rc2kCpuSerialPortPeerAddr
RC-2K-MIB ·
.1.3.6.1.4.1.2272.1.100.3.1.9
Object
Used to configure the peer's IP address. Used for both 'slip' and 'ppp' modes.
Context
- MIB
- RC-2K-MIB
- OID
.1.3.6.1.4.1.2272.1.100.3.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rc2kCpuSerialPortEntry
- Table
- rc2kCpuSerialPortTable
- Siblings
- 12
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rc2kCpuSerialPortIfIndex IfIndex for this port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.100.3.1.1 |
| rc2kCpuSerialPortSlipMtu Used to configure the MTU for this port.
Used for slip only. | column | Integer32 | .1.3.6.1.4.1.2272.1.100.3.1.10 |
| rc2kCpuSerialPortSlipTxRxCompress Used to enable/disable compression of TCP/IP
packet headers on this port. Used for slip only. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.3.1.11 |
| rc2kCpuSerialPortSlipRxCompress Used to enable/disable compression for receiving
packets on this port. Used for slip only. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.3.1.12 |
| rc2kCpuSerialPortPppConfigFile Used to configure the configuration file to use
for PPP. | column | OctetString | .1.3.6.1.4.1.2272.1.100.3.1.13 |
| rc2kCpuSerialPortDescr Port description. | column | OctetString | .1.3.6.1.4.1.2272.1.100.3.1.2 |
| rc2kCpuSerialPortMode Used to configure the mode this port should
operate in. | column | Enumeration | .1.3.6.1.4.1.2272.1.100.3.1.3 |
| rc2kCpuSerialPortAdminStatus Used to configure the administrative status
setting for this port. | column | Enumeration | .1.3.6.1.4.1.2272.1.100.3.1.4 |
| rc2kCpuSerialPortOperStatus Used to indicate the operational status
setting for this port. | column | Enumeration | .1.3.6.1.4.1.2272.1.100.3.1.5 |
| rc2kCpuSerialPortBaudRate Used to configure the baud rate of this port. | column | Enumeration | .1.3.6.1.4.1.2272.1.100.3.1.6 |
| rc2kCpuSerialPortDataBits Used to configure the number of data bits, per
byte of data, this port should send/receive. | column | Enumeration | .1.3.6.1.4.1.2272.1.100.3.1.7 |
| rc2kCpuSerialPortMyAddr Used to configure this port's IP address.
Used for both 'slip' and 'ppp' modes. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.100.3.1.8 |