModeEnable
enable v2 v3 compatible mode, which will handle the IGMP v2 message in v3 interface
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.31
rcIgmpInterfaceExtnOperVersion
The operational version of IGMP which is running on this interface.
columnEnumeration.1.3.6.1.4.1.2272.1.30.1.1.32
rcIgmpInterfaceExtnExplicitHostTrackingEnable
Enable the IGMP protocol running in version 3 to track hosts per channels/groups.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.33
rcIgmpInterfaceExtnMcastMode
IGMP interface mode
columnEnumeration.1.3.6.1.4.1.2272.1.30.1.1.34
rcIgmpInterfaceExtnSnoopActiveMRouterLPorts
Active logical ports.
columnRAPID-CITYLPortSet.1.3.6.1.4.1.2272.1.30.1.1.36
rcIgmpInterfaceExtnL2Isid
L2 ISID of the cvlan.
columnInteger32.1.3.6.1.4.1.2272.1.30.1.1.37
rcIgmpInterfaceExtnUpnpFilterEnable
Enable UPnP filtering.The default value of UPnP filter is disabled(false). It will get enabled only when IGMP snooping or SPB-multicast gets enabled on a VLAN or if someone expli…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.38
rcIgmpInterfaceExtnUpnpFilterAddress
IGMP filter UPnP on the IP subnet to which this interface is attached. Default value is 239.255.255.250
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.30.1.1.39
rcIgmpInterfaceExtnMaxAdvertiseIntervalcolumnInteger32.1.3.6.1.4.1.2272.1.30.1.1.4
rcIgmpInterfaceExtnUpnpFilterAddressMask
IGMP filter UPnP address mask. Default value is 255.255.255.255
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.30.1.1.40
rcIgmpInterfaceExtnSnoopOrigin
Indicates how igmp snooping was enabled. Supported values: config - set by user radius - set by radius atribute
columnBits.1.3.6.1.4.1.2272.1.30.1.1.41
rcIgmpInterfaceExtnMinAdvertiseIntervalcolumnInteger32.1.3.6.1.4.1.2272.1.30.1.1.5
rcIgmpInterfaceExtnMaxInitialAdvertiseIntervalcolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.30.1.1.6
rcIgmpInterfaceExtnMaxInitialAdvertmentscolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.30.1.1.7
rcIgmpInterfaceExtnNeighborDeadIntervalcolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.30.1.1.8
rcIgmpInterfaceExtnFastLeaveEnable
Enable fast leave on this interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.30.1.1.9