rcStgEntry

RC-BRIDGE-MIB · .1.3.6.1.4.1.2272.1.13.4.1
MIB view Table view

Object

row 
STG attributes

Context

MIB
RC-BRIDGE-MIB
OID
.1.3.6.1.4.1.2272.1.13.4.1
Type
row
Status
current
Parent
rcStgTable
Table
rcStgTable
Children
27

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects
ObjectTypeSyntaxOID
rcStgId
An identifier used to identify a STG in the device.
columnInteger32.1.3.6.1.4.1.2272.1.13.4.1.1
rcStgDesignatedRoot
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter i…
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.2272.1.13.4.1.10
rcStgRootCost
The cost of the path to the root as seen from this bridge.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.13.4.1.11
rcStgRootPort
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.13.4.1.12
rcStgMaxAge
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value th…
columnBRIDGE-MIBTimeout.1.3.6.1.4.1.2272.1.13.4.1.13
rcStgHelloTime
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hund…
columnBRIDGE-MIBTimeout.1.3.6.1.4.1.2272.1.13.4.1.14
rcStgHoldTime
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.13.4.1.15
rcStgForwardDelay
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines h…
columnBRIDGE-MIBTimeout.1.3.6.1.4.1.2272.1.13.4.1.16
rcStgBridgeMaxAge
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of rcS…
columnInteger32.1.3.6.1.4.1.2272.1.13.4.1.17
rcStgBridgeHelloTime
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may retu…
columnInteger32.1.3.6.1.4.1.2272.1.13.4.1.18
rcStgBridgeForwardDelay
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value …
columnInteger32.1.3.6.1.4.1.2272.1.13.4.1.19
rcStgTaggedBpduAddress
The MAC address to be assigned to the destination mac address field in tagged BPDUs. The default address is the well known multicast group address 01-80-c2-00-00…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2272.1.13.4.1.2
rcStgEnableStp
Indicate whether the spanning tree protocol should be active in this STG.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.13.4.1.20
rcStgStpTrapEnable
Indicate whether traps relating to the spanning tree protocol should be sent for this STG.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.13.4.1.21
rcStgPortMembers
A bitfield used to identify which ports in the system are members this STG. The bitfield is 32 octets long representing ports 0 to 255 (inclusive).
columnOctetString.1.3.6.1.4.1.2272.1.13.4.1.22
rcStgRowStatus
Row status.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2272.1.13.4.1.23
rcStgPortStpState
Every 2 bitfields used to identify a port state in this STG. Port state is cataloged as non-stp(0), blocking(1), learning(2), and forwarding(3).
columnOctetString.1.3.6.1.4.1.2272.1.13.4.1.24
rcStgType
Type of Stg.
columnEnumeration.1.3.6.1.4.1.2272.1.13.4.1.25
rcStgNtStgEnable
Indicates whether this STG is Operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.13.4.1.26
rcStgLPortMembers
A bitfield used to identify which logical ports (for example, WLAN tunnels) in the system are members of this STG. The bitfield is 256 octets long representing ports 704 to 275…
columnRAPID-CITYLPortSet.1.3.6.1.4.1.2272.1.13.4.1.27
rcStgTaggedBpduVlanId
The VLAN ID to be used for tagging BPDUs.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.13.4.1.3
rcStgBridgeAddress
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2272.1.13.4.1.4
rcStgNumPorts
The number of ports controlled by this bridging entity.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.13.4.1.5
rcStgProtocolSpecification
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementat…
columnEnumeration.1.3.6.1.4.1.2272.1.13.4.1.6
rcStgPriority
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the valu…
columnInteger32.1.3.6.1.4.1.2272.1.13.4.1.7
rcStgTimeSinceTopologyChange
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.13.4.1.8
rcStgTopChanges
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2272.1.13.4.1.9
Indexes
ObjectTypeSyntaxOID
rcStgId
An identifier used to identify a STG in the device.
columnInteger32.1.3.6.1.4.1.2272.1.13.4.1.1