raqmonParticipantReportCaps

RAQMON-MIB · .1.3.6.1.2.1.16.31.1.1.1.1.3

Object

column Bits
The Report capabilities of the participant, as perceived
by the Collector.
              
If the participant can report the Data Source Name as
defined in [RFC4710], Section 5.3, then the
raqmonPartRepDsrcName bit will be set.
              
If the participant can report the Receiver Name as
defined in [RFC4710], Section 5.4, then the
raqmonPartRepRecvName bit will be set.
              
If the participant can report the Data Source Port as
defined in [RFC4710], Section 5.5, then the
raqmonPartRepDsrcPort bit will be set.
              
If the participant can report the Receiver Port as
defined in [RFC4710], Section 5.6, then the
raqmonPartRepRecvPort bit will be set.
              
If the participant can report the Session Setup Time as
defined in [RFC4710], Section 5.7, then the
raqmonPartRepSetupTime bit will be set.
              
If the participant can report the Session Setup Delay as
defined in [RFC4710], Section 5.8, then the
raqmonPartRepSetupDelay bit will be set.
              
If the participant can report the Session Duration as
defined in [RFC4710], Section 5.9, then the
raqmonPartRepSessionDuration bit will be set.
              
If the participant can report the Setup Status as
defined in [RFC4710], Section 5.10, then the
raqmonPartRepSetupStatus bit will be set.
              
If the participant can report the Round-Trip End-to-end
Network Delay as defined in [RFC4710], Section 5.11,
then the raqmonPartRepRTEnd2EndNetDelay bit will be set.
              
If the participant can report the One-way End-to-end
Network Delay as defined in [RFC4710], Section 5.12,
then the raqmonPartRepOWEnd2EndNetDelay bit will be set.
              
If the participant can report the Application Delay as
defined in [RFC4710], Section 5.13, then the
raqmonPartApplicationDelay bit will be set.
              
If the participant can report the Inter-Arrival Jitter
as defined in [RFC4710], Section 5.14, then the
raqmonPartRepIAJitter bit will be set.
              
If the participant can report the IP Packet Delay
Variation as defined in [RFC4710], Section 5.15, then
the raqmonPartRepIPDV bit will be set.
              
If the participant can report the number of application
packets received as defined in [RFC4710], Section 5.16,
then the raqmonPartRepRcvdPackets bit will be set.
              
If the participant can report the number of application
octets received as defined in [RFC4710], Section 5.17,
then the raqmonPartRepRcvdOctets bit will be set.
              
If the participant can report the number of application
packets sent as defined in [RFC4710], Section 5.18, then
the raqmonPartRepSentPackets bit will be set.
              
If the participant can report the number of application
octets sent as defined in [RFC4710], Section 5.19, then
the raqmonPartRepSentOctets bit will be set.
              
If the participant can report the number of cumulative
packets lost as defined in [RFC4710], Section 5.20, then
the raqmonPartRepCumPacketsLoss bit will be set.
              
If the participant can report the fraction of packet
loss as defined in [RFC4710], Section 5.21, then the
raqmonPartRepFractionPacketsLoss bit will be set.
              
If the participant can report the number of cumulative
discards as defined in [RFC4710], Section 5.22, then the
raqmonPartRepCumDiscards bit will be set.
              
If the participant can report the fraction of discards
as defined in [RFC4710], Section 5.23, then the
raqmonPartRepFractionDiscards bit will be set.
              
If the participant can report the Source Payload Type as
defined in [RFC4710], Section 5.24, then the
raqmonPartRepSrcPayloadType bit will be set.
              
If the participant can report the Destination Payload
Type as defined in [RFC4710], Section 5.25, then the
raqmonPartRepDestPayloadType bit will be set.
              
If the participant can report the Source Layer 2
Priority as defined in [RFC4710], Section 5.26, then the
raqmonPartRepSrcLayer2Priority bit will be set.
              
If the participant can report the Source DSCP/ToS value
as defined in [RFC4710], Section 5.27, then the
raqmonPartRepSrcToSDscp bit will be set.
              
If the participant can report the Destination Layer 2
Priority as defined in [RFC4710], Section 5.28, then the
raqmonPartRepDestLayer2Priority bit will be set.
              
If the participant can report the Destination DSCP/ToS
Value as defined in [RFC4710], Section 5.29, then the
raqmonPartRepDestToSDscp bit will be set.
              
If the participant can report the CPU utilization as
defined in [RFC4710], Section 5.30, then the
raqmonPartRepCPU bit will be set.
              
If the participant can report the memory utilization as
defined in [RFC4710], Section 5.31, then the
raqmonPartRepMemory bit will be set.
              
If the participant can report the Application Name as
defined in [RFC4710], Section 5.32, then the
raqmonPartRepAppName bit will be set.
              
The capability of reporting of a specific metric does
not mandate that the metric must be reported permanently
by the data source to the respective collector.  Some
data sources MAY be configured not to send a metric, or
some metrics may not be relevant to the specific
application.

Context

MIB
RAQMON-MIB
OID
.1.3.6.1.2.1.16.31.1.1.1.1.3
Type
column
Access
readonly
Status
current
Parent
raqmonParticipantEntry
Table
raqmonParticipantTable
Siblings
50

Syntax

Bits

Values & Constraints

Enumerated Values
0raqmonPartRepDsrcName
1raqmonPartRepRecvName
2raqmonPartRepDsrcPort
3raqmonPartRepRecvPort
4raqmonPartRepSetupTime
5raqmonPartRepSetupDelay
6raqmonPartRepSessionDuration
7raqmonPartRepSetupStatus
8raqmonPartRepRTEnd2EndNetDelay
9raqmonPartRepOWEnd2EndNetDelay
10raqmonPartApplicationDelay
11raqmonPartRepIAJitter
12raqmonPartRepIPDV
13raqmonPartRepRcvdPackets
14raqmonPartRepRcvdOctets
15raqmonPartRepSentPackets
16raqmonPartRepSentOctets
17raqmonPartRepCumPacketsLoss
18raqmonPartRepFractionPacketsLoss
19raqmonPartRepCumDiscards
20raqmonPartRepFractionDiscards
21raqmonPartRepSrcPayloadType
22raqmonPartRepDestPayloadType
23raqmonPartRepSrcLayer2Priority
24raqmonPartRepSrcTosDscp
25raqmonPartRepDestLayer2Priority
26raqmonPartRepDestTosDscp
27raqmonPartRepCPU
28raqmonPartRepMemory
29raqmonPartRepAppName

Related Objects

Sibling Objects