rsIpsecSaIpcompOutAddress

RAPID-IPSEC-SA-MON-MIB-EXT · .1.3.6.1.4.1.4355.3.1.1.6.1.1
MIB view Table view

Object

column SNMPv2-SMIIpAddress 
The destination address of the SA.
              
If the IPCOMP SA is shared across multiple SAs in protection
suites, this value may be 0.
              
For implementations that do not support IPv6, this address
should appear as one of the IPv4-mapped IPv6 addresses as
defined in Section 2.5.4 of [IPV6AA].
              
Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is
used for IPv4 only nodes, while the prefix
'0000:0000:0000:0000:0000:0000:' is used for bi-lingual
nodes.

Context

MIB
RAPID-IPSEC-SA-MON-MIB-EXT
OID
.1.3.6.1.4.1.4355.3.1.1.6.1.1
Type
column
Access
readonly
Status
current
Parent
rsIpsecSaIpcompOutEntry
Table
rsIpsecSaIpcompOutTable
Siblings
14

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rsIpsecSaIpcompOutCreator
The creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE, or b…
columnIpsecSaCreatorIdent.1.3.6.1.4.1.4355.3.1.1.6.1.10
rsIpsecSaIpcompOutEncapsulation
The type of encapsulation used by this SA.
columnIPSEC-ISAKMP-IKE-DOI-TCIpsecDoiEncapsulationMode.1.3.6.1.4.1.4355.3.1.1.6.1.11
rsIpsecSaIpcompOutCompAlg
A unique value representing the compression algorithm applied to traffic.
columnIPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIpcompTransform.1.3.6.1.4.1.4355.3.1.1.6.1.12
rsIpsecSaIpcompOutSeconds
The number of seconds that the SA has existed.
columnseconds SNMPv2-SMICounter32.1.3.6.1.4.1.4355.3.1.1.6.1.13
rsIpsecSaIpcompOutUserOctets
The amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic expirati…
columnbytes SNMPv2-SMICounter32.1.3.6.1.4.1.4355.3.1.1.6.1.14
rsIpsecSaIpcompOutPackets
The number of packets handled by the SA.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4355.3.1.1.6.1.15
rsIpsecSaIpcompOutCpi
The CPI of the SA. Since the lower values of CPIs are reserved to be the same as the algorithm, the syntax for this object is the same as the transform.
columnIPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIpcompTransform.1.3.6.1.4.1.4355.3.1.1.6.1.2
rsIpsecSaIpcompOutSourceId
The source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation, or 0 if this SA is used with multiple SAs in protection suites. Thi…
columnOctetString.1.3.6.1.4.1.4355.3.1.1.6.1.3
rsIpsecSaIpcompOutSourceIdType
The type of identifier presented by 'rsIpsecSaIpcompOutSourceId', or 0 if unknown or if the SA uses transport mode encapsulation, or 0 if this SA is used with multiple SAs in prot…
columnIPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIdentType.1.3.6.1.4.1.4355.3.1.1.6.1.4
rsIpsecSaIpcompOutDestId
The destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation, or 0 if this SA is used with multiple SAs in protection suites. …
columnOctetString.1.3.6.1.4.1.4355.3.1.1.6.1.5
rsIpsecSaIpcompOutDestIdType
The type of identifier presented by 'rsIpsecSaIpcompOutDestId', or 0 if unknown or if the SA uses transport mode encapsulation, or 0 if this SA is used with multiple SAs in protec…
columnIPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIdentType.1.3.6.1.4.1.4355.3.1.1.6.1.6
rsIpsecSaIpcompOutProtocol
The transport-layer protocol number that this SA carries, or 0 if it carries any protocol.
columnInteger32.1.3.6.1.4.1.4355.3.1.1.6.1.7
rsIpsecSaIpcompOutSourcePort
The source port number of the protocol that this SA carries, or 0 if it carries any port number.
columnInteger32.1.3.6.1.4.1.4355.3.1.1.6.1.8
rsIpsecSaIpcompOutDestPort
The destination port number of the protocol that this SA carries, or 0 if it carries any port number.
columnInteger32.1.3.6.1.4.1.4355.3.1.1.6.1.9