rcfJobProtocol
RBN-CONFIG-FILE-MIB ·
.1.3.6.1.4.1.2352.2.13.1.1.3.1.3
Object
column
r/w
Enumeration
The file transfer protocol to use.
If 'local', the filename specified in rcfJobFilename exists
locally on the Redback system (eg in /flash).
If 'tftp', the filename specified in rcfJobFilename will be
read/written from/to the system identified by rcfJobIpAddress
via the TFTP file transfer protocol.
If 'ftp', the filename specified in rcfJobFilename will be
read/written from/to the system identified by rcfJobIpAddress
via the FTP file transfer protocol. The values in
rcfJobUsername and rcfJobPassword will be used for
authentication. rcfJobPassiveMode can be used to
enable/disable FTP's passive mode.
Context
- MIB
- RBN-CONFIG-FILE-MIB
- OID
.1.3.6.1.4.1.2352.2.13.1.1.3.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcfJobEntry
- Table
- rcfJobTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | local |
1 | tftp |
2 | ftp |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcfJobIndex A unique identifier for an entry in this table. | column | Unsigned32 | .1.3.6.1.4.1.2352.2.13.1.1.3.1.1 |
| rcfJobStopAtLine If this object instance has a non-zero value, parsing and
loading of the configuration file will terminate after the
specified line number.
This object is only rele… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2352.2.13.1.1.3.1.10 |
| rcfJobSaveDefaults If 'true', default values for all configuration values are
saved. If 'false', only the values which have been explicitly
configured are saved.
This object is only r… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.13.1.1.3.1.11 |
| rcfJobState The current state of the configuration job.
pending -- The initial state of all jobs. Jobs are queued
and processed in order of creation.
inProgres… | column | Enumeration | .1.3.6.1.4.1.2352.2.13.1.1.3.1.12 |
| rcfJobResult A generic result code. This object is instantiated only when
rcfJobStatus equals 'completed'.
success -- The job completed successfully.
other -- An error t… | column | Enumeration | .1.3.6.1.4.1.2352.2.13.1.1.3.1.13 |
| rcfJobErrorMsgs Detailed error messages generated during the configuration
operation. This object is instantiated only when rcfJobState
equals 'completed'.
Note: the amount of erro… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2352.2.13.1.1.3.1.14 |
| rcfJobCreateTime The value of sysUpTime when this job entry was created. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2352.2.13.1.1.3.1.15 |
| rcfJobStartTime The value of sysUpTime when rcfJobState moved from 'pending' to
'inProgress'.
This object will not be instantiated until rcfJobState moves to
'inProgress'. The obje… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2352.2.13.1.1.3.1.16 |
| rcfJobStopTime The value of sysUpTime when the job completed.
This object will not be instantiated until rcfJobState moves to
'completed'. The object will be un-instantiated if
rc… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2352.2.13.1.1.3.1.17 |
| rcfJobNotifyOnCompletion If 'true', an rcfJobCompleted notification will be generated
when the job completes. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.13.1.1.3.1.18 |
| rcfJobOwner This object can be used to identify who/what/where created this
job entry. | column | RMON-MIBOwnerString | .1.3.6.1.4.1.2352.2.13.1.1.3.1.19 |
| rcfJobOp The configuration operation to perform.
If 'load', the file specified in rcfJobFilename is retrieved,
parsed and loaded into the system configuration.
… | column | Enumeration | .1.3.6.1.4.1.2352.2.13.1.1.3.1.2 |
| rcfJobRowStatus The row status for creating, modifying, or deleting an entry
in the table.
Note that 'active' entries cannot be modified.
Any attempt to modify an object in this … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2352.2.13.1.1.3.1.20 |
| rcfJobFilename The name of the source file (loads) or destination file (saves). | column | OctetString | .1.3.6.1.4.1.2352.2.13.1.1.3.1.4 |
| rcfJobIpAddressType The address type for rcfJobIpAddress.
This object is only relevant for non-local filenames. If
rcfJobProtocol equals 'local', any value for this object
will effecti… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2352.2.13.1.1.3.1.5 |
| rcfJobIpAddress The IP address for the file server which contains the source
file (loads) or destination file (saves).
This object is only relevant for non-local filenames. If
rcfJ… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2352.2.13.1.1.3.1.6 |
| rcfJobUsername The username to use for authentication with the file server.
This object is only relevant for the FTP protocol. If
rcfJobProtocol does not equal 'ftp', any value fo… | column | OctetString | .1.3.6.1.4.1.2352.2.13.1.1.3.1.7 |
| rcfJobPassword The password to use for authentication with the file server.
A zero-length string value would be used for usernames that
do not require a password.
This object is o… | column | OctetString | .1.3.6.1.4.1.2352.2.13.1.1.3.1.8 |
| rcfJobPassiveMode Enables/disables passive mode on FTP connections.
This object is only relevant for the FTP protocol. If
rcfJobProtocol does not equal 'ftp', any value for this
obje… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.13.1.1.3.1.9 |