rbnUdpL2VpnStaticIfIndexOrZero

RBN-L2VPN-MIB · .1.3.6.1.4.1.2352.2.39.6.1.1.10
MIB view Table view

Object

column IF-MIBInterfaceIndexOrZero 
This object indicates whether there is a corresponding entry of
this UDP L2 VPN access circuit in the ifTable. A non-zero value
indicates the ifIndex of the entry in the ifTable. A value of zero
indicates that there is no entry (for example, a
pre-provisioned access circuit is used).

Context

MIB
RBN-L2VPN-MIB
OID
.1.3.6.1.4.1.2352.2.39.6.1.1.10
Type
column
Access
readonly
Status
current
Parent
rbnUdpL2VpnStaticEntry
Table
rbnUdpL2VpnStaticTable
Siblings
13

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32

Values & Constraints

Type Constraints
range: 0..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rbnUdpL2VpnStaticPeerPort
This object indicates the peer port number for this UDP L2 VPN circuit.
column-.1.3.6.1.4.1.2352.2.39.6.1.1.1
rbnUdpL2VpnStaticPwFlags
This object indicates more detailed information on the status of this UDP L2 VPN circuit. This object is a bit field so it may contain one or more of these values.
columnRbnVpnPwFlagsType.1.3.6.1.4.1.2352.2.39.6.1.1.11
rbnUdpL2vpnStaticDscpCode
Diffserver code for the CES over UDP PW. Default is Zero. The dscp code values are listed as follows: 0..63 Differentiated services codepoint value af11 Assured …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2352.2.39.6.1.1.12
rbnUdpL2VpnStaticPwState
This object indicates the status of this UDP L2 VPN circuit. A value of up(1) indicates that the VPN circuit is active i.e. connected with its remote site. A value of down(2) indi…
columnRbnVpnPwStateType.1.3.6.1.4.1.2352.2.39.6.1.1.13
rbnUdpL2VpnStaticPsnType
This object indicates the packet switched networks(PSN) type for this UDP L2 VPN circuit.
columnRbnVpnPsnType.1.3.6.1.4.1.2352.2.39.6.1.1.14
rbnUdpL2VpnStaticPeerAddressType
This object indicates the peer IP address type for this UDP L2 VPN circuit.
column-.1.3.6.1.4.1.2352.2.39.6.1.1.2
rbnUdpL2VpnStaticPeerAddress
This object indicates the peer IP address for this UDP L2 VPN circuit. The peer address type is determined by the value of the corresponding rbnUdpL2VpnStaticPeerAddressType.
column-.1.3.6.1.4.1.2352.2.39.6.1.1.3
rbnUdpL2VpnStaticSourceAddressType
This object indicates the source IP address type for this UDP L2 VPN circuit.
column-.1.3.6.1.4.1.2352.2.39.6.1.1.4
rbnUdpL2VpnStaticSourceAddress
This object indicates the source IP address for this UDP L2 VPN circuit. The source address type is determined by the value of the corresponding rbnUdpL2VpnStaticSourceAddressType.
column-.1.3.6.1.4.1.2352.2.39.6.1.1.5
rbnUdpL2VpnStaticSourcePort
This object indicates the source port number for this UDP L2 VPN circuit.
column-.1.3.6.1.4.1.2352.2.39.6.1.1.6
rbnUdpL2vpnStaticAccessCctHandle
This object indicates the internal representation of the access circuit for this UDP L2 VPN circuit.
columnRBN-TCRbnCircuitHandle.1.3.6.1.4.1.2352.2.39.6.1.1.7
rbnUdpL2VpnStaticVpnCctHandle
This object indicates the internal representation of this UDP L2 VPN circuit.
columnRBN-TCRbnCircuitHandle.1.3.6.1.4.1.2352.2.39.6.1.1.8
rbnUdpL2VpnStaticInputCctUp
This object indicates the status of this UDP L2 VPN circuit. A value of true indicates that the VPN circuit is connected with it's remote site. A value of false indicates that th…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2352.2.39.6.1.1.9