rc2kCardFrontType

Used to indicate card types in the Accelar
8000 product families.
              
	For Accelar 8000 devices, all cards use
	an encoded value according to the following rule:
              
	Exampe: 
     Titan VSP7400-(port configuration)
     Seadart: VSP4600-12mu-12xLM-1VIM
              
	dash '-' cannot be used in the MIB defintion. Using 'x'
	to instead.
              
	Port and Port Type representation:
              
	  t for 10/100/1000
	  p for 10/100/1000 30W PoE
	  u for 10/100/1000 60W PoE
	  w for 10/100/1000 90W PoE
	  x for SFP/SFP+
	  m for multirate (2.5G/5G/10G)
	  v for 25Gbe
	  q for 40GbE
	  c for 100GbE
  LM = Long Reach Multimode and MACsec (port has PHYs)
  The -1VIM means the switch has a VIM slot 
              
|   6  |   1   |   5   |   4   |  1 |   3   |  4   |      8      |
+------+-------+-------+-------+------------+------+------+------+
bits  : |31-26 |    25 | 24-20 | 19-16 | 15 | 14-12 | 11-8 |     7-0     |
+------+-------+-------+-------+----+-------+------+------+------+
field : |  a   |   b   |   c   |   d   |  e |    f  |  g   |      h      |
+------+-------+-------+-------+----+-------+------+------+------+
              
a : Family type/Product line (6 bits (5 bits usuable) (was 4 bits))
MSB bit31 should not be used (MIB compiler fails)
0x0-00 = 0000-00 = Reserved
0x1-00 = 0001-00 = Monoploy non specific (e.g backplane, psu, fans)
0x2-00 = 0010-00 = Boardwalk
0x2-01 = 0010-01 = Power Ranger
0x3-00 = 0011-00 = Marvin Gardens
0x3-01 = 0011-01 = DSG8032
0x3-11 = 0011-11 = i86 Family (DSG9032, DSG8064)
0x4-00 = 0100-00 = Cobalt Blue (was Thunderbolt and Pacific before that - both are obsolete)
0x4-01 = 0100-01 = Ring Of Fire
0x4-10 = 0100-10 = VSP4K
0x4-11 = 0100-11 = VSP8k, VSP7k, VSP7400	    
0x5-00 = 0101-00 = PP8300 (was ParkPlace)
0x5-01 = 0101-01 = VSP9400
0x6-00 = 0110-00 = Central Office (only used in chassis)
0x7-00 = 0111-00 = Alteon WebSystems
0x7-01 = 0111-01 = VSP5K IcePick
0x7-02 = 0111-10 = VSP4900
              
              
b : Interface / Device type variation: (Were 3 bits, 2 bits taken by family)
0x1 = 0 = Non M-Module 
0x1 = 1 = M-module (128K RARU records)
0x0 = 0 = VSP4k No Mgmt port
0x1 = 1 = VSP8K With Mgmt Port
              
c : Interface / device type:
0x0 = 00000 = CPU
0x1 = 00001 = Switch fabric
0x2 = 00010 = Copper Ethernet
0x3 = 00011 = Fiber Ethernet
0x4 = 00100 = Sonet (Packets)
0x5 = 00101 = ATM
0x6 = 00110 = Token Ring
0x7 = 00111 = RMON
0x8 = 01000 = BFM (Frame or cells indicated by field 'a' above)
0x9 = 01001 = PSU
0xa = 01010 = Fan Tray
0xb = 01011 = Chassis/Backplane
0xc = 01100 = CPU Mezz
0xd = 01101 = SSL
0xe = 01110 = Launch Pad
0xf = 01111 = Chassis/Midplane
0x10 = 10000 = Auxillary Card
0x11 = 10001 = CPU w/256M SDRAM
0x12 = 10010 = Single Card Switch (Copper Type)
0x13 = 10011 = WSM Fiber Ethernet
0x14 = 
0x16 = 10110 = Single Card Switch (Fiber Type)
0x17 = 10111 = Single Card Switch (Combo port type)
              
d : Maximum speed (highest negotiable speed)
0x0 = 0000 = 10 Mbit  
0x1 = 0001 = 100 Mbit  
0x2 = 0010 = 1 Gbit
0x3 = 0011 = 10 Gbit
0x4 = 0100 = OC-3
0x4 = 0100 = 40 Gbit for VSP 
0x5 = 0101 = OC-12
0x5 = 0101 = 100 Gbit for VSP
0x6 = 0110 = OC-48
0x7 = 0111 = OC-92
0x8 = 1000 = OC-192
0x9 = 1001 = 4 Mbit (TR)
0xa = 1010 = 16 Mbit (TR)
0xb = 1011 = E3 
0xc = 1100 = DS1
0xd = 1101 = DS3
0xe = 1110 = none (no PHY interfaces on board)
0xf = 1111 = Max speed indicated implicitly in field (c) (for expansion)
              
e : 0=non-redundant,  (1 bit)
1=redundant
For Line card or MDA
0 = prototype 1 = Product
              
f : Card specific info. (3 bits)
For Gigabit used as follows:
000=short-haul (SX)
010=long-haul (LX)
100=extra-distance (DX)
101=GBIC
For 10 Gigabit used as follws
000 = 10GE WAN serial 1310nm (XLW)
001 = 10GE WAN serial 1550nm (XEW)
100 = 10GE LAN serial 1310nm (XLR)
101 = 10GE LAN serial 1550nm (XER)
110 = 10GE LAN serial 1310nm (XLRSJ)
For ATM/Sonet used as follows
000 = multi mode
001 = single mode
010 = single or multimode
011 = not applicable (e.g., copper has no mode)
For Marvin Gardens, indicates number of MDA slots
000 = none
001 = one option slots
010 = two option slots
011 = three option slots
For Power Supplies:
000 = AC PSU
001 = DC PSU
010 = PoE 1770W AC PSU
011 = PoE 1400W AC PSU
For SSL:
000 = server offloading
001 = end to end encryption
For WSM:
000 = WSM mode
001 = ASFM mode
              
For 8003 (3 slot) chassis differentiation:
000 = ERS 8003
001 = MERS 8003-R (Triumph)
              
For PP8300 I/O or CP:
000: PP8300 48TX, 10/100/1000 without POL
001: PP8300 48TX, 10/100/1000 with POL
010: SFP
000: non SFP
For Cobra Chassis:
001: 12G
010: 24G
100: 48T
For SF:
000 = 3200 card
001 = 9600 card
010 = 9400 card
For Copper Ethernet:
000: no POE
001: POE
For FAN Tray:
000: CP
001: IO	
For Objects with no options:
000: CPU, Mezz, OPM, SAS, IPFIX		 
For VSP4K/6K/9400:
000: no POE 
001: POE
010: SFP+
011: COPPER
For Chassis :
000: Non-Trident2+
100: Trident2 +
              
g : Chassis type (4 bits, possibly MSB 2 bits are extension of field b)
Using the upper bit to indicate the High temperature of the chassis type
0x0 = 0000 = work-group (single card switches, etc)
0x1 = 0001 = back-bone (chassis based products)
0x2 = 0010 = MDA (option modules)
0x3 = 00-11 = mid-plane (chassis based products)
0x8 = 1000 = High Temperature single card switches
0x4 = x1xx = equal to APLS device
              
h : Number of ports (binary representation obmited)
(for ACIM/BFM cards, this is number of octapids/blackbirds/dea)
0x00 =  no ports (cpus, switch fabrics)
0x01 =  1-port, 
0x02 =  2-port, 
0x04 =  4-port,
0x06 =  6-port,
0x08 =  8-port,
0x0c = 12-port,
0x10 = 16-port,
0x18 = 24-port,
0x22 = 36-port,
0x30 = 48-port,
0x40 = 64-port.

MIB

RC-2K-MIB

OID

.1.3.6.1.4.1.2272.1.100.6.1.2

Type

column

Access

readonly

Status

current

Parent

rc2kCardEntry

Table

rc2kCardTable

Siblings

34